Parkinson Technologies    Woonsocket, RI 02895
Dec 02, 2009 Designed as in-field retrofit for Dusenbery® Converting Systems, Model 81 features PLC, which takes operator entries for product specifics and processing preferences and continuously calculates precise machine settings to insure desired finished package qualities. Operator interface screen and recipe storage capabilities enable users to store and recall optimal settings. Model 81 replaces Models 61 and 71 unwind controls as well as DEL Slowdown rewind controls.

Bunting Magnetics Company    Newton, KS 67114 0468
Dec 02, 2009 Designed for die cutting thermal transfer label stock, Diamond coated flexible dies are resistant to corrosion. Black Diamond coatin on flexible dies reduces die lifting in small, tight corner die cutting applications, including die cutting stamps. Coatings create low friction which allows flexible dies to be used with aggressive adhesives without gumming up dies, facilitating flexible printing operations.

Hypertherm, Inc.    Hanover, NH 03755 0010
Dec 02, 2009 Featuring Extreme HyDefinition® technology, HyPerformance® HPR130XD® and HPR260XD® offer argon capabilities, 80 A mild steel bevel process, and PowerPierce(TM) technology for optimal piercing capability. Lead set offers wear resistance, while torch sleeve with integrated bearing design enables infinite rotation. With optional integrated laser pointer, users can accurately align torch on centerline axis or receive visual feedback for programming and robot alignment.

Dynabrade, Inc.    Clarence, NY 14031
Dec 02, 2009 Suited for heavy-duty applications, Die Grinders are available with .5 or .7 hp air motors. Each tool features rubber grip housing to insulate operator from vibration and cold air transmission, and ¼ in. collet that can be changed to 3/8 or 1/8 in. collet with available inserts. Offered in front and rear exhaust designs, Die Grinders provide speeds to 20,000 or 24,000 rpm. Rear exhaust models can accept overhose assemblies for minimized sound levels and/or exhaust redirection.

OK International    Garden Grove, CA 92841
Dec 01, 2009 Model APR-5000 XL/XLS Array Package Rework System reduces BGA lid temperatures, minimizing chance of failure by thermal damage. It also enables simultaneous use of inner and outer preheaters at programmable temperatures. System software simplifies rework, allowing safe, repeatable performance and simple profiling, while split vision system allows simultaneous view of opposite corners of component. It supports PCBs up to 24.5 x 24.5 in. to components down to 0.020 x 0.010 in.

Doosan Infracore American Corporation    Suwanee, GA 30024
Nov 30, 2009 Equipped with Tsudakoma TN161 or TN201 rotary turning tables, DNM400-31iA5 Vertical Machining Center features 36.2 x 17.1 in. loading area, while DNM500-31iA5 Vertical Turning Center has 47.2 x 21.2 in. capacity. TN models incorporate double-lead worm gears that mesh full length of teeth. Powered by 30 hp spindle motor capable of driving CAT 40 tools at speeds up to 15,000 rpm, both machines generate up to 1,655 lb thrust along X and Y axes, and 3,611 lb along Z axis.

Mazak Corp.    Florence, KY 41042 3092
Nov 30, 2009 Accommodating up to 5,500 lb on 59.1 x 31.5 in. work table, FJV-35/60 II employs 50 taper, 40 hp, 10,000 rpm spindle that generates up to 433 lb-ft torque for heavy-duty cutting of cast iron, steel, and aluminum workpieces. ATC tool chip-to-chip time is 5.0 sec, and 5-face machining option is available. In addition to feedrates of 1,574 ipm in X/Y axes and 1,181 ipm in Z axis, VMC features Z-axis stroke of 25.98 in. that enables machining of workpieces up to 25.20 in. high.

Helical Solutions Llc    Gorham, ME 04038
Nov 24, 2009 Available with ¼, 3/8, ½, 5/8, ¾, or 1 in. cutting diameter, HXF and HXF-RN end mill series feature corner radii for strength and 7-14 high-helix angle flutes for smooth cutting and optimal finish. Geometries are engineered to cut steels and exotic materials, such as aerospace and medical titanium. While both versions are suited for roughing and peripheral milling, HXF-RN series suits applications requiring extended reach into pockets or machining around obstructions.

Online Development Inc.    Knoxville, TN 37920
Nov 24, 2009 Using cATM-BLY90 Module, users can migrate legacy ABB Bailey Infi 90 or Network 90 DCS to ControlLogix PACs from Rockwell Automation. Once system data is available within ControlLogix PAC, Rockwell Automation applications such as FactoryTalk View SE can be used for visualization of data, alarming, and other functions. Module can process up to 5,000 blocks of data, and supports all existing DCS block functions including exception reporting, supervisory control, and system status monitoring.

Coastal Distributors    Belfast, ME 04915
Nov 23, 2009 Designed to fit most traditional razor scrapers, knives, and cutters, double edged Safe Scrape Blade is suited for applications where steel razor blade will scratch surface underneath whatever scraper is removing. Blade can remove paint, adhesive, bugs, labels, caulk, and other materials without harming surface material. Applications include aerospace, window manufacturing, auto and vehicle refinishing and detailing, and building waterproofing.

Pat Mooney, Inc.    Addison, IL 60101
Nov 20, 2009 Nishijimax NHC-850SQA and NHC-8310SQA, respectively designed for traverse sawing of plate and for sawing longitudinally, are fully automatic via programmable CNC. Saw spindle drive system results in 15-115 rpm blade speeds, and 21 hp induction motor drives saw blade spindle via reduction gearbox, which is controlled by FREQROL Inverter Drive. While NHC-850SQA can saw plate up to 3 in. thick and 24 in. wide, NHC-8310SQA handles plate up to 4 in. thick and 20 ft long.

Metabo Corp.    West Chester, PA 19380 4243
Nov 19, 2009 Cordless SB18 LT measures 8 13/16 in. long and features chuck that can be removed to drive screws with ¼ in. hexagon recessed spindle using accessory bit retainer. Powered by Li-Power Plus 18 V, 2.6 Ah battery, this 5.3 lb tool has aluminum die cast gear housing, Variospeed full-wave electronic speed control, and dual-range torque adjustment. Drilling capacity, with ½ in. chuck, is ½ in. for steel, 1 3/16 in. for wood, and 3/8 in. for concrete.

Pat Mooney, Inc.    Addison, IL 60101
Nov 19, 2009 Utilizing 25-70 rpm saw spindle drive system, Nishijimax NHC-230 can saw 9 in. round 1045 bar stock in 50 seconds and provide surface finishes from 40-80 RMS. System's 51 hp induction motor drives saw blade spindle via reduction gearbox. In addition to ensuring that precise feed rate is set automatically, NC saw spindle feed axis maintains input chip load. Saw blade feed rate is controlled via AC servo motor with encoder, programmable servo drive, and precision ball screw.

Universal Balancing Ltd./Reco    Pinckney, MI 48169
Nov 17, 2009 Featuring 2.2 x 2.4 x 1.3 m footprint, self-contained V100S Vertical Axis Balancing Machine provides 99.65% unbalance reduction ratio and is capable of handling any component weighing up to 100 kg that requires correction of unbalance by milling. Milling head delivers 300 Nm cutting torque, accommodates axial through radial positions, and cuts arc angles up to 180°. Capable of balancing in 1 or 2 planes, machine utilizes 10 in. air chuck with 2.5 micron repeatability.

Behringer Saws, Inc.    Morgantown, PA 19543
Nov 17, 2009 Model HCS 150 Behringer Eisele Automatic Carbide Circular Cold Saw is designed specifically to cut materials up to 5.9 in. in dia for solid rounds and squares up to 5.3 in. in size. System cuts ferrous metals at 90° with carbide-tipped saw blades ranging from 14.1-18.1 in. in diameter. Controlled by PLC, unit can store numerically controlled program applications such as number of pieces to be cut, length, and discharge handling. Machine includes sorting device and automatic chip conveyor.

Renishaw, Inc.    Hoffman Estates, IL 60192
Nov 17, 2009 AxiSet(TM) Check-Up enables users of 5-axis machining centers and multi-tasking mill-turn machines to identify and report on poor machine alignments and geometry. After automated probing routines gather performance data from reference artefact, measurement results are output to PC where supplied Microsoft® Excel® spreadsheet presents analysis of data and compares machine performance with defined tolerances.

Steinmeyer Inc.    Bedford, MA 01730
Nov 16, 2009 Available with 0.5-3 mm leads, 5 mm Miniature Ball Screws come in 4 nut styles. Single nut Series 1112 has connecting thread without wipers, while single nut Series 1412 has double flange and wipers on both ends, and Series 1214 consists of cylindrical nut without wipers. Using end-cap ball returns manufactured from plastic rather than metal tubes, single nut Series 2422 is virtually noiseless. Applications include micromanipulators, miniature robotics, and compact actuators.

Wabash MPI    Wabash, IN 46992 0298
Nov 16, 2009 Featuring 15 x 15 in. platen size, Triton Series includes high end controls for pressure and temperature ramping. PLC controller offers 3 in. touch screen and stores up to 10 programs. Operator controls include 2 clamp close buttons, clamp open, emergency stop, and power on/off. Guards include manual hinged front with magnetic safety switch interlock, sheet metal wrap that can be removed for maintenance access, and expanded metal windows.

Bardons & Oliver, Inc.    Cleveland, OH 44139
Nov 16, 2009 Allowing critical surfaces at each end of part to be machined concentric to each other, 4-axis Center-Drive Lathe has one 12-station turret that machines front end of work piece, while second 12-station turret simultaneously machines back end. Lathe can be loaded manually, robot-loaded, or configured with automatic barfeed to produce finished parts from full-length raw material. Product is suited for production of oilfield tool joints, axle housings, and conveyor rollers.

Vibra Finish, Limited    Mississauga, ON L4W1G6  Canada
Nov 16, 2009 Featuring steel media mixture in high-energy vibratory machine, Vibra-Max(TM) utilizes dual drive system to introduce vibration into media to develop multi-axis coverage effect. Media is designed for process, and parts can be processed free run, fixture to machine, or fixture to earth. Designed to increase tensile strength of metal parts without distortion or changes to molecular structure of metal, process evenly compacts part surface for smooth, mirror-like finish.