Chemetall Oakite
New Providence, NJ 07974
Jan 11, 2008 Formulated from blend of silicone and nonionic emulsifiers, Oakite® FiSan E-Z Glide Conveyor Lubricant can be used on stainless steel, glass, aluminum, and plastic conveyor lines. It contains ingredients accepted by U.S. Food and Drug Administration. Dispensed through automatic feed systems, synthetic, near-neutral lubricant also exhibits spill tolerance.

SBS Synthetic Oil, LLC
Brownsburg, IN 46112
Oct 01, 2007 Intended for automotive gasoline engines, AMSOIL 100% Synthetic 0W-20 Motor Oil is made with synthetic technology and long drain additives in light viscosity formulation that resists oxidation and neutralizing acids. Uniform molecular structure helps it flow freely to minimize friction between metal surfaces. Heavily fortified with detergent and dispersant additives, oil prevents sludge deposits and keeps engines clean. Product stays fluid down to -65°F.

Chevron Products Co.
San Ramon, CA 94583
Sep 05, 2007 Texaco Syn-Star GL 75W-90 synthetic gear oil meets Revision C of Dana Corporation's Spicer Axle Division SHAES 256 specification. Meeting all major OEM warranty requirements, it is recommended as rear axle and differential lubricant in on- and off-highway vehicles when operating under severe conditions and in extremely cold or hot environments. It offers extended drain capabilities as well as thermal and oxidation stability.

ExxonMobil Research and Engineering Company
Fairfax, VA 22037
Aug 15, 2007 Formulated with select basestocks and additives, Mobil DTE 700 is designed for use in light- and moderate-duty gas turbines as well as steam turbines. It has passed MHI Dry-Turbine Oil Stability Test and demonstrates demulsibility retention, oxidation stability, and deposit control. Solution is designed to help companies maximize productivity of their turbines.

Interflon
Roosendaal 4047 RK  Netherlands
Jul 27, 2007 Suited for conveyors and slide ways, Interflon Slide Wax sets up clean, non-greasy lubrication film that enables goods to be conveyed with minimized resistance and force. Product is formulated with Teflon® and other resins for lubricity and adhesion as well as low friction. Packaged in 500 ml aerosol, lubricant is NSF certified for use in food processing areas. It clings to horizontal and vertical ways, eliminates stick-slip, and resists wash-off, dirt, dust, and abrasives.

Nano Chemical Systems Holdings, Inc.
Seaford, DE 19973
May 21, 2007 Featuring non-toxic and 100% bio-degradable formula, NANOIL(TM) nano-enhanced, green motor oil eliminates disposal concerns and can reduce or eliminate need for disposal of crank case oil as toxic waste. Bio-fuel production can be enhanced by utilization of materials needed to be removed from Biodiesel and using said materials as feed stocks for NANOIL.

Milacron Inc.
Cincinnati, OH 45206
May 16, 2007 Designed for heavy-duty machinery as well as grinding on ferrous and non-ferrous metals, CIMPERIAL® Z Fluids feature characteristics that lend to corrosion protection, lubricity, minimized foaming, and rancidity control. Machine-friendly solutions, which include CIMPERIAL® 1060CFZ/1080CFZ/HD265Z, promote sump and tool life while minimizing concentrate usage.

ITW Rocol North America
Glenview, IL 60025
May 02, 2007 Safe for use on all metals, Accu-Lube LB-2000FM helps extend tool life by providing lubricity to cutting edge. Natural, environmentally safe metalworking oil has nontoxic and biodegradable formula and is consumed in cutting process, minimizing clean up and disposal. In addition to being suited for sawing of solids up to 6 in. dia, as well as tubing of almost any size, product suits medical applications requiring small diameter machining, drilling, and tapping.

Tracer Products
Westbury, NY 11590
Nov 30, 2006 Formulated for mobile A/C systems, POE and PAG refrigerant oils are premixed with co-solvent-free, super-bright, OEM-approved Fluoro-Lite® fluorescent dye. Tracerline® dyed oils, safe to use with all types of refrigerants and compressors, exhibit optimal R-134a miscibility, lubricity, and stability. Nontoxic and nonhazardous, products offer antiwear properties and work with any standard fluorescent leak detection lamp. They come in 8 oz, 32 oz, and 1 gal sizes.

Exxon Mobil Corporation
Fairfax, VA 22037
Nov 22, 2006 Suited for all critical gearbox components including gears, bearings, and seals, Mobilgear 600 XP Series of premium industrial gear oil helps control micropitting and other forms of gear wear. Its balanced formulation improves bearing and corrosion protection while remaining compatible with commonly used gearbox sealing materials. Mobilgear 600 XP can also reduce formation of oil degradation byproducts.

ExxonMobil
Irving, TX 75039-2298
Nov 08, 2006 Providing gearbox wear protection, Mobilgear 600 XP helps control micropitting and other forms of gear wear. Balanced formulation offers bearing and corrosion protection while remaining compatible with commonly used gearbox sealing materials. Product also minimizes formulation of oil degradation by-products that lead to frequent oil changes. Mobilgear 600 XP surpasses industry specifications such as Flender BA Table 7300 A, DIN 51517 Part 3, and AGMA 9005 E02.

Valvoline Co. The, Div., Ashland, Inc.
Lexington, KY 40509
Nov 02, 2006 Suited for high-speed 4-stroke cycle diesel engines, Premium Blue® SAE 15W-40 Oil is designed to meet 2007 model on-highway exhaust emissions. Product is formulated to optimize corrosion protection for all engine parts and to provide soot control and shear stability. Oil performs in emissions treatment equipped with sophisticated emissions control hardware, including exhaust gas recirculation, diesel particulate filters, and Caterpillar ACERT® technology.

CRC Industries, Inc.
Warminster, PA 18974
Aug 29, 2006 Formulated from blend of silicones, cross linkers, and oils, Chute Lube(TM) lubricates package handling equipment, food processing equipment, chutes, guides, and rail conveyors. Colorless, odorless product will not stain or cause packages to become greasy and is harmless to most rubbers and plastics. Available in 20 oz aerosol cans, Chute Lube(TM) is effective in wide range of temperatures and is NSF H2 registered for use in meal and poultry plants.

J Walter Inc.
Hartford, CT 06114
May 09, 2006 Designed to super-cool bolts to -30°F, COLD SHOCK(TM) causes cold-cracking action of rust and corrosion, allowing oil to seep deep inside threads and nut or bolt to be removed instantly. Available in 400 ml aerosol cans, product is effective on bolts up to 3 in. in diameter and for removing difficult bearings from shafts.

Federal Process Corp.
Cleveland, OH 44128
Mar 23, 2006 Engineered for use on metal, plastic, and electrical materials, Lube-It All® dry-film protective lubricant helps eliminate friction, abrasion, and corrosion issues on automotive and heavy-duty surfaces. It instantly forms dry coating that penetrates fine scratches and gaps to protect assembled parts and obstructed surfaces. Formulated to displace and repel moisture, product contains molybdenumdisulphide technology and does not attract dust.

Milacron Inc.
Cincinnati, OH 45206
Mar 07, 2006 Designed for heavy-duty machinery and grinding on both ferrous and non-ferrous metals, CIMPERIAL® Z Fluids offer corrosion protection, lubricity, low foaming characteristics, and rancidity control. They contain extreme pressure additives, which optimize machining and grinding in difficult applications.

Master Chemical Corporation
Perrysburg, OH 43552
Dec 08, 2005 Chlorine-free, low-foam TRIM® VHP® E812 is suited for vertical and horizontal machining centers equipped with high-pressure, through-the-tool coolant delivery systems as well as centerless, cylindrical, and creep feed grinding of ferrous and non-ferrous metals. Product does not foam while still keeping machine clean, rapidly wetting chips and tools to prevent corrosion.

BP Lubricants USA, Inc.
Wayne, NJ 07470
Dec 01, 2005 Blended with partial synthetic base stock, Castrol® Hypuron(TM) S protects engines while optimizing component and equipment life, allowing fleets to extend service intervals. In addition to providing dispersancy to manage high soot levels generated by EGR engines, product offers detergency to neutralize high acid levels. Oil is formulated with low ash technology, minimizing oil consumption and piston deposit formation.

Shell Lubricants
Houston, TX 77002
Nov 29, 2005 Mineral-based Shell Omala, suited for highly loaded gearboxes operating under normal temperatures, exhibits water separation properties critical for operations in wet environments. Formulated for harsh industrial environments, Shell Omala HD synthetic oil is based on PAO and other select additives and exhibits thermal and oxidative stability. Synthetic Shell Tivela S is designed for enclosed, sealed-for-life or worm-helical gear units operating at higher temperatures.

Dow Corning Corp.
Midland, MI 48686 0994
Sep 09, 2005 Providing thermal and oxidative stability, Molykote® L-21XX Series PAO extreme pressure gear oils overcome severe operating conditions such as temperature extremes, shock load, or vibration. They combine protection against scuffing and micro-pitting with water separation and corrosion protection. Formulated with additives to inhibit rust and suppress foam, oils are available in ISO viscosities of 100, 150, 220, 320, 460, and 680.