Exxon Mobil Corporation
Fairfax, VA 22037
Aug 20, 2004 Formulated with proprietary thickener technology, Polyrex® EM Grease offers mechanical shear stability, rust inhibition, and deposit control. It offers protection even under demanding conditions such as high temperatures and speeds. Available in NLGI Grade 2, Polyrex EM is suited for electric motor bearings and ball- or lightly loaded roller-bearings.

Dylon Industries, Inc.
Cleveland, OH 44144 1045
Jul 09, 2004 Designed for forging warm or hot ferrous, super alloy, and powdered-metal parts, heavy-duty, water-based Dyforge 312 contains micro-fine graphite and proprietary binder additive package. It can wet dies that range in temperature from 150 to 1,300°F and provides anti-solder properties. Lubricant, effective in concentrated version and as dilution, helps extend die life, resulting in decreased downtime and reduced scrap rates.

WD-40 Co.
San Diego, CA 92138
Jun 03, 2004 Professional 3-IN-ONE Line includes High-Performance Lubricant Spray with PTFE, which extends life of tools and machinery by reducing friction and wear. Synthetic formula provides protection against corrosion under extreme temperature, pressure, and motion. Citrus-based Heavy-Duty Cleaner Degreaser attacks and dissolves grease to make equipment work like new. Advanced Engine Starter and Conditioner features non-ether formula that quickly starts and lubricates gas and diesel engines.

Radiator Specialty Co.
Charlotte, NC 28234
May 04, 2004 Liquid Wrench® includes Cerflon® ceramic-reinforced, chemical-resistant fluoropolymer to provide lubricity and wear resistance. Incorporated dispersion combines polytetrafluoroethylene (PTFE) with boron nitride. Normalized results from Ball on Cylinder Lubricity Evaluator show that base oil provided lubricity of 100; 111 with boron nitride; 119 with PTFE; and 127 with PTFE and boron nitride. Solids level for tests was 1%.

Diversified Brands, A Sherwin-Williams Business Group
Solon, OH 44139
Apr 28, 2004 Sprayon® 711 Liqui-Sol™ packaging features reusable spray trigger with adjustable spray dial that enables fan spray to pin stream. Sprayon 711 penetrates, lubricates, demoisturizes, and inhibits corrosion while offering dielectric strength of 47,000 volts. NSF approved and H2 rated, Sprayon 711 meets requirements of MIL-C-23411 and Naval Ordinance Systems Weapons Specs WS-14138. Product suited for use on bearings, machinery, electrical wiring, and connectors.

Anderol Company
East Hanover, NJ 07936
Mar 12, 2004 ANDEROL® PumpJack 150, formulated to optimize pump-jack energy efficiency and performance, decreases energy consumption and minimizes maintenance expenditures in cold-weather environments. It provides wear and rust protection and oxidation stability. ROYCO 800 compressor lubricants are formulated with pour points as low as -55°C to provide cold-weather protection for critical application components.

NYLOK Fastener Corp.
Macomb, MI 48042 4007
Mar 03, 2004 Suited for external and internal threaded parts, NYPLATE® anti-seize coating facilitates disassembly, even in aggressive environments and after heat exposure up to 1292°F. Non-toxic, environmentally-safe process forms dry, tack-free film lubricant with sealing properties. It seals immediately upon installation, prevents corrosion in installed condition, offers chemical resistance when assembled, and features storage life up to 4 years.

Break-Free, Inc.
Jacksonville, FL 32218
Dec 30, 2003 Cold Galvanize 99% protects against rust and corrosion on ferrous bar metal and previously galvanized surfaces. White Lithium Grease multi-purpose, all-weather, penetrating lubricant is water-resistant and contains rust and oxidation inhibitors. Extreme Duty Silicone helps eliminate sticking, binding, and squeaking. Heavy Duty Degreaser and Motor Cleaner helps clean electrical components and motors. Electric Grade Contact Cleaner degreases and cleans delicate mechanisms.

Dow Corning Corp.
Midland, MI 48686 0994
Dec 30, 2003 Molykote® P-1900 mineral oil-based paste can lubricate sliding surfaces and friction contacts exposed to heavy loads, especially at low to medium speeds. It offers water resistance, low coefficient of friction, and service temperature of -30 to 300°C. Molykote P-1900 is available in 400 g cartridges, 1 kg cans, 25 kg pails, and 180 kg drums.

WD-40 Co.
San Diego, CA 92138
Dec 11, 2003 Able to deliver product quickly and efficiently, WD-40 Big Blast utilizes wide-area spray nozzle, which allows user to cover larger surfaces in less time. Machinery and equipment covered with WD-40 receive protective coat that stops rust, shields against moisture, and prevents corrosion. Treatment, when used on heavy machinery, cleans and protects surfaces, penetrates stuck bolts, and lubricates moving parts.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Nov 19, 2003 Anti-seize stick lubricants facilitate dispensing directly onto parts, will not leak or drip, and can be stored in pocket or toolbox. Loctite® C5-A® copper-based lubricant shields against seizing and galling in dry service temperatures of -20 to +1,800°F. Loctite® Silver Grade heavy-duty thread lubricant has smooth texture for protecting fine threads and closely mated parts. It lubricates and permits disassembly of threaded parts in temperatures to 1600°F.

ExxonMobil Coal & Minerals Co.
Houston, TX 77063 2005
Oct 07, 2003 SpectraSyn™ synthetic polyalphaolefin basestocks feature viscosity ranges between 2–100 cSt at 100°C, and provide lubrication capabilities for car and diesel engines, gear boxes, and industrial applications. SpectraSyn Ultra™ Hi VI PAO products exceed 100 cSt viscosity. Synesstic™ AN Blendstock consists of API Group V category fluids manufactured to deliver hydrolytic, thermal and oxidative stability. Esterex™ ester basestocks are used in demanding applications.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
Sep 08, 2003 Nevastane® EP extreme pressure oils are offered with viscosities of 100, 150, 220, 320, 460, and 1,000. White oil based lubricants provide oxidation and rust protection as well as water separation. Non-toxic oils resist food acids and alkalis and are NSF H-1 Registered as part of the Hazard Analysis and Critical Control Point System. Lubricants are used in gear reducers, worm gears, bearings, and air compressors.

Dow Corning Corp.
Midland, MI 48686 0994
Sep 05, 2003 Molykote G-0100 mineral-based grease offers corrosion- and oxidation-prevention for motor bearings. Mineral oil-based Molykote G-0101 is suited for high-speed applications. Mineral oil-based Molykote G-0102 resists water washout. Multipurpose Molykote G-1001 suits most roller bearing applications. Synthetic oil-based Molykote G-2001 provides protection against wear and corrosion. Molykote G-6000 phenylether synthetic oil-based grease provides stability in high mechanical stress environments.

Dylon Industries, Inc.
Cleveland, OH 44144 1045
Jul 21, 2003 Heavy-duty, water-based Grade FW-3361 contains micro-fine graphite and EP additives to forge difficult, warm or hot, ferrous, non-ferrous, and super alloy metals. Also suited as back-extrusion lubricant, product can be used on dies with temperatures from 250 to 1000°F. Lubricant dilutes with water and is spray applied to dies for best results. Dilution ratios depend on job severity, and are usually 5:1 or greater.

LuBoron, LLC
Charlottesville, VA 22901
Jul 09, 2003 LuBoron™, with Boron CLS Bond® friction-reducing technology, requires only one use to reduce varnish and gum build-up on synchros and gears and to inhibit wear. Treatment reduces backlash tooth drag in differentials, allowing more horsepower to wheels. It forms low-friction, hard surface, impervious to most contaminants, and is compatible with synthetic and mineral-based lubricants. Applications include manual transmissions, transaxles, and final drives.

UNIST, Inc.
Grand Rapids, MI 49512
May 23, 2003 Suited for machining of ferrous materials, environmentally safe Coolube 2210EP works with Uni-Max applicators. Extreme pressure additive, blended to Coolube 2210, exhibits lubricity properties which facilitate near dry machining in heavy-duty cutting operations on all CNC, automatic screw, drilling, tapping, milling, turning, and hard turning machines. Product also extends longevity of, and time between, re-sharpening of tools.

ITW Fluid Products Group
Glenview, IL 60025
May 23, 2003 Biostable chlorinated semi-synthetic cutting fluid, Rustlick® Ultracut 375R, offers lubricity and rust protection for ferrous and non-ferrous metals. Translucent emulsion has chlorinated and non-chlorinated EP additives. Fluid is used for machining and grinding operations in machine shops and is available in 5 or 55 gal containers.

IMS Company
Chagrin Falls, OH 44023 5296
May 22, 2003 Economy Silicone-55L Mold Release contains 5% silicone concentration. It does not contain CFC's, HCFC's, Class 1 or Class 2 substances and can be used for food-packaging applications. Heat-resistant Die Makers Lubricant-L, with Teflon®, is blended to not dry and to minimize bleeding out with ejector pins, knockouts, slides, cams, and all moving parts. Teflon® additive minimizes galling and will not wipe away on closely fitted tooling.

WD-40 Co.
San Diego, CA 92138
Apr 25, 2003 Consisting of 4 products, 3-IN-ONE Professional Line suits lubrication needs of various trade professionals and includes petroleum-based High-performance Penetrant Spray and High-performance Drip Penetrant. Quick-drying Silicone Spray Lubricant has synthetic, no-mess formula that resists high temperatures and works in wet environments. Non-drip, heavy-duty, water- and heat-resistant White Lithium Grease lubricates and prevents rust and corrosion.