Total Lubricants USA, Inc. (formerly Keystone Lubricants)    Linden, NJ 07063
May 24, 2002 PolyPerformance(TM) NLGI Grade 2 grease can be used in temperatures from -10 to +325 deg F, making it suitable for electric motor bearings in steel mills, furnaces, crushers, conveyors, automotive, railroad, and marine equipment applications. It contains inhibitors for rust and oxidation, and resists water and salt water washout, age hardening, throw off, and breakdown. Grease is rated NSF/USDA, H-2 and is available in cartridges, pails, kegs, and drums.

Dow Corning Corp.    Midland, MI 48686 0994
May 08, 2002 Molykote(R) P-37 thread paste anti-seize lubricant is formulated to protect bolts from stress-corrosion cracking at temperatures to 2550 deg F. Mineral-oil-based Molykote(R) P-40 thread paste provides continuous lubrication from -40 to 446 deg F (as dry lubricant up to 2192 deg F). Molykote(R) brand 1000 thread paste provides stable lubrication of threaded fasteners, and prevents bolt seizure resulting from exposure to temperatures from -40 to 2100 deg F.

X-1R Corporation    Daytona Beach, FL 32114
May 02, 2002 X-IR Synthetic Penetrating Spray Lube can be used to loosen rusted bolts and nuts, silence friction-induced squeals and squeaks, and repel dirt, dust, and water. It lubricates electrical components, prevents corrosion and has pleasant citrus aroma. It can also be used for windows, locks, doors and hinges, cable housings, garage doors, and exhaust fans.

Hill & Griffith Co.    Cincinnati, OH 45204
May 01, 2002 GRIFLUBE line includes Premier AW Anti-Wear hydraulic and lubricating oils for heavy-duty hydraulic applications; Premier R&O hydraulic oils for circulating systems such as steam turbines; Gear Oil EP industrial gear lubricants for severe applications with extreme load and shock load conditions; Slide-Way lubricants for slides and ways; Aquatech FR 200 water glycol for diecast and permanent molds; and biodegradable Bio-Syn 68 fire-resistant fluid for foundry applications.

EFD Inc.    East Providence, RI 02914-1342
Apr 30, 2002 MicroCoat(R) lubrication method gives can makers control over amount of oil applied to pull tabs. It lowers lubricant use and reduces residual oil that can migrate from tabs and lids into can contents. It has precision spray valves that use low volume, low pressure (LVLP) air to coat pull tab stock with fine film of oil that keeps dies sharp, eliminates pressroom mist and puddles, and minimizes VOC Levels. Pneumatic controller regulates valve operation.

Dow Corning Corp.    Midland, MI 48686 0994
Apr 25, 2002 Molykote(R) synthetic gear oils include anti-oxidant additives, polyalpha olefin (PAO) oils, PAO blends with ultra-high purity (UHP) mineral oils, and neat UHP mineral oils. They resist emulsification in hot, humid, and wet operating environments. Made by chemically building molecules from hydrocarbon, oils feature identical, strong molecular bonds in saturated molecular structure. Kosher-approved oils are available in pour points down to -31 deg F.

Quaker Chemical Corporation    Conshohocken, PA 19428
Apr 19, 2002 QUINTOLUBRIC 814-01 semi-synthetic micro-emulsion is designed for use in longwall roof support equipment. It controls size of lubricant modules within water-based formulation, allowing for consistent delivery of lubrication to pumps and valves throughout hydraulic application. QUINTOLUBRIC 814-01 is approved for use by major global equipment builders.

Oak International, Inc.    Sturgis, MI 49091
Apr 03, 2002 Signature line includes: OAKFLO(TM) fluids for machine tools and metalworking; OAKFORM(TM) stamping and drawing fluids for metalforming applications; OAKWASH(TM) aqueous cleaners for in-line spray washers, vibratory and deburring systems, and general maintenance cleaners; OAKTEC(TM) corrosion inhibitors, available in solvents, oil, and synthetics; and OAKSPEC(TM) specialty fluids and lubricants.

Valvoline Co., The, A Div. Of Ashland, Inc.    Lexington, KY 40509
Mar 14, 2002 Premium Blue(R) Extreme meets all requirements for API CI-4 performance classification, as well as Cummins CES 20078. It offers extended drain intervals up to 100,000 miles, in select engines under certain operating conditions. Dispersive polymer technology (DPT) disperses individual soot particles, and helps to manage heat transfer and added stress levels in EGR engines. Oil provides fuel economy savings when compared to company’s conventional oils.

Dow Corning Corp.    Midland, MI 48686 0994
Mar 14, 2002 Molykote(R) industrial fluids are made of synthetic fluids and ultra-high purity mineral oils that reduce lubricant consumption, permitting longer drain intervals and extending equipment life. Additives reduce oxidation rates due to elevated pressures and temperatures that can cause premature lubricant breakdown. Fluids are resistant to oxidation and emulsion.

Milacron Inc.    Cincinnati, OH 45206
Mar 12, 2002 CIMSTAR(R) 3800 family of fluids for aluminum machining and grinding also work with titanium, exotic alloys and ferrous and non-ferrous alloys. Fluid has lubricity and biostability, is low misting and low foaming, and provides cleanliness and bimetallic corrosion control for parts, individual machines and central plant systems.

X-1R Corporation    Daytona Beach, FL 32114
Mar 08, 2002 X-1R Synthetic Air Tool Lube is scientifically designed to stop moisture build up and corrosion, while providing wear protection and lubricity. Synthetic lubricant's detergent package cleans and dissolves sludge and grime that builds up over time lessening air tool performance.

Lincoln    St. Louis, MO 63120 1578
Mar 06, 2002 Models 205 and 215 Multiline Pumps have high operating pressures and may be used as central pump in medium to large progressive systems. Both work in temperatures from -48 to 176 deg F, pump oil or grease up to NLGI #3, and have optional ultrasonic level control. Pumps include housing with motor, reservoir with stirring paddle, and pump element. Model 205 is available with 1-5 pump elements, while 215 has 1-15 pump elements.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Mar 05, 2002 Food Grade FG Series Premium Plus fully-synthetic fluids are formulated for use in food processing and pharmaceutical manufacturing plants. Each has additive package that keeps air compressors and rotary lobe blowers running reliably and efficiently. Fluids are non-toxic, compatible with other food grade lubricants, USDA H-1 approved, NSF listed, and available for Kaeser Sigma screw compressors, piston compressors and Omega blowers.

International Products Corp.    Burlington, NJ 08016
Feb 27, 2002 P-80(R) THIX temporary rubber lubricant remains where it is applied without dripping, puddling or running. Thixotropic gel is designed to lubricate rubber parts in overhead assembly lines or those which are aligned vertically to floor. P-80(R) THIX is non-toxic, non-flammable, and free of VOCs. It contains no carcinogenic or mutagenic ingredients, and has near-neutral pH (7.5-9.0).

EFD Inc.    East Providence, RI 02914-1342
Feb 12, 2002 MicroCoat uses low volume low pressure (LVLP) air to apply lubricant as fine film to reduce oil consumption by as much 70%. Compact, low-maintenance spray valves fit in tight press areas, and can be mounted in any position above or below stock. Valves coat every square in. of metal with fine, consistent film of oil, eliminating mist, dripping, or waste. System offers individual flow controls for up to 4 valves.

Transor Filter U S A    Elk Grove Village, IL 60007
Feb 05, 2002 TransoGrind EXP sythetic fluid is comprised of identically bonded molecules offering thermal stability and virtually unlimited life in properly filtered grinding operations. Odor free and bright yellow in color, oil is proven to have no effect on hoses, seals and windows. TransoGrind EXP is extremely effective in dissipation of heat, making it suitable for applications with heavy stock removal.

Dylon Industries, Inc.    Cleveland, OH 44144 1045
Feb 01, 2002 Grade FW-3301 water-based forging lubricant contains micro-fine graphite and EP additives. It is designed to forge difficult, warm or hot ferrous, non-ferrous and super alloy metals. Lubricant can be used to wet dies with temperatures from 250 to 1000°F. It provides outstanding metal movement and anti-solder properties for demanding forging operations. FW-3301 dilutes with water and can be spray applied to dies for uniform coating.

Diversified Brands    Cleveland, OH 44115
Jan 23, 2002 Tri-Flow(R) Food Grade Grease and Oil will not emulsify in dead-water washout. Non-staining grease, with pure synthetic base, withstands temperatures from -10 to +400°F. It prevents friction and wear on any metal-to-metal contact, and is compatible with most rubbers and plastics. Synthetic oil is fortified with Teflon(R) for increased lubricity. Low-foaming characteristics make it suitable for hydraulic systems.

ITW Fluid Products Group    Glenview, IL 60025
Jan 02, 2002 Accu-Lube® PowerStamp III medium viscosity, natural base oil is used in stamping of metals; drawing, drilling, and tapping of hard-to-machine metals; machining operations that generate heat; and sawing large diameter solids. Non-chlorinated EP package is suited for stamping with carbide dies, machining titanium, heavy-duty machining of aluminum, as well as all ferrous metals. PowerStamp III is available in 1 gal and 55 gal containers.