Henkel Loctite Corporation
Rocky Hill, CT 06067
Oct 17, 2002 Formulated for use in long-life industrial and severe-duty applications, ViperLube(TM) lubricants are composed of synthetic PAO (polyalphaolefin) base stocks. They offer mechanical and thermal stability; high load carrying capability; and resistance to rust, corrosion, and water. Lubricants consists of NLGI Grade 2/Severe Duty GC-LB Grease, 90w Gear Oil, and 10w Lightweight Oil, all of which are NSF HI rated for incidental food contact.

Exxon Mobil Corp.
Irving, TX 75039 2298
Oct 16, 2002 Mobil Pegasus 905 offers extended drain capability and wear protection without sacrificing cleanliness. It reduces heat exchanger deposits in natural gas gathering, transmission, cogeneration, and combined heat and power applications. Oil consists of additive system with heavy, neutral basestocks and exhibits antioxidant characteristics, viscosity control, and thermal stability.

DuPont Coating & Release Systems
Wilmington, DE 19880-0023
Oct 14, 2002 Krytox® FG products, approved for H-1 food processing applications, perform at operating temperatures from -70 to +762°F (continuous use), are insoluble in water, and resist any water washout. Rust and corrosion resistant, they are also non-flammable and chemically inert. Compatible with all metals, elastomers, and plastics, products do not carbonize. Oils are clear, non-staining, and non-migrating. Greases are clean, pure white, and non-migrating.

Barden Corp., The
Danbury, CT 06813
Sep 30, 2002 Type G-75 grease is designed for high speed machine tool spindle bearings. It combines fully synthetic base oil with Polyurea thickener instead of barium complex soap thickener. G-75 operates at 1.5 M dN continously and is standard on all sealed angular contact bearings. It is available in 30 cc dispenser.

Sprayon Diversified Brands
Cleveland, OH 44115
Sep 11, 2002 Sprayon® Liqui-Sol™ MRO lubricants, cleaners, and maintenance products offer re-useable, adjustable spray triggers. Triggers allow users to dial in specified coverage, from fan spray to pin stream. To recylce/dispose of containers, users remove (and reuse) spray trigger and recycle empty can as scrap metal or dispose of it as non-hazardous waste. Sprayon Liqui-Sol containers come in 14 or 18 oz cans and include food-grade items.

Batson, Louis P., Inc.
Greenville, SC 29608
Aug 28, 2002 ShuR-BusT penetrant, lubricant, and demoisturant immediately cuts through dirt, rust and scale to get into parts that have been frozen by or encrusted with corrosion and oxidation. It leaves protective shield-like film, and seals out water to prevent moisture and corrosion. ShuR-BusT will not ignite and will not dry or harden. It penetrates through water when sprayed on boat motors and submerged parts.

Castrol Industrial North America Inc.
Downers Grove, IL 60515
Aug 16, 2002 Molub-Alloy® 6040 greases are formulated with petroleum base oils using calcium-complex sulfonate thickener. They are compounded with additives for extreme pressure characteristics and thin-film, high-pressure, antiwear protection. Greases resist corrosion, making them suitable for aggressive process water environments. Resistance to oxidation allows them to remain pliable and prevents corrosive activity toward bearings and other lubricated components.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
Jul 30, 2002 Nevastane® formulas include lube, hydraulic, and compressor oils offered in synthetic, semi-synthetic, mineral base, emulsifiable, semi-fluid, grease, and spray formulations. Used to lubricate or to act as anti-rust film on equipment and machine parts, all formulas are NSF and USDA registered H-1 for incidental contact with food. Also available: Wet Lube 100 emulsifiable lubricant, Nevastane Flush Oil, and Nevastane 6 multi-purpose, white food machinery oil.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 10, 2002 Marine Grade Anti-Seize Lubricant protects assemblies exposed to high humidity conditions or direct contact with fresh or salt water. It reduces wear and protects against galling and corrosion in high-pressure applications, and resists wash-out from water spray. Lubricant is ideal for variety of fasteners and joints, or as dressing for water pump gaskets and flanges in marine and other applications that require submerging.

Dow Corning Corp.
Midland, MI 48686 0994
Jun 24, 2002 Molykote® Compressor and Vacuum Pump Fluids are comprised of formulations of synthetic polyalpha olefin (PAO), polyalkylene glycol/polyolester (PAG/POE), polyolester (POE), diester (DE), and ultra high-purity mineral oils. Their engineered chemistry makes them resistant to oxidation and emulsification. Molykote oils are available in pour points down to -80°F, with range of viscosity grades from 32 to 100 ISO, and service life up to 10,000 hours.

Spraymation, Inc.
Fort Lauderdale, FL 33309-6314
Jun 04, 2002 Electromatic XVI Mid Size Applicator Head operates at pressures up to 2,000 psi, and typically fires above 1800 cycles per minute. Internal 24 Vdc or 120 Vdc solenoid coil eliminates need for additional valves, and may be operated by PLC. All wetted parts are stainless steel, with only one moving part and no seals or packings to wear. Applicator head is intended for use with cold adhesives, coatings, silicones, marking inks, water, and lubricants.

Kano Laboratories, Inc.
Nashville, TN 37210
May 30, 2002 Kroil chemical lubricant can creep into millionth in. spaces, dissolving grease and carbon, breaking bonds of rust, and supplying necessary lubrication to loosen frozen metal parts. It is available in 1, 5, 15, and 55 gal sizes. Aerokroil aerosol version offers same lubricating powers and is available in 10 and 13 oz cans.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
May 24, 2002 PolyPerformance(TM) NLGI Grade 2 grease can be used in temperatures from -10 to +325 deg F, making it suitable for electric motor bearings in steel mills, furnaces, crushers, conveyors, automotive, railroad, and marine equipment applications. It contains inhibitors for rust and oxidation, and resists water and salt water washout, age hardening, throw off, and breakdown. Grease is rated NSF/USDA, H-2 and is available in cartridges, pails, kegs, and drums.

Dow Corning Corp.
Midland, MI 48686 0994
May 08, 2002 Molykote(R) P-37 thread paste anti-seize lubricant is formulated to protect bolts from stress-corrosion cracking at temperatures to 2550 deg F. Mineral-oil-based Molykote(R) P-40 thread paste provides continuous lubrication from -40 to 446 deg F (as dry lubricant up to 2192 deg F). Molykote(R) brand 1000 thread paste provides stable lubrication of threaded fasteners, and prevents bolt seizure resulting from exposure to temperatures from -40 to 2100 deg F.

X-1R Corporation
Daytona Beach, FL 32114
May 02, 2002 X-IR Synthetic Penetrating Spray Lube can be used to loosen rusted bolts and nuts, silence friction-induced squeals and squeaks, and repel dirt, dust, and water. It lubricates electrical components, prevents corrosion and has pleasant citrus aroma. It can also be used for windows, locks, doors and hinges, cable housings, garage doors, and exhaust fans.

Hill & Griffith Co.
Cincinnati, OH 45204
May 01, 2002 GRIFLUBE line includes Premier AW Anti-Wear hydraulic and lubricating oils for heavy-duty hydraulic applications; Premier R&O hydraulic oils for circulating systems such as steam turbines; Gear Oil EP industrial gear lubricants for severe applications with extreme load and shock load conditions; Slide-Way lubricants for slides and ways; Aquatech FR 200 water glycol for diecast and permanent molds; and biodegradable Bio-Syn 68 fire-resistant fluid for foundry applications.

EFD Inc.
East Providence, RI 02914-1342
Apr 30, 2002 MicroCoat(R) lubrication method gives can makers control over amount of oil applied to pull tabs. It lowers lubricant use and reduces residual oil that can migrate from tabs and lids into can contents. It has precision spray valves that use low volume, low pressure (LVLP) air to coat pull tab stock with fine film of oil that keeps dies sharp, eliminates pressroom mist and puddles, and minimizes VOC Levels. Pneumatic controller regulates valve operation.

Dow Corning Corp.
Midland, MI 48686 0994
Apr 25, 2002 Molykote(R) synthetic gear oils include anti-oxidant additives, polyalpha olefin (PAO) oils, PAO blends with ultra-high purity (UHP) mineral oils, and neat UHP mineral oils. They resist emulsification in hot, humid, and wet operating environments. Made by chemically building molecules from hydrocarbon, oils feature identical, strong molecular bonds in saturated molecular structure. Kosher-approved oils are available in pour points down to -31 deg F.

Quaker Chemical Corporation
Conshohocken, PA 19428
Apr 19, 2002 QUINTOLUBRIC 814-01 semi-synthetic micro-emulsion is designed for use in longwall roof support equipment. It controls size of lubricant modules within water-based formulation, allowing for consistent delivery of lubrication to pumps and valves throughout hydraulic application. QUINTOLUBRIC 814-01 is approved for use by major global equipment builders.

Oak International, Inc.
Sturgis, MI 49091
Apr 03, 2002 Signature line includes: OAKFLO(TM) fluids for machine tools and metalworking; OAKFORM(TM) stamping and drawing fluids for metalforming applications; OAKWASH(TM) aqueous cleaners for in-line spray washers, vibratory and deburring systems, and general maintenance cleaners; OAKTEC(TM) corrosion inhibitors, available in solvents, oil, and synthetics; and OAKSPEC(TM) specialty fluids and lubricants.