Rex-Cut Products, Inc.    Fall River, MA 02720
Jan 26, 2009 Megabrite(TM) Non-Woven Abrasives include unitized Type 1, convolute, and Type 27 wheels, mounted points and their finishing flap discs. They are manufactured by compressing non-woven synthetic fiber material with resin and abrasive grains. Open structured products are offered in soft to hard densities (2-9) and coarse to very fine grit. Flap discs blend and finish weld in one operation, and mounted points come in variety of A, B, and W industry standard shapes and sizes.

Metabo Corp.    West Chester, PA 19380 4243
Jan 26, 2009 Weighing just 6.3 lb, WE14-150 Quick 6 in. suits heavy duty cutting and grinding applications in metal working and mechanical maintenance industries. It offers 1,400 W of power, 31 in.-lb of torque and no-load speed of 9,000 rpm. It comes with wheel guard, inner flange, and flange kit for mounting both type 1 and type 27 wheels. Other features included are encapsulated on/off switch, double-lipped labyrinth sealed bearings, and dust-deflecting winding protection grid.

Columbia Marking Tools, Inc.    Chesterfield, MI 48047
Jan 23, 2009 SuperDuty 20-20SD simultaneously imprints continuous identification information on square, hexagonal, or round bar stock, eliminating need for secondary marking operations. Suited for manufacturers with variations in part size and material type, heavy-duty machine can mark bars up to 300 lb and 3-20 ft long without adverse effects to spindle bearings and shafts. Featuring 2 independent marking pressure rams, machine offers setup and changeover times of 2 min.

Sunnen Products Co.    St. Louis, MO 63143
Jan 23, 2009 Designed for bore diameters up to 12 in. or larger, all-electric Model SV-560 features 20 hp spindle, 0-300 rpm standard spindle speed, and max stroke rate of 90 fpm. Vertical CNC honing machine offers automatic geometry correction, auto-dwell for bore straightness, and synchronized servo axes that eliminate flattening of crosshatch angle. Measuring 87 x 81 x 89.5 in., system is suited for machining oil and gas industry components, such as gas compressors, liner hangers, and telemetry units.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Jan 23, 2009 Providing face cutting with small depths of cut in steel and stainless steel, CoroMill 345 suits applications ranging from small-batch, mixed machining to high-volume dedicated production lines. It is equipped with double-sided inserts that provide 4 edges on each side, and offers full cutting edge backing and insert-seat stability through shims with strategic support islands that match insert rake-faces. CoroMill 345 is offered in 2.00-10.00 in. dia.

RathGibson    Janesville, WI 53547-0389
Jan 22, 2009 Suited for offshore and onshore applications, Dual Pneumatic Spooling Unit enables users to run 2 different fluids at different pressures simultaneously with complete control and safety. Pneumatic mechanism uses air which is then exhausted into atmosphere for environmentally friendly operation. System accommodates control lines of various sizes, as well as spools of various weights.

Schleuniger, Inc.    Manchester, NH 03103
Jan 22, 2009 CrimpCenter machines are available with EASY ProductionServer software, which can automatically sort and allocate orders to minimize changeovers and reduce production expense. From central PC, production orders can be sent via network to one or more fully automatic crimping machines. Order sequence and allocation is optimized to minimize machine downtime. Software also recognizes current machine configuration and maintains possibility for manual interaction.

Rush Machinery, Inc.    Rushville, NY 14544
Jan 22, 2009 Designed for processing flats, angles, and radii on diamond/CBN single wheels and multiple wheel packs, Models FC-250EX and FC-700EX Automatic Diamond and CBN Wheel Truing and Dressing Machines feature PLC-controlled, automatic dressing cycles with servo-driven dressing wheel infeed, power swing, and oscillation. With wheel diameters up to 28 in., other features include ExVision, a computer-driven vision system with software program; an automatic power zoom; and a 2-axis DRO for measurement.

Dynabrade, Inc.    Clarence, NY 14031
Jan 22, 2009 Featuring grinding head that pivots 360° to facilitate use in heard-to-reach areas, air-powered Dynafile II employs 20,000 rpm, direct-drive air motor that powers abrasive belts ¼-¾ x 18 in. long. Air motor can be converted to die grinder by adding ¼ in. collet or to air drill by adding chuck. Along with interchangeable contact arms, features include trouble-free belt tracking, thermal-insulated housing, and ergonomically designed motor handle with 7° pitch.

Kennametal Inc., Advanced Materials Div.    Latrobe, PA 15650-0231
Jan 21, 2009 Mill 1-10(TM) performs all common machining applications, such as face milling, shoulder milling, pocketing, slotting, interpolating, and ramping for steels, aluminum, or exotics, all with one common insert style. Multifunctional cutter bodies come in straight flute and helical flute styles; end mills are offered with cylindrical shanks in 3 lengths, Weldon shanks, or as a screw-on style head. Inserts, offered with 6 geometries, feature super positive cutting rake and integrated wiper facet.

Northfield Precision Instrument Corp.    Island Park, NY 11558
Jan 21, 2009 Measuring 5 in. in diameter, Diaphragm Chuck features 1-piece hardened and ground morse taper No. 5 adapter and female morse taper No. 3 in chuck face for stops and other tooling. Unit includes internal hammer to eject morse taper tooling and changeable inserts that repeat to 50 millionths T.I.R. Chuck is suited for high-speed extreme close tolerance grinding and turning.

Ishida Europe Ltd    Birmingham   United Kingdom
Jan 21, 2009 Operating at speeds of up to 150 trays/min, IPS packs trays into cases and Eurocrates. It works by moving individual trays rather than collations, and optically tracks each tray during operation, while trays are picked and crates filled while in motion. Machine is finished to IP65 standard, is set up and operated via it's touch screen, and can also be operated and monitored remotely. Offering flexibility in terms of case layout, unit can be specified in single and twin lane formats.

Advanced Machine & Engineering Co.    Rockford, IL 61103
Jan 20, 2009 Operating with minimized environmental impact, AMSAW® R300R integrates rail hole drilling station for bolted joints at rail ends as well as carbide cutting blades, which accept 5 retips and up to 40 resharpenings before replacement. It includes onboard PLC, preloaded ballscrews, and 3 vertical and 2 horizontal hydraulic clamps enabling 90º cut on rail ends. Saw blade guide and dampening device maximize accuracy and electronic overload device stops saw feed if necessary.

Slater Tools, Inc.    Clinton Township, MI 48038 1554
Jan 19, 2009 Available with 5/8 and ¾ in. as well as 16 and 22 mm shanks, 0700 series Swiss Type Adjustment Free Rotary Broaching Tool Holders are used for producing hexagon and square holes in metal parts while eliminating secondary operations. While .500 in. tool bore in spindle accepts Slater standard-length hex, square, and 6-lobe rotary broaches, special form broaches with serration, spline, involute spline, and polygon shapes can also be made for 0700 series.

Laser Photonics, Inc.    Lake Mary, FL 32746
Jan 19, 2009 Equipped with fiber laser, direct drive motion control platform, and single pallet shuttle table, Titan Series utilizes TurboPiercing(TM) technology, which completes accurate hole, eliminating unnecessary craters in material. With Cutting-on-the-Fly feature, laser beam is turned on and off as needed and is accurately positioned via computer-aided alignments. Materials are fixed in place directly under laser and pattern can be cut without stopping or braking axes.

Jet Edge    St. Michael, MN 55376
Jan 19, 2009 Featuring 21 x 13 ft work envelope, Jet Edge large-format Mid Rail Gantry Waterjet System includes exposed tank that accommodates overhead loading. Ball-screw driven system features abrasive jet cutting head and heavy-wall tubular steel construction that eliminates vibration. It utilizes industrial PC controller, with 3 axes fully programmable, direct-couple AC brushless digital servo motors, and single or double carriages. System is also available in 8 x 13 ft version.

FKI Logistex North America    St. Louis, MO 63132
Jan 19, 2009 Featuring modular design that promotes system flexibility, LS-4000E tilt-tray and LS-4000CB cross-belt sorters respectively consume 2.4 and 2.7 kW/hr (typ). This can be accomplished because integrated linear synchronous motor (LSM) drive generates propulsive force via electromagnetic energy, minimizing energy consumption and noise levels while increasing speed and positioning accuracy.

Abbeon California, Inc.    Santa Barbara, CA 93101
Jan 19, 2009 With transformer replaced by high-tech electronics, AZTC-20 electronic thermocutter cuts synthetic fabrics, plastic tubes, fiber optics, foam and similar materials that tend to crimp, serrate or unravel when cold cutters are used. Temperature in unit is controlled from zero to 1050ºF, while electrical current control switch allows selection of large blades. Cutting foot accessory lifts synthetic fabric or thin plastic off cutting surface before coming in contact with heated blade.

Siemens    New York, NY 10022
Jan 16, 2009 Utilizing image processing and matrix of several belt conveyors, Visicon Singulator is designed to singulate items with appropriate gap between them and to align them for further sortation downstream. System can singulate up to 9,000 items/hr continuously without recirculation, minimizing required floor space. Software-based control system makes it possible to stipulate important singulation parameters such as gapping, orientation, and left or right take-away direction.

Emuge Corp.    West Boylston, MA 01583-2121
Jan 16, 2009 Application-specific Conical Ball Nose End Mills enable impellers, blisks, turbine blades, and tire profiles to be machined without tool changes during 3- and 5-axis operations. Available in range of sizes, tools include uncoated designs able to mill aluminum and steels such as nickel-chrome and Inconel. TiALN-coated tools can machine steel materials up to Rc 45 in addition to cast/nonferrous metals. Mills are offered in 2 standard forms, 1 with shorter flutes for maximized rigidity.