BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Jan 17, 2006 Available from 4-20 mm, Quadro 15 PLUS is suited for cutting stainless steel, steel, cast iron, and other non-ferrous materials. It can achieve hole quality of H7 and surface finish of Ra 0.8 µ. All sizes are coolant through and have Balzers coating. Available from 1-4 mm in increments of 0.1 mm, solid carbide Phoenix Drill features smooth Balzers coating and point and flute geometry. Internal coolant for diameters starting at 2.5 mm makes it suited for extra-hard and non-ferrous materials.

Esco Tool    Medfield, MA 02052
Jan 16, 2006 Air-powered MILLHOG® Fin Tube Removal Tool clamps to tube ID and features blade design that separates fin from tube and then bevels tube end in one step. With no reaction torque to user, chatter-free tool can remove up to 4 in. of fin from tube OD in under 2 min. Product may be used in any position, and cutter blade is made of resharpenable tool steel. While heavy-duty rack and pinion feed mechanism ensures smooth operation, no cutting lubricants are required.

Riverstone Networks    Santa Clara, CA 95054
Jan 16, 2006 MPLS-based Model 15100 supports up to 20 triple-speed copper or fiber downlinks and 4 Gig-E uplinks, while Model 15200 supports dual 10 Gig-E uplinks. Both accept VPLS, RFC-2547 MPLS-VPNs, and Layer 3 routing protocols including BGP, OSPF, multicast, and IS-IS. Routers give service providers ability to maintain single operational model as well as mix-and-match VLAN and MPLS access technologies, helping optimize functionality in large and small network deployments.

Eraser Company, Inc., The    Syracuse, NY 13221
Jan 13, 2006 Available with coil weight capacities from 55-150 lb, models CW10, CW20, and CW30 incorporate adjustable friction clutch to prevent overruns in dereeling operations. Products have variable coil dimensions (IDs) from 5-27 in. as well as capacity lengths from 1,000 ft of 1/8 in. dia wires up to 300 ft of ¾ in. dia wires. Uses include dereeling, measuring, cutting, and reeling operations by production kitters, jobbers, and electrical contractors.

Thomas & Betts Corp.    Memphis, TN 38125
Jan 13, 2006 Single set of standard hand tool dies for all 3 Sta-Kon® power crimp tools offers interchangeability, consistent crimping, and inventory reduction. Dies are compatible with BAIR22-6 Bench-Top Air Tool, PAIR22-6 Portable Air Tool, and BAT22-6 Battery-Powered Hand Tool, all of which crimp insulated and non-insulated terminals from 22-6 AWG. Full crimp cycle is completed in under 1 sec with pneumatic tools and under 2 sec with battery-powered BAT22-6.

Manchester Tool Co.    Akron, OH 44319 3998
Jan 12, 2006 Designed to aid in chip management, MTC-SEPARATOR Xtra (MTC-SX) Cutoff Inserts are available in 4 grades: M40 (-36), M43 (-13), M45 (-33), and M93 (-34). Each incorporates double V design that lends to stability as well as application-specific geometry that lends to surface finish quality and minimizes cutting pressure. Also available, MTC-SX-Ultra inserts feature application-specific geometry for hard-to-machine materials.

Heinrich Co.    Racine, WI 53403
Jan 12, 2006 Using standard 5C collets, hardened and ground 1-AC Air Collet Fixture holds up to 1 1/8 in. stock or through-stock up to 1 7/64 in. Step-chuck collets and expanding collets can also be used. With max recommended air pressure of 120 psi, double-acting, piston type air cylinder develops holding power 18 x air line pressure. Featuring 2 lugs for mounting, holder can be mounted horizontally or vertically. Base accommodates chip removal and coolant flow.

Bystronic, Inc.    Elgin, IL 60123
Jan 11, 2006 Based on 5,200 W resonator, Byspeed 4020 features Adaptive Radius Control technology, which provides automatic optimization of beam diameter to best process various sheet metal thicknesses and types. DHM drive technology delivers acceleration rates up to 3 G's along X and Y axis. Fully enclosed work zone maintains positive work environment, ensuring minimal noise and dust emissions, while telescoping, retractable door provides access to cutting area.

Solvent Kleene, Inc.    Peabody, MA 01960-5146
Jan 10, 2006 Designed for use in immersion tank with no heating required, D-Zolve 1012 strips hard-to-remove powder coatings and paints from intricate part shapes. Product is compatible with metals, ferrous and non- ferrous, as well as plastics. Stripping time typically ranges from 30 min or less to 2 hr. Designed to minimize health and environmental hazards, product is non-flammable, has no hazardous air pollution potential, and does not contain any carcinogenic compounds.

Cincinnati Lamb    Hebron, KY 41048
Jan 10, 2006 Multi-Tasking Machining Centers incorporate Balance Sensor software feature to detect imbalance conditions in rotary B-axis tables. Integrated within Siemens SINUMERIK® 840D control, Balance Sensor monitors Z-axis following error to rapidly sense table imbalance. If unbalance condition exists, calculations are made by Balance Assist program, which generates graphical display to identify location of imbalance and how much compensating weight is needed to correct problem.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
Jan 09, 2006 Utilizing 20 hp motor, Hard Drive Destruction System, Model 22 HDD(TM) shreds used computer hard drives into unreconstructible, irregularly shaped fragments. Up to 3½ in. standard drives can be destroyed safely at rate of 20/hr. Up to 10 drives can be preloaded for automatic feeding, and built-in conveyor adjusts feeding speed to prevent jamming. Rotary knife mill cuts waste until particles are small enough to pass through steel sizing screen.

Schleuniger, Inc.    Manchester, NH 03103
Jan 09, 2006 Featuring menu-guided programming, CoaxStrip 5500 utilizes 4-blade design to process thin, difficult-to-strip or out-of-round insulation types. It can strip coaxial, triaxial, and multiconductor cables as well as single conductor wires up to .590 in. OD at rates to 450 cables/hr. In addition to graphic display and programmable gripper force, product offers 3.35 in. max stripping length and memory storage capacity for up to 1,000 cables and 100 wire lists.

Schleuniger, Inc.    Manchester, NH 03103
Jan 09, 2006 Programmable CoaxStrip 5300 offers precise, repeatable stripping of micro-coaxial cables with inner conductors ranging from .003 in. or 42 AWG up to maximum cable diameter of .080 in. Maximum stripping length is 1.14 in., and cable clamping force is programmable. Unit includes graphical user interface and memory storage capacity of 1,000 programs.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Jan 09, 2006 Rotary table wheel-blast system, Model GWB-702L features two 10 hp direct-drive blast turbines that deliver 440 lb of media/min and rotate in opposite directions, so blast patterns overlap to completely cover components on machine's table. Measuring 70 in. in diameter, gear-driven turntable is armored with replaceable plates cast in abrasion-resistant alloy and offers capacity of 4,000 lb. Media reclamation is accomplished by 3-stage system.

Multiquip Inc.    Carson, CA 90746
Jan 05, 2006 Driven by 60 hp Deutz diesel engine, walk-behind Series PS is 34 in. wide without outer blade flanges attached. Stay Level Handles are adjustable and remain level regardless of saw's operating position, minimizing operator fatigue and risk of back injury. Clutchless bladeshaft disengaging system enables bladeshaft rotation to be stopped or started while engine is running. Saw also includes automatic parking brakes and vibration control mounting system.

Carver, Inc.    Wabash, IN 46992 0544
Jan 05, 2006 With no hydraulics, E-Series provides clean, quiet operation suited for compression molding rubber/elastomers, gum silicones, TPRs, thermosets, and plastics, as well as bonding and laminating applications. All electric power/drive system provides ramping of clamp force from 1,000 lb to 30 tons. Standard temperature range is to 650°F, and platen sizes range from 12 x 12 in. to 24 x 24 in. Functions can be programmed with microprocessor-based control.

Rex-Cut Products, Inc.    Fall River, MA 02720
Jan 05, 2006 Packaged in plastic storage box, Mounted Point Combi Kit includes resin bonded cotton fiber mounted points for deburring, latex bonded cotton fiber units for light deburring and polishing, and soft unitized synthetic fiber mounted points for high polishing. Each cotton fiber or unitized mounted point is impregnated with aluminum oxide or silicon carbide abrasive, which is bonded and compressed into shape and constantly reveals fresh abrasives.

Neopost    Hayward, CA 94544
Jan 04, 2006 Featuring automated folding and on-demand inserting for low volume mailing, SI 30 Desktop Folder Inserter operates with various print densities, paper colors, and thicknesses. Secure 'N Feed technology ensures double document mailing security and eliminates risk of information being sent to wrong addressees.

AltaMAR Laser & Control Inc.    Fridley, MN 55432
Jan 04, 2006 Designed for round tubing with diameters from 0.125-1.00 in., Model LT2000 cuts end profiles and internal features in one pass. Available with variety of laser sources, including CO2, YAG, and fiber, system is capable of cutting mild steel, stainless, aluminum, or non-metals of various sizes and wall thicknesses. Back-strike system prevents formation of debris on ID of tube. PC-based controller with touch-screen can generate programs with imported CAD geometry.

Lexair, Inc.    Lexington, KY 40511 1018
Jan 03, 2006 Front-mounted Full Bore® Chuck has mechanical grip, air-release design that makes full spindle bore available to handle hex, round, and square bar stock. Air is only used to open chuck, and spring force holds workpiece while being machined. Clamping force, adjustable by tightening or loosening collet using spanner holes, is constant regardless of spindle speed. Offered in 9 models with diameters from 6.75-14 in., product offers adjustable concentricity and dead-length positioning.