Parlec, Inc.    Fairport, NY 14450 0059
Oct 01, 2008 Series 1800 TMM® is equipped with ParleVision PSC high-precision video measuring technology and over 15 measuring, presetting, and qualifying routines, all of which can be executed with the push of a button. Other features include precision roller-bearing spindle with vacuum clamping; LED ring light for clear tool surface inspection; dual-axis fine adjust system; storage for up to 500 tool assemblies and 99 calibrations or offset coordinates; and touch screen monitor.

Beta Max Hoists, Inc.    Melbourne, FL 32902
Sep 29, 2008 Maxial Track Hoist utilizes kwik bolts to secure track sections together along with clamps to anchor track to buildings or scaffolding. Aluminum track weighs 3 lb/ft and is available in dimensions of 3 ft 3 in., 6 ft 6 in. and 9 ft 9 in. Payload capacity is 450 lb. Hoist comes with upper and lower limit switches, electromagnetic disc brake, and universal carriage locking device in event of cable breakage. Hoisting unit incorporates LED light to inform operator of motor status.

Weidmuller, Inc.    Richmond, VA 23236
Sep 29, 2008 Supporting WLAN (IEEE 802.11 b/g), WaveLine WLAN-BRIDGE-WAVE enables serial terminal devices to be integrated in existing Industrial Ethernet network structures while also allowing users to connect or extend their network. It features non-isolated RS232 interface as well as 10 Base-T/100 Base-TX (copper) network interface and comes in IP20-rated, 108 x 22.5 x 127.8 mm plastic housing. Web server and range of security mechanisms are also included.

Eastman Kodak Co.    Rochester, NY 14650
Sep 29, 2008 For long continuous operation, MAGNUS VLF QUANTUM Platesetter is available with KODAK Automatic Pallet Loader, which loads up to 3,600 plates without manual handling. SQUARESPOT Thermal Imaging Technology minimizes impact of routine prepress variations and delivers plates that stay within tight print manufacturing tolerances. Continuous Load functionality allows 3 plates to be loaded, imaged, and unloaded simultaneously, while dual plate capabilities enable imaging of 2 plates at same time.

Ideal Industries, Inc.    Sycamore, IL 60178
Sep 26, 2008 Constructed of hardened steel and protected by titanium nitride coating, IDEAL bits produce exact, repetitive holes through brass, plastic, carbon steel, cast iron, stainless steel, and wood. Split Point tip hastens initial penetration, reducing resistance and extending bit life, while double-fluted design yields balanced cutting. Bits are offered with up to 16 multi-diameter steps from 1/8-1 3/8 in. and self-starting point that eliminates starter holes or punches.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Sep 24, 2008 Powered via 12 V Max Litheon(TM) battery system, PS50 Multi-X(TM) uses modular accessories to achieve multifunctional operation with tool change times down to 60 sec. Included adaptor enables use of Dremel, Fein, or Proxxon accessories. Weighing 2.2 lb, multi-purpose oscillating tool features 240° adjustable tool holder; variable speed dial (5,000-20,000 rpm); and ergonomically designed chassis that has soft grip surface with 6.88 in. circumference for optimal maneuverability.

Yasda Precision America Corporation    Elk Grove Village, IL 60007
Sep 24, 2008 Featuring linear motor drives and hydrostatic guide ways for all axes, YMC325 Micro Center operates with optimal stiffness and straightness. Non-physical contact drives and guide ways, as well as high servo response drive, eliminate friction for long-term operation. While thermal distortion stabilizing system reduces thermal distortion, gas pressure balancer improves z-axis motion accuracy and stabilizes balancing. Included vision system has 600x magnification lens and CCD camera.

SKF USA, Inc.    Lansdale, PA 19446
Sep 23, 2008 Available in 4 standard models, SKF® Mech-Tronix Spindle Systems incorporate spindle, pre-programmed variable speed AC drive, and spindle cooling chiller/circulator. Speeds up to 11,800 rpm and 20 hp at maximum rpm can be achieved, depending on model. Motor choices include totally enclosed liquid-cooled units and totally enclosed non-ventilated types. Embedded thermistor motor protection senses overheating conditions before serious damage occurs.

Manncorp    Willow Grove, PA 19090
Sep 23, 2008 Measuring 50 x 30 in., lead-free Model C250 is equipped with adjustable corrosion-resistant finger conveyor, automatic defluxing, IR preheating, air-knife cooling, and low-volume solder pot. Machine is available in either single or dual wave configurations for through-hole and surface mount assemblies. It also includes built-in solder pot loading, maintenance platform with locking support mechanism, and dial-adjustable wave height control.

Foamlinx    Sunnyvale, CA 94089
Sep 22, 2008 Designed for continuous operations, FCH Series includes 4 x 4 x 8 and 8 x 4 x 8 CNC 4-axis machines supplied with computer, flat screen monitor, and software pre-installed. Accuracy is 0.01 in. with 200 ft cutting wire and 26-30 ipm cutting speed. Capable of tapered cuts, machines are provided with over 200 shapes ready-to-cut in PDF format.

RIDGID    Elyria, OH 44035
Sep 22, 2008 Equipped with ratcheting mechanism, Model RC-2375 minimizes amount of force needed to cut through plastic pipe and tubing. Aluminum construction and ergonomic handles provide comfortable grip for cutting PVC and CPVC, PEX, polyethylene, polybutylene, and rubber hose. With X-CEL(TM) quick-change technology, blade can be changed without tools and lasts up to 2,000 cuts. Ergonomic grips built into bottom handle are spaced at ½ in. increments to provide pipe measuring scale.

Kimball-Midwest    Columbus, OH 43228
Sep 22, 2008 Engineered to drill thought high tensile materials, Cryo-Maxx Drills feature 137° self-centering split point that eliminates need for center punching and also prevents drill from walking or wandering while in operation. Cryogenically treated drill bits provide long life and handle tough maintenance and repair operations.

ACT'L sa    Braine l'Alleud 1420  Belgium
Sep 19, 2008 Modules eWON 2005CD and eWON 4005CD provide transparent Siemens communication between SIMATIC Step 7® on PC and network of S7-300 or S7-400 PLCs, either in MPI or Profibus. With Factory LAN to Machine LAN routing, modules offer WAN Ethernet port for connecting to Internet passing outward through local IT network and firewall. Use of Talk2M grants remote authenticated users access in fully bi-directional VPN link from their PC to any eWON device connected to Internet.

Stedman    Aurora, IN 47001
Sep 17, 2008 Type A Hammer Mills are up-running and feature 2-stage reduction principle for dual mechanical reduction, utilizing revolving hammers to shatter materials upon entry and then further disintegrating them against breaker plates. Both down-running units, Type B Heavy-Duty mills use reversible hammers and saw-tooth breaker plate while Type BX Medium-Duty includes feed opening supporting medium hard, lumpy, or bulky materials. All are available for various size reduction applications.

Modern Process Equipment, Inc.    Chicago, IL 60623
Sep 17, 2008 Intended for ultra-high purity grinding applications, Model 1052 Gran-U-Lizer(TM) can grind hard, abrasive materials, such as polysilicon, silicon, and cadmium telluride to various sizes with little to no foreign material contamination. It delivers high particle uniformity with minimal fines and adjusts to achieve median sizes from 120-500 µm.

Metabo Corp.    West Chester, PA 19380 4243
Sep 17, 2008 Suited for finishing welded seams, rough grinding for weld preparation, and sanding/cutting applications, Model W8-125 is 5 in. angle grinder that features 8.0 A motor with 800 W of power, 19.5 lb-in. of torque, and no-load speed of 10,000 rpm. Secure racket grip and dual grip zones ensure ergonomic handling, while anti-vibration side handle absorbs up to 60% of vibration. Unit offers safety features including tool-less guard adjustment, spindle lock, and safety slip clutch.

Kulicke & Soffa Industries, Inc.    Willow Grove, PA 19090
Sep 17, 2008 UniPlus blades are optimized for cut quality, blade life longevity, and productivity in various chip scale package (CSP) applications. Each blade is designed for specific package singulation application, including ceramic, BGA substrates, and QFN leadframes. Hard nickel bond permits optimized feed rates, and flexibility lets users tailor approach based on individual process and project requirements.

Conicity Technologies, LLC    Cresco, PA 18326-0149
Sep 16, 2008 Able to output 150 tools/hr, DXM-50-EZ incorporates CNC technology and eliminates variability/inconsistency in off-hand processing for drill diameters from 1/8-1 in. Edge prep sizes range from 0.0005-0.0025 in. and can be controlled to tolerance of 0.0002 in. To optimize drill performance and consistency, all defects and grind lines present on cutting edge are removed. By strengthening interface between tool and workpiece, variations in tool performance are eliminated.

Fasnap Corp.    Elkhart, IN 46515
Sep 16, 2008 Available as portable press that can also be bench mounted, Model 3P5 pneumatic grommet press is capable of punching holes in variety of industrial fabrics and setting plain or rolled rim grommets up to size #4, all in single stroke. It is also available in heavy-duty version, Model 3P5-X, for oversized grommets.

Hitachi Power Tools    Norcross, GA 30093
Sep 16, 2008 Powered by 9.5 A motors and featuring no-load speed of 5,500 rpm, Models C8FSE and C8FSHE slide compound miter saws weigh 31 and 32 lb, respectively. With bevel range of 48° to left and 5° to right for precise compound cuts, they feature thumb-actuated positive stops to adjust miter angles of 15, 22.5, 31.6, and 45° to both left and right. Portable units can handle materials up to 2 9/16 in. high, such as crown molding lying flat and 12 in. deep in 90° cross cut.