Foundry Networks, Inc.    San Jose, CA 95164-9100
May 05, 2008 Featuring non-blocking architecture, FastIron® Edge XE Series supports 512,000 IPv4 and 64,000 IPv6 routes from 1.5 rack unit form factor. There are 3 models available, including fiber and copper configurations with 24-48 ports, to address needs of organizations and service providers who have edge and aggregation routing demands nearing capacity limits of their current infrastructure. All models are upgradeable with 2-port 10GbE module.

Juniper Networks, Inc.    Sunnyvale, CA 94089
May 05, 2008 Leveraging JUNOS single-source operating system, JCS 1200 provides independent scale of control and forwarding plane resources, enabling service providers to accelerate roll out of high-value services while minimizing operating expenditures. Twelve-rack unit provides 12 Routing Engine slots and connects to T-Series routers via redundant Ethernet connections. Enabling service-specific virtualization, JCS 1200 can optimize network efficiency by consolidating equipment.

Linksys    Irvine, CA 92614-5723
May 05, 2008 WRTU54G Linksys by Cisco Wireless-G Router brings Unlicensed Mobile Access (UMA) to support operator deployment of fixed and mobile services over common infrastructure. Device includes 2 phone jacks, 2 internal SIM card slots for multiple phone lines, and UMA client software. Additional features include unscheduled automatic power save delivery and simplified pairing of handset to access point. Unit also enables analog phone traffic to be carried over IP back to operator's network.

Atlas Vac Machine Div., Planet Products Corp.    Cincinnati, OH 45242
May 02, 2008 Model 18:30S can provide over 10,000 lbf on large format (18 x 30 in.), Silverstone-coated sealing platen. In addition to PLC for temperature, dwell time, and pressure management, sealer includes standard secondary IR thermal sensing that provides packaging engineers with platen temperature information needed during validation. Optional Direct Force Sensing System provides reading of force (lbf) exerted by tray sealer press against seal tooling on every stroke.

Beckwood Press Co.    Saint Louis, MO 63026 2405
May 02, 2008 Hydraulic Tank Head Forming Press is equipped with independently controlled clamp and draw rams. It features bed cushion that can be engineered for standard or dynamic cushion control per user's requirements. Dynamic cushion control includes independent travel zones, utilizing recipe function on PLC interface. System can be customized for wide range of specifications including tonnage, bed size, speed, and stroke.

ESS Technologies, Inc.    Blacksburg, VA 24060
May 02, 2008 Custom-made, end-to-end solution assembles diagnostic test kits, visually inspects them, and loads completed test kits into trays at rates to 45 test kits/min. Solution integrates material handling, product feeding, and packaging equipment as well as automated pick and place modules, multi-axis FANUC robots, vision, and inspection tools. Complete system integrates bowl feeders with low-profile flat belt conveyors, puck carrier, automated reel feeders, and cutters.

Reishauer Corp.    Elgin, IL 60123 1205
May 02, 2008 RZ 303C Precision Gear Grinding Machine includes gearless planetary drives, acoustic sensing for alignment of dressing diamonds, and LNS low noise shifting. Main column carries grinding spindle, and slide rotates 180º in total - it rotates 90º to facilitate wheel change and another 90º to perform wheel dressing operations. Onboard loading system transports unground parts into high-production Gear Grinder. Parts can be organized in stacks of steel or plastic baskets.

Reishauer Corp.    Elgin, IL 60123 1205
May 02, 2008 Model RZ 1000 features gearless planetary drive and workspindle with deviation of less than 0.3 arc-sec peak to peak. C1 axis that houses grinding spindle and all of its related axes rotates 180° to allow wheel change and manual or automatic loading of workspindle. Base is constructed of stainless steel, while tailstock, workspindle assembly, and tool holding axes are made of cast iron. Controlled by HMI software, 12-axis machine also includes touch trigger probe.

Netgear Inc.    Santa Clara, CA 96054
May 01, 2008 ProSafe 802.11n Dual Band Wireless Access Point (WNDAP330) supports devices based on 5 GHz 802.11a/n or 2.4 GHz 802.11b/g/n technologies. SNMP-manageable solution secures wireless network and incorporates 802.3af PoE support. Suited for point-to-point and point-to-multipoint bridging with Wireless Distribution System, product incorporates 10/100/1000 Gigabit Ethernet port with Auto Uplink(TM), console port for local configuration and monitoring, and 3 detachable antennas.

Dynabrade, Inc.    Clarence, NY 14031
May 01, 2008 When used with shop lathe, Superfinisher achieves consistent finish on variety of materials including tungsten carbide, chilled iron, stainless steel, chrome plating, brass, and copper. Air pressure regulator ensures uniform contact force between workpiece and roller, while oscillation drive with counter balance provides smooth operation. Using abrasive rolls from 1-4 in. wide, Superfinisher constantly advances rolls at speeds from 1/16 to 1½ ipm.

Agie Charmilles, LLC    Lincolnshire, IL 60069
Apr 30, 2008 Constructed with cast iron C-frame and cross-table design, FORM 20/30 is built for stiffness and can withstand temperature fluctuations of workshop environments. It has integrated tool capacity for 4-6 positions, and continuously measuring glass scales on all axes promote positioning and cutting accuracy. Solution can be integrated into data network via LAN and incorporates Advanced Power Generator, rated 72/103 A, that delivers consistent surface finish quality.

Foundry Networks, Inc.    San Jose, CA 95164-9100
Apr 30, 2008 Designed for organizations requiring scalable and secure intelligent edge solution, FastIron® GS-STK and FastIron LS-STK 10 GbE access switch series support Layer 2 Ethernet services, static routing, and IGMP and MLD multicast snooping. They are powered by IronWare OS, which supports Base Layer 3 features for networking and configuration flexibility, and offer security capabilities via IronShield(TM). FastIron GS-STK series can be upgraded to support Power over Ethernet.

Agito Networks    Sunnyvale, CA 94089
Apr 30, 2008 Offering business-class eFMC functionality, RoamAnywhere natively integrates with Cisco Systems' Unified Wireless Network family and supports identity-based mobility through integration with Microsoft Active Directory and LDAP. Router scales from 10-1,000 simultaneous users, and features non-blocking architecture that separates control traffic from data/voice traffic. At network layer, device delivers sub-100 ms automatic location-aware handover between WiFi and cellular networks.

ACE Production Technologies    Spokane Valley, WA 99216
Apr 29, 2008 LTS200 Lead Tinning System is programmable, automated machine that safely reconditions component leads for Hi-Rel and/or, RoHS applications. It features central fluxing station with 2 solder pots, one mounted on either side of fluxer, and pallet holder that accepts variety of component-specific pallets. Machine can be programmed to handle all leaded parts and operator can create and add routines as well as specify and control withdrawal rate from final solder bath.

Rush Machinery, Inc.    Rushville, NY 14544
Apr 29, 2008 Intended for carbide tool and carbide rod manufacturing industries, Auto-Cut CNC Carbide Rod Cut-Off Machine automatically loads and cuts .055 to 1 9/16 in. diameter rods, up to 16 in. long, from large capacity magazine. It comes with CNC controls with touch screen operator interface, which enables users to set rod diameter and length parameters, as well as flood coolant system.

Maxpro Technologies    Fairview, PA 16415
Apr 29, 2008 Offered in versions specified for working with medium-pressure tubing, high-pressure tubing, and both, Coning and Threading Tool Kit contains manual coning and threading tools designed to thread up to 9/16 in. OD tubing. One size coning and threading tool, with interchangeable bushings and thread dies, eliminates need for multiple tool inventories. Also included, coning blades cut both angle and straight areas of tube to ensure concentricity between sealing surfaces.

Graco Inc.    Minneapolis, MN 55440
Apr 29, 2008 Reactor IP, designed for rigid and flexible in-plant polyurethane foam processing, features local control module that allows up to 25 programmable shot settings and 5 shot sequences. Available in Reactor IPH-25 or IPH-40 hydraulic models with flow rates of 25 or 50 lb/minute, precision dispenser is suited for insulation of coolers/containers, pre-formed foam block for housing, solar panels, wall/floor panels, and pipe insulation.

Hermle Machine Company    Franklin, WI 53132
Apr 28, 2008 B 300 machining center incorporates gantry design, trunion table mounted on bearings, and mineral casting base with low thermal conductivity and vibration dampening properties. X, Y, and Z axes are 800-600-500 mm, respectively, with traverse of 30 m/min in all axes. Main drive, capable of up to 19 kW, powers 15,000 rpm spindle. Three-axis version has 1,000 x 560 mm, 1,500 kg capacity clamping table, while 5-axis model has 280 mm, 250 kg capacity NC-controlled swiveling rotary table.

TRUMPF Power Tools    Farmington, CT 06032
Apr 28, 2008 Nibbler N500-8 operates in reverse and in 4 directions, enabling users to move tool horizontally toward them or vertically from top to bottom. Weighing less than 9 lb, it features 1,400 W motor and operates in tight spaces. Device can cut through sheet metal up to 0.197 in. thick and SS 0.125 inches thick with working speed of 4.9 fpm. It can also cut through workpieces with 90° bends and double sheeting, such as tanks, containers, and guard rails.

CGW, Camel Grinding Wheels, USA    Niles, IL 60714
Apr 28, 2008 Super Quickie-Cut depressed center cutting/notching and pipeline wheels are available in 4½ in. dia with 1/8 in. thickness with 7/8 in. or 5/8-11 arbor holes. Made from aluminum oxide grain and R-grade bond for clean cutting action, cutting and notching wheels suit steel and cast iron. Designed for working on ferrous metal, depressed center pipeline wheels are made from aluminum oxide grain and T-grade bond for high stock removal.