Machinery & Machining Tools

Agricultural and Farming Products, Machinery & Machining Tools, Transportation Industry Products

Agri-Trade Equipment Expo, Red Deer (Alberta) - Kubota Presents its Newest Products to Western Canada's Farmers

Nov 14, 2016

RED DEER, AB, Nov. 9, 2016 - From November 9 to 12, Kubota Canada Ltd. (KCL) will take part in the 2016 edition of the Agri-Trade Equipment Expo in Red Deer (Alberta), an exceptional event where visitors will have the opportunity to discover Kubota's new 2016 product line and appreciate their legendary power, durability and reliability. Product specialists available on-site will help... Read More

Architectural and Civil Engineering Products, Machinery & Machining Tools, Plant Furnishings & Accessories

RSX Fire Door Operator with 24-hour battery backup.

Nov 14, 2016

Ideally suited for commercial purposes, RSX Fire Door Operator has ability to release door completely. Having 24-hour battery backup, unit doesnot require any manual intervention. After fire alarm signal and test key switch, motor can still be operated normally once reset. Product can be used with Overhead Door FireKing  series.

Read More

Machinery & Machining Tools

Walter Surface Technologies Announces New Innovations for Fabtech 2016 in Las Vegas - Booth N2704

Nov 14, 2016

Montreal QC / Windsor, CT November 10th, 2016 – Walter Surface Technologies, the global industry leader in surface treatment technologies, is pleased to announce that it will once again be exhibiting at the FABTECH Expo at the Las Vegas Convention Center in Las Vegas, Nevada, from November 16-18, 2016. Companies looking to improve quality and increase productivity in the workplace are... Read More

Machinery & Machining Tools

DoveLock Dovetail Vises offers anti-deflection control.

Nov 13, 2016

Made from pre-hardened 4140 steel, DoveLock Vises allow access to 5 sides of the workpiece in 5-axis, 4th-axis and palletized CNC machining systems. Vises are available in 1-inch and 2-inch jaw width with superior clamping strength. Having unique reversible jaws of 0.33” to 1.65” for wider clamping area, user can apply maximum dovetail strip as needed by configurations. Features sturdy... Read More

Machinery & Machining Tools, Portable Tools

TaskMaster® 3-in-1 Tool with 360° punch head.

Nov 13, 2016

Ability to cut, crimp and punch with this single tool, TaskMaster® 3-in-1 is battery powered. Rotating the punch head 360° on two axes to punch ½” to 4” holes in steel makes it useful even for space restrained applications.

Read More

Machinery & Machining Tools

Cartridge Mandrel Clamping Device with manual quick-change system.

Nov 13, 2016

Providing consistent and rigid workpiece ID clamping, Cartridge Mandrel Clamping Device works with diameters of 10 mm allowing concentricity tolerances within 0.01 mm. Used for grinding, turning, milling, drilling and measuring. Device can also be used with 269-90 and 267-20 types of intermediate flanges. Device is built sturdily with hardened clamping segments and guides. While manual... Read More

Labels Tags Signage & Equipment, Machinery & Machining Tools

Amada Miyachi America to Showcase Industry-Leading Laser and Resistance Welding and Processing Technology at FABTECH 2016

Nov 13, 2016

Visit Amada Miyachi in booth C29037

MONROVIA, CA – Amada Miyachi America Inc., a leading manufacturer of welding, marking, cutting, sealing, and bonding technology, will be highlighting its popular LMWS (Laser Marking Workstation) in booth C29037 at FABTECH 2016, which takes place November 16-18, 2016, at the Las Vegas Convention Center, in Las Vegas, NV. The LMWS will be shown with... Read More

Machinery & Machining Tools, Mechanical Power Transmission, Services

4X Models GSC510 and GSC110 for select Citizen Swiss machines.

Nov 13, 2016

Offering PCM Swiss made 4X high speed spindles, GSC510 and GSC110 from GenSwiss, provides better performance of micro drills, end mills and high speed thread milling tooling. Using planetary style gear system with low profile configuration, 4X models can be installed in Citizen A, L, M and L32 series machines. Product has good surface finishing with unique design to seal out oil and high... Read More

Machinery & Machining Tools

CNC Routers Provide Sign Shops the Capability for Full-Service Sign Production

Nov 13, 2016

The HD CNC Router is available in 4 x 4, 4 x 8 and 5 x 10 standard sizes, and features a 4 HP HSD high frequency collet spindle, automatic tool calibration, 4-zone vacuum T-slot table, and easy-to-use hand-held controller. The HD machine is open architecture compatible with all industry standard signmaking graphic software.

A successful full service sign company had this to say: ?Our HD... Read More

Machinery & Machining Tools, Mining, Oil Drilling, Refining Products & Equipment

Diamond Drilling Commences on the Coneto Gold-Silver Project in Durango, Mexico

Nov 13, 2016

VANCOUVER, Nov. 8, 2016 - Orex Minerals Inc. – (TSX-V: REX – OTCQX: ORMNF) ("Orex"), is pleased to announce that project partner Fresnillo PLC (LSE: FRES – BMV: FRES) ("Fresnillo"), has commenced a Phase-V diamond drilling program of approximately 5,000 metres in 11 holes on the Coneto Gold-Silver Project in Durango, Mexico.

The Coneto Project is a joint venture, with ownership of... Read More

Machinery & Machining Tools, Mechanical Power Transmission

Red Heat R983 Abrasive Belts and Discs contain no performance-inhibiting dies.

Nov 13, 2016

Wear resistant, Norton Red Heat R983 suite of products comes with enhanced grain/bond adhesion. Designed for grinding and polishing metals, R983 Flap Discs are available in three shapes and in sizes ranging from 4" x 5/8" up to 7" x 7/8". R983 Discs are available in TS (Type II) and TR (Type II) in sizes ranging from 1-1/2" to 3". R983 Belts come in lengths ranging from 11" to 700," stand... Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools

Clean Ream Plus Plastic Pipe Fitting Reamer guarantees 250 or more reams.

Nov 12, 2016

Available in 1 ½” and 2” size fittings, Clean Ream Plus Plastic Pipe Fitting Reamers provide less downtime. Engineered to deliver 250 or more reams, units provide quick and easy removal of pipe and solvent cement residue to salvage fittings for reuse. Saving time and material, product eliminates the need of replacing entire sections of pipe.

Read More

Machinery & Machining Tools, Mechanical Power Transmission

ETube and Wire Add the TruBend C60 6 Axis CNC 67 Ton Press Brake

Nov 11, 2016

The TruBend Series 3000 brings together the best TRUMPF quality with simple operation and an attractive price-performance ratio

• Cost-efficiency, even when operated at low capacity

• High part accuracy

• High productivity

• Simple operation, well thought-through control

About Etube and Wire Read More

Machinery & Machining Tools, Thermal & Heating Equipment

Ice Slicer Road Salt De-Icer Inventory in Northeast Denver Area

Nov 11, 2016

Select Materials LLC, a bulk landscaping materials firm, has announced today that it will begin stockpiling Ice Slicer for the 2016 winter driving season

FORT LUPTON, Colo., Nov. 5, 2016 - Select Materials LLC, a bulk landscaping materials firm, has announced today that it will begin stockpiling Ice Slicer for the 2016 winter driving season. Ice Slicer is a fast melt acting de-icing... Read More

Machinery & Machining Tools

Customized Chuck to the Rescue!

Nov 10, 2016

Island Park, NY... Northfield Precision Instrument Corporation is a leader in the design and manufacture of precision workholding chucks. When a good customer required a chuck to hold parts to be mounted to a Studer Grinder for contour grinding into special cutting tools, they turned to Northfield for help. Northfield’s engineers customized their Model 650 chuck to use only one jaw for... Read More

Machinery & Machining Tools, Mechanical Components and Assemblies

Niagara Cutter Stabilizer 2.0 comes with advanced AlTiN coating.

Nov 10, 2016

Offering smooth and silent operation, Niagara Cutter Stabilizer 2.0 is capable of handling twice the chip load capacity than previous models. Including ST440.2 HT series for ISO-M and ISO-S materials such as stainless steel, titanium and high-temp alloys and ST430.2 series are designed for steels, alloy steels, cast iron. Boasting of new geometry to boost performance, end mills are offered in... Read More

Machinery & Machining Tools

Tiger® Angled Flap Discs come with self-sharpening zirconium flap disc.

Nov 10, 2016

Available in 7/8-inch arbor or 5/8-inch -11 nut for fast change-over, Tiger Angled Flap Discs features 90° angled flap design which allows operator to grind at higher or lower angle. Featured with phenolic blocking, units reduce the risk of gouging of workpiece while grinding fillet welds for smoother finish. Suitable for grinding steel, stainless steel, aluminum and other hard-to-grind... Read More

Machinery & Machining Tools

Imperial Systems Inc Partners with AKS Cutting Systems

Nov 09, 2016

The investment in a quality cutting table can now be protected by a dust and fume collector custom-designed to meet the needs of advanced cutting machines

JACKSON CENTER, Pa., Nov. 4, 2016 - For most businesses, a plasma or laser cutting table is a huge investment. It requires research and planning to choose the right one. With all the consideration that goes into choosing a cutting... Read More

Machinery & Machining Tools

Solid-carbide End Mills with Smaller Neck Diameters Increase Application Range

Nov 09, 2016

TROY, Mich., November 3, 201 6 - The Jabro ® -Solid2 JS554 range of solid-carbide end mills gains further utility and versatility with smaller neck diameter options. These latest tools provide greater clearance when machining complex components, such as those found in aerospace, medical and general machining applications.

Smaller neck dimensions make it easier to access parts clamped... Read More

Machinery & Machining Tools

Tiger UltraCut Cutting Wheels comes with self-sharpening zirconia alumina grain.

Nov 09, 2016

Available in both zirconia alumina grain and INOX, Tiger UltraCut 1 mm Cutting Wheels come in diameters of 4 1/2 and 5 in. UltraCut 1 mm delivers clean, precise cuts with smaller seams on thin sheet metal, tubes and small diameter rods. Weiler SOLID CORE technology helps in increasing wheel life and stability, maximize cuts per wheel, reduce changeover time, and minimize costs. INOX wheels are... Read More