Lubricants, Materials & Material Processing, Paints & Coatings

Anti-Seize Lubricant is rated for food contact.

January 20, 2011

Protecting against seizure, heat-freeze, galling, rust, and corrosion, Food Grade Anti-Seize is NSF® Certified H1: Registration No. 143035 for use in food plants and conforms to FDA Regulation 21 CFR 178.3570 for incidental food contact. It has -65 to +1,800°F service rating and is not affected by metal contraction, expansion, or vibration. Non-staining and odorless, this product contains... Read More

Green & Clean, Lubricants

Bio-Based Penetrating Lubricant is recyclable and non-toxic.

January 14, 2011

Supporting uses from cleaning to lubricating, Bio-Blast(TM) is composed of additives and bio-solvents that provide penetrating catalyst that is non-staining to metals. Product works by driving out moisture, providing dielectric insulation in electrical equipment, and removing rust/dirt. Formulated to penetrate into tight areas and prevent corrosion, lubricant performs with capillary wetting... Read More

Adhesives & Sealants, Lubricants, Materials & Material Processing, Paints & Coatings, Portable Tools, Welding Equipment & Supplies

Seton Offers Maintenance and Repair Products to Keep Workplaces Safe and Productive

January 5, 2011

Branford, CT -- Seton, the leading provider of safety, labeling and signage solutions, announces the launch of a new line of Maintenance and Repair Products to help make any workplace clean, attractive, safe and productive. "At Seton, we are committed to being your one-stop source for all the products you need to keep your facility running safely and efficiently. We are proud to introduce... Read More


New Product: Fluorocarbon Gel 865L-MS

January 5, 2011

This new grease is PAO-based and PTFE thickened. It's a medium viscosity grease intended for sliding metal surfaces. The grease is EP fortified and rust inhibited. Some of its benefits include good film strength and low breakaway force. Read More


New Product: Instrument Grease AND-757MS

January 5, 2011

This product is a replacement of a discontinued Anderol product. It's a lithium soap thickened, heavy viscosity, diester grease formulated to adhere to, and prevent the wear of, moving parts. It is recognized as an excellent lubricant and sealant for electrical switch boxes. Read More


NyeClean® & NyeVac®, Now Registered Trademarks

December 31, 2010

Those registered trademarks are two growing product lines of Nye Lubricants, Inc. The NyeClean® line has been developed with its focus on a wide range of general purpose applications in lower vacuum cleanroom environments. In this product line, you will find the broadest range of lubricants developed for motion control applications like bearings, linear guides, and ball screws. Some of the... Read More


New Product: Nye Instrument Grease 733UF

December 30, 2010

This grease is an ultrafiltered version of Nye Instrument Grease 733, a soft, clay thickened, light viscosity, synthetic hydrocarbon grease intended for precision bearing applications. Read More


Lithium Soap-Thickened Grease suits light-duty applications.

December 30, 2010

Using phenylmethyl silicone as base oil, NyoGel® 741A-RED soft grease is intended for light- to moderately loaded bearings and instruments. This red version of 741A has recommended service range of -65 to +200°C, making it suitable for low-temperature applications where little torque is available. Kinematic viscosity values are 27.8 cSt at 100°C and 71.2 cSt at 40°C, and viscosity... Read More

Lubricants, Material Handling & Storage

Colfax Develops MistLock(TM) Bearing and Lubrication Cartridge for Power Plant, Refinery and Petrochemical Cooling Fans

December 23, 2010

Bearing seals oil, excludes contaminants to dramatically reduce maintenance and improve performance RICHMOND, VA - Colfax Corporation (NYSE: CFX), a global leader in fluid-handling solutions for critical applications, announced its Lubrication Systems Company (LSC) business has developed a MistLock(TM) bearing and lubrication cartridge for Air-Cooled Heat Exchangers (ACHEs) used in refineries,... Read More

Cleaning Products & Equipment, Lubricants

IPC Introduces New and Improved Package and Label Design!

December 14, 2010

New and Improved Packaging from International Products Corporation Burlington, New Jersey, USA: International Products Corporation is pleased to announce the introduction of new packaging. In addition to the new design, the bottles will be available in standardized metric sizes worldwide. "It's been years since we've had a major packaging revision," says President, Kathy Wyrofsky. "We think the... Read More

Green & Clean, Lubricants

Dry Film Lubricant serves as assembly aid.

December 8, 2010

Consisting of 15% aqueous dispersion of PTFE, NyeFilm® 501F is applied in wet form, which then dries to surface. Product was developed to have controlled particle size distribution where no particles are greater than 10 microns, allowing for even distribution of PTFE. Environmentally safe, NyeFilm® 501F offers rub and abrasion resistance as well as chemical compatibility with all polymers. Read More


Nye Exhibited at SemiconWest 2010, in San Francisco, CA

December 8, 2010

Nye Lubricants introduced new products from its NyeTorr® and NyeClean® product lines at SemiconWest 2010. The show took place in the Moscone Center in San Francisco from July 13 to July 15. It was the second year in a row that Nye Technical Team exhibits there. This year, we introduced new ultra low outgassing products. Those products have been carefully engineered through the past year,... Read More


New Product: NyeFilm® 530, Fishing Reel Lubrication

December 8, 2010

A 5% dispersion of ester wax in an isoparaffinic solvent. This lubricant provides friction reduction, wear protection and corrosion resistance for salt water conditions.

Lubricant Properties Typical Value Test Method Recommended Service Range (°C) -30 to 250 Color, Appearance Amber Base Oil Kinematic Viscosity 25°C ASTM D-445 Flash Point °C 290 ASTM D-92 Boiling Point 156°C ASTM... Read More


Polyurea Grease prolongs electric motor life.

November 10, 2010

Designed to help electric motor bearings run cooler and last longer, Monolec® Extend EM Grease (1282) increases motor efficiency by decreasing drag. It offers mechanical stability even in high-moisture environments and contains Monolec proprietary wear-reducing additive. Resistant to oxidation, NLGI grade 2 grease protects bearings against rust and corrosion and also resists water spray-off.... Read More

Green & Clean, Lubricants

High-Temperature Lubricant uses organic and inorganic content.

October 27, 2010

Able to be used in temperatures from ambient to 1,000°C, Keralon-B is brushable lubricant/coating/paint based on organic Methylated Seed Oil and inorganic ceramic mixture of chemically-inert lubricating phases: Boron Nitride, Graphite, and Titanium Dioxide. It performs as oily mixture at room temperature and acts as dry film lubricant above 200°C. Solution is nonreactive/nonwetting with... Read More

Lubricants, Machinery & Machining Tools

An Upgrade in QUAKERAL® Coolant Technology Sums up to Increased Savings

September 20, 2010

Demonstrating a proactive approach to continuous improvement, a joint effort was undertaken by Quaker Chemical (NYSE: KWR) and an automotive customer to upgrade the metalworking fluid in a major automotive engine plant to QUAKERAL® 381 SD, a new, more technologically advanced coolant. With the impact of this upgrade, Quaker was able to reduce the customer's processing costs by 25% and improve... Read More

Green & Clean, Lubricants

Water-Based Cable-Pulling Lubricant is 96% biodegradable.

September 16, 2010

Non-toxic, non-bioaccumulative, and chemically inert with low VOCs, Techni-Glide Lubricant contains microscopic poly-spheres that reduce surface contact, enabling smooth cable pulling, even under high sidewall bearing pressures. After drying, there is no sticky residue and product remains slippery. Low aquatic toxicity makes Techni-Glide suitable for marine and port installations as well as any... Read More