Green & Clean, Lubricants

Marine Wire Rope/Chain Lubricant has low toxicity formulation.

January 19, 2010

Protecting against rust and corrosion, Wirelife(TM) Low Tox® Penetrating Lubricant suits applications where wire ropes and chains operate in close proximity to waterways. Solution biodegrades slowly but with minimal toxic effect on environment, particularly aquatic organisms. Able to be dipped, sprayed on, or hand-applied, lubricant is optimized for load-carrying capacity and exhibits... Read More

Lubricants, Portable Tools

Cordless Grease Gun delivers over 8,000 psi.

January 15, 2010

Powered by Lithium-Ion battery, Model 2446-21XC provides minimum flow rate of 2.6 oz/min at 1,000 psi and can dispense up to 7 grease cartridges per battery charge. Cordless grease gun features ergonomic handle for user comfort and onboard hose storage and shoulder strap loop. Measuring 14 in. long, gun is supplied with 36 in. flex hose with spring guard, grease coupler, M12(TM) XC Lithium-Ion... Read More

Green & Clean, Lubricants

Metal Removal Fluid suits aerospace, medical applications.

January 14, 2010

Optimized for long-life, lubricity, and low odor, TRIM® E850 premium emulsion metalworking fluid meets aerospace and medical device manufacturing requirements. It has no animal-based ingredients or chlorinated paraffin, has mild contact properties, and is readily washable. Blend of vegetable-based technology and traditional lubricity additives optimizes surface finish on difficult-to-machine... Read More

Green & Clean, Lubricants

Rubber Assembly Lubricant provides temporary lubrication.

January 12, 2010

Designed for use on non-porous and coated rubber surfaces, P-80® RediLube eases assembly of tight-fitting parts. Product is biodegradable and does not contain alcohol, petroleum, distillates, or silicone. Safe to use on most natural and synthetic rubbers, metals, and plastics, P-80® RediLube facilitates installation of hoses, bushings, seals, O-rings, grommets, and grips. Read More


Metalworking Fluid suits difficult-to-machine materials.

January 11, 2010

Chlorine EP activated Tech-Cool® 35052 is designed for use with aluminum alloys, stainless steels, titanium, and high nickel alloys, such as Inconel and Hastalloy. Semi-synthetic, low foaming product delivers lubricity, corrosion resistance, and cleanability, as well as emulsion stability, which allows for residue-free operation. Highly bio-resistant, Tech Cool® 35052 provides protection... Read More

Lubricants, Materials & Material Processing

LPS Introduces: KB 88 the Ultimate Penetrant in a Trigger Spray Bottle

January 11, 2010

TUCKER, GA -LPS Laboratories announces the introduction of KB 88 The Ultimate Penetrant in a Trigger Spray Bottle. KB 88 is a premier, rust busting, penetrating fluid which quickly cuts through rust and frozen parts. With extremely high solvency, low surface tension, and special additives, KB 88 enhances penetration, lubrication, and corrosion attack. This unique penetrant outperforms the... Read More

Fluid & Gas Flow Equipment, Lubricants, Material Handling & Storage

Dispense-Valve Applicator optimizes robotic fluid dispensing.

December 16, 2009

Suited for fixed, automated, or robotic fluid-dispensing with shaped-orifice fluid nozzles, Servo-Ribbon Applicator combines ac servomotor and fluid-dispense valve to robotically position valve's tip at correct angle to deliver ribbon-shaped pattern. While following bead path, SRA valve turns dispense tip without turning fluid-dispense valve, optimizing valve's reach and material flow rate. SVA... Read More

Lubricants, Machinery & Machining Tools

Water-Soluble Coolants help extend sump life.

December 2, 2009

PowerCool coolants are safe for all metals, including ferrous/non-ferrous metals, aluminum, brass, bronze, and copper. Products can be used for wide range of low to heavy-duty applications including machining, cutting, grinding, and milling. Coolant is available in 2 versions, PowerCool contains chlorinated EP additives and PowerCool CF contains non-chlorinated EP additives. Both are available in... Read More

Fluid & Gas Flow Equipment, Lubricants, Materials & Material Processing

Specially Formulated Octane Booster from Justice Brothers

December 1, 2009

Duarte, CA: Formulated in the USA by the Justice Brothers laboratory team of chemical engineers, Octane Booster has been proven to stop knocking, pinging and overheating due to today's low octane fuels. This handy additive is compatible with both unleaded and leaded gasoline, and Octane Booster also will help prevent hard starting or detonation when a hot engine is shut off. Each year, new... Read More


General Purpose Thread Lubricant is non-flammable.

November 30, 2009

Available in 8 oz brush-top bottle, CRC Thread Lubricant prevents seizing and galling caused by high temperatures, heavy loads, vibration, and corrosion. It is safe for use on both ferrous and non-ferrous metals and will not compromise integrity of soft metals. Formuation has smooth texture, low odor, is non-flammable, and fine particle sizing makes it suitable for closely fitted parts. Read More


Chlorine-Free, Universal Coolant extends metalworking tool life.

November 4, 2009

As mineral oil-based micro-emulsion, Blasocut® BC935 promotes extended tool life and optimal surface finish in machining and grinding of cast iron, steel, stainless steel, aluminum, and high-temperature alloys. Water-soluble solution, suited for individual machines and central filter systems, features microbiology and spontaneous emulsification properties that provide potentially unlimited... Read More


Gear Oils suit food service and packaging industries.

November 3, 2009

ISO 21469 certified and registered for use in food processing and pharmaceutical industries, Klüberoil® NH1 G 1 US Series consists of mineral white oil, while Klüberoil® NH1 G 4 US Series offers synthetic version. Both perform in high and low temperatures, providing wear protection for gear teeth and rolling bearings. Applications include equipment in bottling operations, meat and... Read More


Metalworking Fluid is compatible with wide range of materials.

October 8, 2009

Designed to perform well in multi-metal, multi-operational job shops, semi-synthetic low-odor TRIM® SC520 uses EP-additive package to control built-up edge and improve tool life. Wetting and cooling characteristics are appropriate for high-speed milling and turning operations, while degree of lubricity suits down-the-hole operations in aluminum, cast iron, and most steels. Able to control chip... Read More

Lubricants, Material Handling & Storage, Plant Furnishings & Accessories

New MQL Spray System

October 7, 2009

Grand Rapids, MI: UNIST, Inc. introduces an updated enclosure design for their Uni-MAX series of MQL(minimum quantity lubrication) systems. The new design features a modular enclosure with improved aesthetics and better access for maintenance of key components. The enclosure is also now available with a keyed lock to prevent unauthorized tampering with the system settings. Beginning August 2009... Read More


Metal Mates High Strength Steel Lubricants Economical Stamping & Forming Solutions

September 22, 2009

Glenview, IL - September 15, 2009 - Metal Mates' unique line of high strength steel lubricants are specifically engineered for use on advanced high strength steels (AHSS), and difficult drawing, stamping, piercing, and flanging applications. Depending on the severity of forming application and grade and thickness of the steel Metal Mates has three different formulations, Metal Mates VS-HSS and... Read More