Lubrication Engineers, Inc.    Fort Worth, TX 76107
Mar 16, 2012 Available in SAE 5W-20 and 5W-30 grades, Monolec® Tetra-Syn(TM) Engine Oil incorporates Monolec® wear-reducing additive to protect against rust, corrosion, and oxidation and to prevent formation of ash and other deposits. Product also provides protection from high temperatures found in engines with turbochargers and superchargers. Typical applications include personal passenger cars, vans, and light trucks.

Universal Lubricants    Ohio, OH 2824 N
Feb 16, 2012 Consisting of up to 83% re-refined material, ECO ULTRA® completely eliminates new petroleum products from circulation in compressed natural gas fleets while meeting engine manufacturers' specifications and SAE requirements. Formulation provides optimal deposit, wear, oil oxidation, and oil nitration control in typically turbocharged engines fueled by natural gas. Low in phosphorous, ECO ULTRA® is available in SAE 30, 40, and 15W40.

Klüber Lubrication    Londonderry, NH 03053
Jan 09, 2012 Approved for use on Husky injection molding equipment, Klüberfood 4 NH1-46 provides oxidation stability and overall stability at extreme temperatures from -40 to 135°C, and offers protection against friction and wear. NSF H1 registered, fully synthetic formulation is compatible with all materials that are resistant to mineral oil, including neoprene, NBRE, FPM, PTFE, paints based on acrylic and epoxy resin, nylon, and PVC.

Hydrotex    Carrollton, TX 75006
Oct 28, 2011 Meeting NSF/ANSI Standard 60, Ultra-Kleen(TM) Drip Oil is formulated with pharmaceutically pure synthetic base oils with USDA/FDA authorized non-toxic anti-corrosion system. Additives work synergistically with base oils to provide optimal lubrication and corrosion control for water wells, potable water systems, and agricultural irrigation systems. Use of this product helps minimize consumption and extend equipment life.

CIMCOOL®    Cincinnati, OH Oh. 45209
Oct 28, 2011 Intended for heavy- to severe-duty machining and grinding operations with poor water quality, CIMPERIAL® 1072D is suitable for use with steels, stainless steels, hardened steels, exotics, and most aluminum alloys, including MIC® 6. Soluble oil offers mix stability in high hardness, high sulfate, and high chloride water conditions. Extreme pressure lubricant also extends tool and wheel life while optimizing part quality.

Cortec Corp.    St. Paul, MN 55110
Jun 16, 2011 Used to loosen frozen/rusted parts or as mold release, EcoLine® CLP maximizes life of machine parts by reducing friction and wear in addition to providing corrosion protection. USDA certified biobased product is non-flammable, non-toxic, and freeze stable and can be removed with common detergents. Safe for use on all metals and most plastics, multifunctional cleaner/lubricant/penetrant (CLP) leaves behind persistent layer that protects against corrosion for up to 24 months.

Valvoline Co. The, Div., Ashland, Inc.    Lexington, KY 40509
Apr 06, 2011 UltraMax(TM) lubricants include UltraMax TDTO TO-4M fluid with all-temperature protection, eliminating need for seasonal oil changes, and which meets requirements of ZF TE-ML03 for use in ZF torque converter transmissions. Products also include UltraMax Hydraulic Fluid, and UltraMax Transmission and Drive Train Oil that protects against gear wear, rust and corrosion, foaming, and oxidation. All are designed to minimize friction and wear in off-highway engines and equipment.

Michelman Inc.    Cincinnati, OH 45236
Mar 17, 2011 Made of natural oils and waxes, NatureShield® Emulsions provide water resistance and beading when used in wood, stone, and concrete coatings, stains, and sealants. With light golden tint, NatureShield 30 tung emulsion offers water-resistant finish that does not darken noticeably and provides wet look on stone surfaces. NatureShield 31 anionic emulsion helps prevent wood from swelling in presence of water, while NatureShield 40 film-forming emulsion provides moderate scratch and mar resistance.

Rust-Lick, Inc.    Glenview, IL 60025
Jan 28, 2011 ULTRACUT Aero is bacteria- and fungus-resistant cutting fluid that is optimized for use with metals such as titanium, aluminum, Inconel, and stainless steel. Non-chlorinated coolant contains no sulfur, boron, phenol, nitrites, copper, or SARA 313 reportable chemistry and has extreme pressure additives for optimal surface finish. It is available in 5 or 55 gal containers and is suited for use in aerospace, medical, and electronics industries.

G2 Fuel Technologies    Tampa, FL 33646
Jan 14, 2011 Supporting uses from cleaning to lubricating, Bio-Blast(TM) is composed of additives and bio-solvents that provide penetrating catalyst that is non-staining to metals. Product works by driving out moisture, providing dielectric insulation in electrical equipment, and removing rust/dirt. Formulated to penetrate into tight areas and prevent corrosion, lubricant performs with capillary wetting action that reduces surface tension and frees up frozen parts.

Sunnen Products Co.    St. Louis, MO 63143
Jun 16, 2010 Based on renewable vegetable formulation, SHO-500 cutting oil provides oxidation stability and is suited for honing applications where additives cannot be used, such as nuclear and some aerospace parts. Available in 5 gal pails, 55 gal drums, and 330 gal totes, oil can be used with conventional vitrified honing abrasives and metal-bond super abrasives.

Blaster Chemical Co.    Valley View, OH 44125
May 10, 2010 Containing sulfur, chlorine, wetting, and anti-weld agents, light-colored Cut 'N Cool is suited for stainless steel, carbon steel, aircraft steel, cast iron, aluminum, and other hard alloys. Product's petroleum base helps prevent rust on machinery, tooling, and materials. Formulated to meet stringent environmental regulations, Cut 'N Cool comes in recyclable aerosol package.

ITW Rocol North America    Glenview, IL 60025
Feb 25, 2010 Formulated with chlorinated and non-chlorinated EP additives, respectively, Rustlick PowerCool MaxLife and PowerCool MaxLife CF coolants provide biostability and performance for heavy-duty cutting and grinding applications. They can be used on ferrous/non-ferrous metals, aluminum, brass, bronze, and copper. Available in 5 or 55 gal containers, products suit wide range of low to heavy-duty applications, including machining and milling. PowerCool MaxLife CF can also be used on titanium.

LENOX    East Longmeadow, MA 01028
Feb 24, 2010 Formulated with Extreme Pressure additive, CYCLE HD is suited for moderate to heavy-duty machining of ferrous and non-ferrous metals. Product resists bacteria, extending sump life and providing odor control. Fluid is prepared with small oil droplets that prevent separation of oil from water, which leads to stable emulsion. Low foaming and low misting, CYCLE HD offers optimal performance in sawing, drilling, milling, tapping, and turning applications.

Doall Sawing Products    Des Plaines, IL 60016
Feb 01, 2010 Providing tramp oil rejection and control of bacteria and mold, semi-synthetic Kool-ALL Ultra® extends sump life. Power-Cut Ultra® soluble oil has emulsifiers that mix with water and can handle alloy steels such as 300 series stainless steel. Featuring low foaming tendency, Synthetic Kleen-Kool Ultra® optimizes fines release and hard water tolerance, minimizing grinding swarf and maintaining unclogged grinding wheel. All use recyclable containers and liners that are tamper-resistant.

Lubrication Engineers, Inc.    Fort Worth, TX 76107
Jan 19, 2010 Applied manually or via automatic spray systems, Wirelife(TM) Almasol® Syn Coating Lubricant provides outer surface protection for wire rope and cable in mining/construction industries and marine environments. Nonasphaltic synthetic lubricant clings to metal surfaces and reduces wear by minimizing wire-to-wire contact within rope. Synthetic base fluid as well as synergistic blend of wear-reducing additive and extreme pressure additive promote film strength and load carrying capacity.

Rust-Lick, Inc.    Glenview, IL 60025
Dec 02, 2009 PowerCool coolants are safe for all metals, including ferrous/non-ferrous metals, aluminum, brass, bronze, and copper. Products can be used for wide range of low to heavy-duty applications including machining, cutting, grinding, and milling. Coolant is available in 2 versions, PowerCool contains chlorinated EP additives and PowerCool CF contains non-chlorinated EP additives. Both are available in 5 or 55 gal containers.

Klüber Lubrication    Londonderry, NH 03053
Nov 03, 2009 ISO 21469 certified and registered for use in food processing and pharmaceutical industries, Klüberoil® NH1 G 1 US Series consists of mineral white oil, while Klüberoil® NH1 G 4 US Series offers synthetic version. Both perform in high and low temperatures, providing wear protection for gear teeth and rolling bearings. Applications include equipment in bottling operations, meat and poultry processing, dairy operations, fruit and vegetable processing, and pharmaceutical plants.

Petro-Canada Lubricants    Mississauga, ON L5J 2Y3  Canada
Dec 10, 2008 Formulated for both on- and off-road fleets, API CJ-4 category DURON-E 10W-30 offers extended drain intervals, low engine wear, minimized oxidative thickening, corrosion protection, and optimal top-up and cold start-up performance. Product is suited for 4-stroke diesel, gasoline, and natural gas automotive applications where SAE 10W-30 is recommended, including engines equipped with exhaust aftertreatment devices such as diesel particulate filters and catalytic reactors.

Chevron Products Co.    San Ramon, CA 94583
Nov 18, 2008 Suited for pre- and post-2007 heavy duty diesel engines and light duty diesel pick-up trucks, Delo® 400 LE Synthetic SAE 5W-40 is formulated using optimal blend of dispersant, detergent, oxidation inhibition, antiwear, corrosion inhibition, viscosity improver, and defoaming additive technologies. It offers cold startup capabilities, and meets or exceeds all major API, ACEA, and diesel engine manufacturer's requirements.