Behringer Saws, Inc.    Morgantown, PA 19543
Oct 25, 2006 HBP-510/923G Semi-Automatic Horizontal Miter Bandsaw features miter range of 105° (60° left, 45° right), with cutting capacity up to 35.4 x 19.6 in. for profiles and up to 20 in. for round materials. Frequency-controlled 7.4 hp drive motor has variable speed range from 65-460 sfm, and hydraulic hardened clamping jaws ensure steady cuts at all speeds. Weighing 6,280 lb and measuring 67 x 154 x 115 in., saw has cast iron frame for vibration-free operation.

Metabo Corp.    West Chester, PA 19380 4243
Oct 25, 2006 Supplied with ½ in. chuck, SBE 750 employs variospeed full-wave electronic speed control and has max tightening torque of 159 lb-in. This 6.2 A hammer drill incorporates goose neck depth gauge to promote accuracy. Capacities for concrete, mild steel, and softwood are ¾, ½, and 1½ in., respectively. With epoxy resin-coated field coil that helps prevent overheating under heavy loads, motor produces no-load speeds of 0-1,000 rpm or 0-3,000 rpm and 0-57,000 no-load blows per minute.

Esco Tool    Medfield, MA 02052
Oct 25, 2006 Prepzilla MILLHOG® features rigid blade lock system and T-15 tool steel cutter blade that transfers heat away from pipe surface to chip. Suited for prepping Super Duplex, stainless steel, and other hard pipe, it can sever 8 in. schedule 160 pipe within 10 min and then compound bevel and face it simultaneously. Tool has one mandrel and 8 sets of clamps for prepping pipe from 1.5 in. ID to 8.625 in. OD. It generates 1,500 lb-ft torque at cutting blade.

Hannay Reels, Inc.    Westerlo, NY 12193 0159
Oct 25, 2006 Narrow-frame, spring rewind N600 Series accommodates dual hoses for separate materials such as gases and liquids or air and coolant. Non-sparking ratchet assembly locks reel at desired length of hose payout, and pull on hose unlocks reel for spring motor to retract it. Declutching arbor is included to prevent damage from reverse winding. Compact mounting base, along with narrow frame, allows reel to fit in limited-space work environments.

Universal Instruments Corp.    Binghamton, NY 13902 0825
Oct 24, 2006 Supporting requirements of high-speed chip placement, 0201-capable 8 mm Gold dual-lane feeders offer PSV reel detection sensor that enhances traceability for absolute line control. Single lane Black 8 mm and 12 mm electric feeders, designed for medium to low-volume midrange applications, ensure traceability with unique feeder ID. All feeders are compatible with Lightning rotary-motion surface-mount component placement head.

REGO-FIX Tool Corp.    Indianapolis, IN 46268
Oct 24, 2006 Pre-balanced to G2.5 at 22,000 rpm, BT 30 ER 20 series Zero-Z short toolholders have clamping capacity of 0.5-13 mm. Symmetrical toolholder suits woodworking and high-speed machines requiring special taper and offer standard and ultra precision levels of protection.

RIDGID    Elyria, OH 44035
Oct 24, 2006 Available in 16 oz can that fits into tool box or threading kit, RIDGID® extreme performance aerosol threading oil provides users with up to 35 uses/can on 1 in. threads. Thick foam mix adheres to work piece, allowing for cool running and good quality. Suited for use in constricted area, product can be used on hand threading and hand power drive threading machines.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Oct 23, 2006 Available for CAT40, BT40, HSK-A63, and Capto C6 size spindles, EW2-50XL Series provides shorter tool than modular shank/boring head combination. Heads can be used with existing center-mounted boring bars from .078-2.125 in. dia and side-mounted insert holders from 3.15-6.00 in. dia. Units deliver precision finish boring with adjustment dial displaying increments of .0002 in./dial division and Vernier markings to accurately adjust to .00005 in. on diameter.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Oct 23, 2006 Speroni STP-34, STP-35, and Esperia tool presetter machines includes automatic mechanical clamping HSK spindles that apply tool clamping force of 440 lb to seat HSK tooling into presetter. Integral spindle design can accommodate tooling in dedicated sizes of HSK 25 to HSK 80, and spindles are completely field retrofittable to existing Speroni tool presetter machines.

CGW, Camel Grinding Wheels, USA    Niles, IL 60714
Oct 23, 2006 Quick Change Laminated Discs with roll-on attachment include non-woven types for stainless steel, aluminum oxide types for general-purpose work, zirconia types for accelerated cutting, and zirconia types with grinding aid for cool cutting. Depending on disc, diameters range from 1½-4 in. with grits from fine to coarse or 24-120. Quick Change Laminated Discs with turn-on attachment include 2-3 in. dia aluminum oxide and zirconia types in 24-120 and 24-80 grits, respectively.

Elsner Engineering Works, Inc.    Hanover, PA 17331
Oct 23, 2006 Model WCM-30 automatically converts up to 30 finished seasonal Christmas crackers and bonbons per minute for party goods marketplace. It accommodates varying widths and diameters of crackers as well as varying sizes of toys, jokes, and hats that are contained within cracker. Sequential operation provides industry-required staged production, while PLC ensures repeatability of product. Each machine can be customized based on user requirements.

Rigibore Tooling Systems    Mukwonago, WI 53149
Oct 20, 2006 Ultra-Fine Precision (UFP) cartridges can adjust cutting edge to 5 microns on diameter and maintain this tight tolerance with zero backlash, consistently, over extended periods of time. Suited for precision single and multipoint boring requirements, replaceable product provides flexible system that allows for modification and/or re-conditioning of existing bars. Its precision helps increase performance in aerospace, automotive, medical, and marine industries.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Oct 20, 2006 Equipped with 5.6 A, 30,000 rpm motor, Model D26670 features spindle lock design that speeds bit changes using one wrench, and ¼ in. collet that enables users to cut with round-over bits, laminate bits, and variety of decorative detail bits. Model D26670 accepts standard guide bushings for cutting mini dovetails, hinge butt, and strike and latch templates. Additional features include extra-large base locking knob and large, vertical power switch.

Behringer Saws, Inc.    Morgantown, PA 19543
Oct 20, 2006 Motorized Gripper Feed Unit for HBP-413A-3000 Automatic Bandsaw has transport speed adjustable up to 39.3 fpm forward and 98 fpm in reverse. Unit is designed with linear rail and linear bearings mounted on fixed vise jaw side of bandsaw, and hydraulic clamping of feed unit carriage provides maximum stability of material during cut. Saw and 3 m unit cut solids with up to 16 in. dia, rectangular shapes up to 19.7 x 15.7 in., and material up to 141.7 in. long.

Northfield Precision Instrument Corp.    Island Park, NY 11558
Oct 19, 2006 Modified for spring clamp/air open, Model 350 consists of 3 in. diameter, 3-jaw Air Chuck mounted to BT-30 tool holder. Chuck assembly mounts in standard BT-30 vertical machining center and is actuated via coolant through spindle passage. Standard VMC can be used as vertical lathe with pallet on one side for automatic load/unload of work pieces.

Northfield Precision Instrument Corp.    Island Park, NY 11558
Oct 19, 2006 Model DPH-300I standard 3 in. dia (1 micron TIR) 6-jaw diaphragm chuck is designed with internal rotary union that keeps air feed tube stationary. This eliminates vibration of standard rotating tube and allows chuck to operate at speeds up to 15,000 rpm. Chucks are tooled with special jaws and stops to hard turn small fuel injection components.

Dapra Corporation    Bloomfield, CT 06002
Oct 19, 2006 Designed for 90ºcutting, SSPM Series feature inserts with positive cutting geometry for smooth cutting action and fine pitch for aggressive metal removal. Offered in toughest, medium, and hardest carbide substrates, inserts are available from 2-6 in. diam. Applications include suit face milling, profiling, slotting, step milling, plunge roughing, and interpolation of cored holes.

Modern Industries, Inc. (mPower)    Erie, PA 16512
Oct 19, 2006 Incorporating principals of structural engineering, ModLoc(TM) Columns feature strong exterior structure with aluminum alloy or steel construction. Manifold and support brackets securely connect with fixture plates to form precise, integrated, rigid structure. SpeedLoc locator/fastener system allows endless configuration of columns, while open design permits hydraulic and electrical access to multitude of tooling and fixturing components.

Carr Lane Manufacturing Co.    St. Louis, MO 63119
Oct 18, 2006 Zero Point Mounting Kits contain all required components to create quick pallet change system for CNC machinery. Speedy Module plates, mounted onto machine table or tooling block, clamp onto nipples attached to bottom of existing fixture plates. Attaching nipples to all fixtures lets users change pallets in seconds. Module plates can also be mounted to inspection machines, making it possible to transfer parts from machining to inspection while maintaining same data points.

DE-STA-CO Industries    Madison Heights, MI 48071
Oct 18, 2006 Featuring DIRECTCONNECT(TM) technology, DPW Series can be mounted directly to other modular automation products without adapter plates. Wide body design provides secure gripping of large and wide parts. Jaws are supported throughout length of gripper body, making series suited for long finger applications. Offered in 3 sizes with 2 strokes per size, grippers can be mounted and operated in any orientation.