Other

Lubricants

Drill Rod Grease features biobased formula.

August 10, 2016

Designed to meet demanding requirements of drilling and mining industry, Biobased Drill Rod Grease offers optimized water washout properties and is almost entirely made of renewable biobased materials with no heavy metals. Product has environmentally safe additives to increase mass density, and is effective in and around high water-flow with balance of adhesiveness and cohesiveness. Using... Read More

Lubricants

Specialty Greases and Steel Technology Expertise Featured at AISTech 2016

May 16, 2016

Quaker Chemical Highlights its Comprehensive Fluid Solutions to the Steel Industry CONSHOHOCKEN, Pa. - Grease lubrication in an integrated steel plant presents a constant challenge given the harsh conditions placed on the process equipment. Complex factors such as heavy loads, high speeds, temperature fluctuations, and environments shifting from dusty to humid and acidic, demand proper grease... Read More

Lubricants

Heavy-Duty Grease handles heat in extreme environments.

March 31, 2016

Featuring Pressure Activated Technology™, Valvoline Cobalt™ Grease delivers ISO 1000 lubricating fluid, ensuring EP protection and sufficient film thickness on even heaviest-loaded metal surfaces. Lithium sulfonate complex thickening system provides metal with inherent corrosion protection in harsh environments, even salt water. In addition to minimizing friction, grease offers pumpability... Read More

Green & Clean, Lubricants

Wire Rope Grease meets VGP requirement.

November 11, 2015

Designed to meet requirement of Vessel General Permit, bio-based Wire Rope Grease is made from carefully selected renewable vegetable oils that are minimally impacted during processing in microwave-based manufacturing reactor. Aluminum complex grease, available in NLGI Grades 0 and 1, offers water washout resistance and provides naturally high degree of lubricity. Read More

Lubricants

Synthetic Grease protects food processing equipment.

October 8, 2015

NSF H1-registered for incidental food contact, H1 Quincal™ Syn FG Grease (4070-4072) comes in NLGI grades 0, 1, and 2 and is certified Kosher Pareve. Synthetic base fluid consists of calcium sulfonate complex thickener, which provides rust/corrosion prevention capabilities, and Quinplex impact-resistant additive. Formula promotes dropping point, pressure characteristics, and... Read More

Lubricants

Electric Motor Grease offers optimized thermal stability.

September 14, 2015

Recommended on sealed for life bearings and motors, Lectra Lube™ maintains its consistency under severe working conditions and resists oxidation. NLGI grade 2, polyurea thickened grease offers water resistance and will not wash out. Additive package enables product to be used in severe, heavy, and shock load conditions as well as in extreme pressure applications. It can also be used at elevated... Read More

Green & Clean, Lubricants

Wire Rope Grease suits applications near waterways.

August 19, 2015

Certified as Environmentally Acceptable Lubricant, Earthwise™ EAL Wire Rope Grease coats wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Semi-tacky, water-resistant characteristics enable lubricant to seal out damaging moisture, protect against rust formation, and shield against acid attack. Designed to meet specifications required by... Read More

Lubricants

Wire Rope Grease is formulated to be VGP compliant.

May 27, 2015

Available in pails, drums, or larger containers, biobased aluminum complex wire rope grease is Vessel General Permit (VGP)-compliant, contains >80% biobased content, and meets USDA biobased biopreferred labeling requirements. Biodegradable and non-toxic product, derived from NSF-registered Aluminum Complex Food Grade Greases, comes in NLGI grades 0 and 1, exhibits adhesive properties, and is... Read More

Lubricants

Synthetic Esters in High Temperature Grease

January 9, 2015

High viscosity synthetic esters have been used as basestocks in high temperature lubricants for many years, and are now available with the NSF HX1 designation for food processing applications. Synthetic ester based lubricants are effective for continuous operation at 260°C (500°F) and show little evaporation or oxidative degradation compared to other common basestocks. These benefits make... Read More

Lubricants, Machinery & Machining Tools

Specialty Grease keeps mills running smoothly.

December 18, 2014

In cold rolling and galvanize process, QUAKERTEK™ CS 4602-EP can provide equipment protection that prolongs asset life and prevents unnecessary breakdowns. Calcium sulfonate grease, offering water washout resistance, will stay in place and lubricate bearings even when fully submerged in water. In addition, product prevents bearing corrosion and provides shear stability, maintaining consistency... Read More

Lubricants

Machine Tool Spindle Bearing Grease improves tool performance.

December 9, 2014

Promoting operation at higher speeds and load conditions, RACEGRD™ improves operation reliability for bearings in machine tool main spindles. This grease also delivers anti-seizure performance and makes it possible to switch to grease lubrication in automobile component machining tools. Furthermore, suppression of grease leakage from bearings reduces temperature fluctuations during operation. Read More

Lubricants

Polymer Infused Oils and Greases for Industrial Use

November 7, 2014

Why choose Polymer infused lubricants? • Lasts 3-5 times longer than conventional lubricants • Resists water chemical washout. • Resists oxidation and chemical breakdown. • Reduced leakage • Lower temperature ranges. • Reduces amperage thereby reducing energy costs • Reduces wear. • Reduces downtime maintenance costs. • Consolidation of lubricants. • Reduced inventories. •... Read More

Lubricants, Materials & Material Processing

Ultra-Fine Filtered Synthetic Oil extends component life.

September 16, 2014

Designed to lubricate rolling bearings of high-speed machine tool spindles, Klübersynth FB 4 Series can also be used in hydraulic systems and components, including dirt-sensitive servo valves, where cleanliness standards/classes are predetermined by manufacturer. Purity of ISO VG grades 32, 46, and 68 helps extend component life by reducing wear caused by fine dirt particles in lubricant.... Read More

Lubricants

Plunger Lubricants and Robotic Greases suit die casting uses.

September 9, 2014

Formulated for aluminum die casting operations, PLUNGER SLICK™ 200T and PLUNGER SLICK™ WB10-T provide optimized boundary protection for plunger tips and shot sleeves. Key benefits include strong adherence to plunger tip, extended tip and sleeve life, and clean and bright castings. Featuring semi-fluid consistency, QUAKERTEK™ AXIAL 00-32 and QUAKERTEK™ LS 032B-EP are lithium type greases... Read More

Green & Clean, Lubricants, Machinery & Machining Tools

ELM Inc Earns USDA Certified Biobased Product Label

September 5, 2014

GRUNDY CENTER, IA – ELM Inc announced it has earned the USDA (United States Department of Agriculture) Certified Biobased Product Label for ten products. The USDA Certified Biobased Product Label verifies that the products' amount of renewable biobased ingredients meets or exceeds levels set by USDA. Biobased products are finished or intermediate materials composed in whole or in... Read More

Lubricants, Materials & Material Processing

Introducing Two New Technologies at AISTech 2014

May 5, 2014

Quaker expands its portfolio with Water Glycol Hydraulic Fluids and Greases CONSHOHOCKEN, Pa. - Quaker Chemical Corporation (NYSE:KWR) develops products that help customers adjust to the latest industry challenges and bring value to their processes. Quaker has expanded its product offering in the Steel industry with the addition of QUINTOLUBRIC® 702-46 RD Water Glycol Hydraulic Fluid to its... Read More

Lubricants, Machinery & Machining Tools

Disc Brake Wheel Bearing Grease meets severe duty requirements.

May 1, 2014

Supplied in 1 lb tub, Champion Disc Brake Wheel Bearing Grease (Part No. 4149I) consists of Lithium complex base grease formulated with refined base oil and additives. Appearance is smooth, somewhat tacky, slightly stringy, and blue. While capable of operations from -40 to +350°F, grease has dropping high point of >500°F. Other characteristics include mechanical stability, oxidation and... Read More

Lubricants, Machinery & Machining Tools, Materials & Material Processing, Paints & Coatings

Quaker to Exhibit Their "Front-to-Back" Solutions for the Tube & Pipe Industry at Tube Dusseldorf 2014

April 8, 2014

CONSHOHOCKEN, PA – Quaker Chemical Corporation (KWR), the only chemical specialty supplier to the Tube and Pipe industry to offer system-wide expertise, as well as a comprehensive portfolio of processing fluids and coatings, will exhibit at Tube 2014 on April 7 – 11 in Düsseldorf, Germany. Quaker will be in Hall 5, Stand E26, to showcase their "front-to-back" approach for integrated fluid... Read More

Laboratory and Research Supplies and Equipment, Lubricants, Services, Test & Measuring Instruments

SGS Herguth Leads the Way in Grease Analysis and Testing

March 20, 2014

Vallejo, Calif. – SGS Herguth Laboratories, an independent laboratory and industry leader in oil analysis and compatibility testing, is also unmatched when it comes to grease analysis and testing. SGS Herguth has seen its grease analysis and testing business grow in recent years, as customers in the transportation sector, the wind-energy sector, and industrial applications realize the... Read More

Adhesives & Sealants, Chemicals & Chemical Processing, Lubricants, Materials & Material Processing, Paints & Coatings

Copper-Filled Grease suits heat transfer applications.

March 19, 2014

Consisting of single-part, 100% solids, thermally conductive, silicone grease, Heat-Away™ 640 is used in heat transfer applications from -60 to 550°F. Product is formulated as thick paste that will not flow after application and maintains stable viscosity over entire temperature range. With thermal conductivity of 4.68 W/m-K, grease optimizes thermal transfer between heaters and process... Read More