Other Lubricants

Lubricants

Klüber Lubrication to Showcase Specialty Lubricants at IEEE/IAS/PCA Cement Conference

April 26, 2016

Londonderry, NH - Klüber Lubrication, a worldwide manufacturer of specialty lubricants, will showcase its specialty lubricants in booth #409 during the IEEE-IAS/PCA Cement Conference in Dallas, Texas, May 15-19, at the Gaylord Texan Resort Convention Center. Subject matter experts from Klüber Lubrication will participate in a panel discussion on open gear lubrication during the conference... Read More

Lubricants, Mechanical Power Transmission, Services

Milacron's CIMCOOL® Fluids Approved for Use by Leading Aerospace Manufacturer, Pratt & Whitney

March 11, 2016

CINCINNATI – Milacron Holdings Corp. (“Milacron”) (NYSE: MCRN), a leading industrial technology company serving the plastics processing and industrial fluid industries, announced that its CIMCOOL brand; the leader in fluid technology, has communicated that four of its innovative fluids have received Pratt Whitney approval. These fluids are used in the manufacture of gas turbine components... Read More

Lubricants, Materials & Material Processing

P-80 Emulsion Pump and Seal Lubricant

March 2, 2016

P-80® Emulsion is the perfect solution for pump and seal assembly. P-80® Emulsion is a ready-to-use assembly aide that makes rubber and soft plastic easy to install, remove, cut or manipulate. It allows rubber parts to slide easily into place and stay there, securing a tight fit. The benefits of P-80® Emulsion: Eases parts into place. Reduces damage to parts. Temporary – Once dry... Read More

Fasteners & Hardware, Lubricants, Materials & Material Processing

Lock Lubricant, De-Icer reduces friction and wear.

February 29, 2016

Offered in 2 oz aerosol package (Part No. 03119) sized to fit in spaces ranging from desk drawers to toolboxes, Lock Lube and De-Icer melts ice, snow, and frost; lubricates seized or frozen locks and mechanisms; and loosens rusted lock parts. Graphite formula, optimized for longevity and accelerated drying, is safe for use on most plastics and will not stain or leave sticky residue. Package's 360° spray valve allows spraying from any position and provides no-mess application. Read More

Lubricants, Materials & Material Processing

Rust Inhibitor features solvent-free formula.

February 25, 2016

Providing industrial strength rust protection and lubrication without harshness of chemicals, HinderRUST is safe for environment. Product requires minimal surface preparation and covers in single coat. HinderRUST performs for sustained periods of time, bonding to metal surfaces, stopping or preventing corrosion, and providing silky slick lubrication that won't get tacky. Typical applications include machine ways, bearings, hinges, joints, molding dies, and motors. Read More

Lubricants, Machinery & Machining Tools

Biostable Coolant eliminates need for tankside biocides.

February 10, 2016

Developed for use in machine shops and industrial metalworking facilities, Shur Cool® 4055 is formulated to provide corrosion control, rust protection, and lubricity, all while naturally inhibiting microbial growth. Heavy-duty, semi-synthetic metalworking fluid enables machining centers to do without tankside biocide systems and their resultant odors, dermal irritation, and associated labor. Read More

Lubricants, Machinery & Machining Tools

CIMPERIAL® 861 with InSol(TM) Technology Metalworking Fluid Approved for Use at Bombardier

January 25, 2016

CINCINNATI – Milacron Holdings Corp. ("Milacron") (NYSE: MCRN), a leading industrial technology company serving the plastics processing and industrial fluid industries, announced that its CIMCOOL brand, the leader in fluid technology, has communicated that CIMPERIAL 861 with InSol™ Technology, a hybrid lubricity, semi-synthetic metalworking fluid, has recently received approval under... Read More

Lubricants, Material Handling & Storage

New Improved Package for P-80 1 Pint Containers

November 18, 2015

Burlington, New Jersey, USA – International Products Corporation (IPC) is pleased to announce the debut of a new metric container and updated package design for the pint size of P-80® Emulsion temporary rubber assembly lubricant. A new 475 mL bottle will replace the 1 pint container; it will be available in cases of 6 and 12. For those wishing to utilize a sprayer with the new bottle, a case... Read More

Lubricants

Metal Removal Fluids work with diverse array of materials.

October 26, 2015

QUAKERCOOL® 700, intended for ferrous machining, and QUAKERCOOL® 7000 Series, suited for aluminum and multi-metal machining, include 6 formulations to meet needs of automotive/heavy equipment manufacturers and components producers. Reducing use of hazardous materials, low-mist and -odor formulations offer emulsion characteristics that directly influence plant metrics by reducing chemical consumption or water use per part while defending against degrading materials. Read More

Food Processing & Preparation, Lubricants

Synthetic Grease protects food processing equipment.

October 8, 2015

NSF H1-registered for incidental food contact, H1 Quincal&trade; Syn FG Grease (4070-4072) comes in NLGI grades 0, 1, and 2 and is certified Kosher Pareve. Synthetic base fluid consists of calcium sulfonate complex thickener, which provides rust/corrosion prevention capabilities, and Quinplex impact-resistant additive. Formula promotes dropping point, pressure characteristics, and mechanical stability. Areas of use include blenders, cookers, filling/canning machines, and packaging equipment.<br /> Read More

Lubricants, Machinery & Machining Tools, Materials & Material Processing

Introducing New Smart Polymer(TM) Technology for the Die Casting Industry

September 24, 2015

CONSHOHOCKEN, Pa. – Uneven die protection caused by temperature variation on the die surface has been a constant challenge in the die casting industry. Temperature variation is caused by the variability in die size, design, complexity, flow of alloy through the die, and heat profile of each system. Traditional die lubricants, unable to adapt to the disparity in die temperatures, can be good... Read More

Lubricants, Materials & Material Processing, Green & Clean

Diesel Fuel Supplement helps maximize power.

September 22, 2015

Available in winter and summer versions, Full Torque&trade; Diesel Fuel Improver helps long haul diesel engine operators conserve fuel, protect equipment, and keep trucks on road despite harsh conditions. Cetane-boosted, detergent-containing formulation increases fuel&rsquo;s cetane number up to 3 numbers, resulting in accelerated ignition time, more power, and minimized smoke at startup. Winter version is especially useful in extreme cold weather, aiding in prevention of fuel gelling and ice formation. Read More

Lubricants

P-80® Temporary Rubber Lubricants - Now Available in 10ml Tubes - Ideal for Maintenance and Repair Kits!

September 21, 2015

Burlington, New Jersey, USA: The slip resistant nature of rubber makes it difficult to install, cut, remove or manipulate. Repair and installation of rubber parts can take considerable physical effort and time. In addition, improper part alignment or installation can lead to part failure and safety issues. Many jobs can benefit from the reduced friction and increased safety provided by P-80®... Read More

Lubricants

Electric Motor Grease offers optimized thermal stability.

September 14, 2015

Recommended on sealed for life bearings and motors, Lectra Lube&trade; maintains its consistency under severe working conditions and resists oxidation. NLGI grade 2, polyurea thickened grease offers water resistance and will not wash out. Additive package enables product to be used in severe, heavy, and shock load conditions as well as in extreme pressure applications. It can also be used at elevated temperatures while maintaining its structure. Read More

Lubricants, Materials & Material Processing

Product Solutions to Block the Formation of Damaging Bacteria

August 28, 2015

Quaker Chemical Corporation Exhibits at the 2015 Bluefield Coal Show CONSHOHOCKEN, Pa. – There are many challenges facing today's mining industry, so it is essential that a mine's longwall operations run at peak performance. Bacteria that live in longwall hydraulic fluid, can lower longwall performance. The bacteria consumes portion of the fluid in their growth by feeding on the... Read More

Lubricants

Metalworking Fluids perform multiple functions.

August 26, 2015

Formulated for use in both high-pressure systems and standard flood applications, Cimpulse&trade; Fluids are multifunctional products that allow metalworking shops to utilize one fluid in entire shop. Products utilize hybrid blend of lubricants to deliver optimal mix stability and minimized tool wear as well as extended sump life. Non-chlorinated, triazine-free Cimpulse 51MP provides high-pressure foam and corrosion control, keeping machines and parts clean. Read More

Lubricants, Green & Clean

Wire Rope Grease suits applications near waterways.

August 19, 2015

Certified as Environmentally Acceptable Lubricant, Earthwise&trade; EAL Wire Rope Grease coats wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Semi-tacky, water-resistant characteristics enable lubricant to seal out damaging moisture, protect against rust formation, and shield against acid attack. Designed to meet specifications required by EPA&rsquo;s Vessel General Permit, semi-fluid coating is biodegradable and exhibits minimal aquatic toxicity. Read More

Lubricants, Machinery & Machining Tools

Unist Announces New Addition to Its Coolube® Line of Advanced Cutting Lubricants

August 12, 2015

Coolube® 2210AL is specially formulated for use on aluminum Grand Rapids, MI — Unist, Inc. (www.unist.com) Unist has expanded its line of MQL lubricants with a new oil specifically formulated for use with aluminum. Like all of Unist’s fluids, Coolube® 2210AL is derived from natural vegetable oils, is machinist and environmentally friendly, and there... Read More

Cleaning Products & Equipment, Lubricants, Safety & Security Equipment

Product Solutions to Suppress Dust and Reduce Downtime

August 10, 2015

Quaker Chemical Corporation Exhibits at the 2015 Illinois Mining Institute (IMI) Annual Meeting CONSHOHOCKEN, Pa. - In any mining operation, particularly underground coal mining, respirable coal dust is a detrimental but inherent consequence, resulting in health and safety hazards to workers. Overexposure to respirable coal mine dust can lead to coal workers' pneumoconiosis (CWP), and the... Read More

Lubricants, Green & Clean

Metalworking Hazards Pose Occupational Health Risk without Proper Equipment

July 22, 2015

Posted on July 20, 2015 by Leonard Roulier in Air Quality, Energy Efficiency, Exhaust Systems vs Filtration, Filtering Options, Fume Extraction, Laboratory, Manufacturing, Optimization, Portable Systems, Small Businesses, Worker Protection The metalworking industry is no stranger to potential health risks since grinding, polishing, buffering and other similar processes all produce airborne... Read More