Anderol Company
East Hanover, NJ 07936
Dec 06, 2005 Formulated with polyol esters, Chain Oil XL prevents carbon deposit formation, optimizes cleanliness, and reduces varnish and sludge. Lubricant, available in ISO Viscosity Grades 150 and 220, has flash point of 600ºF and is compatible with mineral oil and ester-based products. Product exhibits lubricity and load carrying characteristics suited for promoting performance of chain sprockets, pins, bushings, plates, rollers, and link plates.

BP Lubricants USA, Inc.
Wayne, NJ 07470
Dec 01, 2005 Blended with partial synthetic base stock, Castrol® Hypuron(TM) S protects engines while optimizing component and equipment life, allowing fleets to extend service intervals. In addition to providing dispersancy to manage high soot levels generated by EGR engines, product offers detergency to neutralize high acid levels. Oil is formulated with low ash technology, minimizing oil consumption and piston deposit formation.

Shell Lubricants
Houston, TX 77002
Nov 29, 2005 Mineral-based Shell Omala, suited for highly loaded gearboxes operating under normal temperatures, exhibits water separation properties critical for operations in wet environments. Formulated for harsh industrial environments, Shell Omala HD synthetic oil is based on PAO and other select additives and exhibits thermal and oxidative stability. Synthetic Shell Tivela S is designed for enclosed, sealed-for-life or worm-helical gear units operating at higher temperatures.

Master Chemical Corporation
Perrysburg, OH 43552
Oct 11, 2005 TRIM® MicroSol® 585 provides cleanliness and lubricity to keep machine tools up and running gray iron and multi metal machining operations. Product provides cooling and wetting of surface active synthetic along with machine- and operator-friendliness of soluble oil. Compatible with variety of materials, product provides corrosion inhibition and eliminates hot chip hoppers and clinkering problems associated with machining gray cast iron.

Dow Corning Corp.
Midland, MI 48686 0994
Sep 22, 2005 Available in light and medium consistencies (NLGI No. 1 and No. 2), Molykote® 33 lubricates plastic gears, bearings, and cams as well as metal and rubber parts that must remain operable when subjected to low operating temperatures, weathering, and oxidation. It has service temperature range of -100 to 400°F and can be used on freezer cart casters, cold room conveyor equipment, various meters and utility disconnect switch contacts.

Exxon Mobil Corporation
Fairfax, VA 22037
Sep 20, 2005 Formulated with aluminum complex thickener technology, Mobilgrease(TM) FM 220 Series offer pumpability, water and fluid resistance, mechanical shear stability, and rust inhibition. Greases protect against wide range of load, speed, temperature, and environmental conditions. Available in National Lubricant Grease Institute Grades 1 and 2, both Mobilgrease FM 221 and Mobilgrease FM 222 carry NSF H1 registration and are approved as Kosher and Halal.

Dow Corning Corp.
Midland, MI 48686 0994
Sep 09, 2005 Providing thermal and oxidative stability, Molykote® L-21XX Series PAO extreme pressure gear oils overcome severe operating conditions such as temperature extremes, shock load, or vibration. They combine protection against scuffing and micro-pitting with water separation and corrosion protection. Formulated with additives to inhibit rust and suppress foam, oils are available in ISO viscosities of 100, 150, 220, 320, 460, and 680.

Jet-Lube, Inc.
Houston, TX 77028 5811
Aug 22, 2005 From food grade applications to high-temperature kilns, EP Greases are formulated to extend service life and maintenance intervals associated with industrial, processing, manufacturing, and construction equipment. Over 25 formulas are available for extreme temperature, high loads, and salt-water resistance. Depending upon application, greases meet NSF, MIL, USDA, and DOT specifications. All are available in packaging ranging from cartridges to 50-gal drums.

Dylon Industries, Inc.
Cleveland, OH 44144 1045
Aug 17, 2005 Water-based, synthetic ferrous forging lubricant, Grade FW-3857, provides lubricious coating on dies that are normally in 170–500°F range. It dilutes with water, with ratios dependent upon severity of job. Lubricant does not produce fumes or gases associated with other synthetic or non-synthetic lubricants. Best results are obtained when Grade FW-3857 is sprayed by conventional methods.

T & L Specialty Company, Inc.
Tupelo, MS 38803
Aug 09, 2005 Developed for use in machine shops and industrial metalworking facilities, Shur Cool® 4055 is formulated to provide corrosion control, rust protection, and lubricity, all while naturally inhibiting microbial growth. Heavy-duty, semi-synthetic metalworking fluid enables machining centers to do without tankside biocide systems and their resultant odors, dermal irritation, and associated labor.

FS-Elliott Co., LLC
Jeannette, PA 15644-1482
Jul 29, 2005 Corona Turbo Blue™ is a synthetic and petroleum-based blend with life expectancy of 16,000 hr, while Corona Turbo Clear™ pure synthetic lubricant is made from polyalphaolefin base stock and is expected to last up to 24,000 hr. Minimizing sludge build-up, both include rust and corrosion inhibitors, oxidation control agents, and anti-wear compounds. Corona Turbo Clean™ flushes lubrication system prior to conversion from another type of lubricant.

Cortec Corp.
St. Paul, MN 55110
Jul 27, 2005 VpCI™ Super Penetrant breaks through ½ in. rust in 30 min, displacing moisture and water, and lubricating metal so frozen parts can move freely. Product forms ultra thin film on metal that offers up to 3 months of protection against re-rusting and further corrosive attack. Suited for indoor and outdoor uses, penetrant can be applied by brush, squirt, hand pump spray, aerosol, and spray gun. Applications include chains, hinges, linkages, and nuts.

WD-40 Co.
San Diego, CA 92138
Jul 27, 2005 WD-40® Smart Straw sprays as stream through permanently attached straw for hard-to-reach jobs, or when straw is folded down, via wide-area sprayer to cover large surface area. Product comes in 12-pack cases, 40-count floor stands, and 150-count half-stacks.

Blaser Swisslube Inc.
Goshen, NY 10924
Jul 22, 2005 Vascomill 22 provides lubrication of CNC machinery for metal removal operations from low to high cutting speeds. Derived from renewable raw materials, oil has high flashpoint for viscosity, and generates minimal mist, vapor or smoke. Suitable for Swiss-automatic lathes, oil can be used in machining stainless steel, titanium, high temperature alloys, beryllium copper and in medical industry applications.

ITW Rocol North America
Glenview, IL 60025
Jul 19, 2005 Accu-Lube® 9045 attaches to 3-pump Accu-Lube® applicator system and applies smooth coat of lubricant directly to cutting edge and on both sides of saw blade. Nozzle mixes lubricant and air right at nozzle, so there is no lag time and no dry cutting. Mounting block facilitates installation, blade changes, and alignment.

HASCO Hasenclever GmbH + Co KG
Lüdenscheid D-58513  Germany
Jul 15, 2005 Supplied in 40 g, 1 kg tin, and 10 kg bucket, A 7002/... provides conservative lubrication to help extend service life of Z 412 plasmanitrided ejector pins as well as all moving parts. Drip point is over 175°C, and mold temperature processing is 1,400°C. Grease should be applied thinly to moving surface.

Dylon Industries, Inc.
Cleveland, OH 44144 1045
Jul 15, 2005 Suited for industrial bearings, Grade GR-650 features ashless synthetic base stock that provides thin film lubrication and maintains grease structure at temperatures of 650–700°F. Barrier film strength fights excessive friction and wear at high speed, heavy load, and in high-temperature service. Added chemistry built into GR-650 provides protection that is needed if grease cycle is missed. Grease comes in tubes, 5 gal pails, 120 lb kegs, and 400 lb drums.

Anderol Company
East Hanover, NJ 07936
Jun 24, 2005 ANDEROL® 3832 exhibits anti-wear properties, high temperature oxidation, rust protection, and corrosion inhibition. Engineered for performance in freezing climates, lubricant minimizes cold weather start up torque and lowers power consumption through low temperature fluidity.

Federal Process Corp.
Cleveland, OH 44128
Jun 23, 2005 Free All® Deep Penetrating Oil features silicone-free formula that quickly dissolves rust and corrosion, eliminating need for torching, drilling, hammering, and chiseling to free virtually any frozen fastener or part. Suitable for auto, home, and marine uses, Free All will not damage painted surfaces, and is available in 12-, 6-, and 2-ounce spray cans and ½ oz single-use bottles.

Blaser Swisslube Inc.
Goshen, NY 10924
Jun 23, 2005 Developed for machining and grinding of ferrous and non-ferrous materials, mineral oil based BC20SW micro emulsion is suited for heavy duty or difficult operations. Biological concept eliminates need for tank side additives or biocides, and fluid provides foam control in soft water that contains less than 180 ppm calcium.