Lubricants

Lubricants, Material Handling & Storage, Materials & Material Processing, Mechanical Power Transmission

Aerosol Lubricants feature 2-way integrated actuator.

Sep 12, 2014

Placed on all CRC NSF H1 aerosol lubricant products, Perma-Lock™ 2-Way Integrated Actuator will not detach and has no-slip grip. Flip straw locks into place, eliminating lost straws. Actuator delivers wide spray with straw in down position and precision spray with straw in up position. In addition, cans are labeled for OSHA GHS requirements as well as CPSC Retail requirements. Read More

Lubricants

Plunger Lubricants and Robotic Greases suit die casting uses.

Sep 09, 2014

Formulated for aluminum die casting operations, PLUNGER SLICK™ 200T and PLUNGER SLICK™ WB10-T provide optimized boundary protection for plunger tips and shot sleeves. Key benefits include strong adherence to plunger tip, extended tip and sleeve life, and clean and bright castings. Featuring semi-fluid consistency, QUAKERTEK™ AXIAL 00-32 and QUAKERTEK™ LS 032B-EP are lithium type greases... Read More

Lubricants

Foam Wire Pulling Lubricant has drip-free, non-staining formula.

Sep 08, 2014

Offering alternative to gel or wax lubricants, Foam Wire Pulling Lubricant (Cat No. 51100) is applied by user directly into conduit and then fills conduit and coats wires as they are pulled through. Formula stays where applied and won’t drip out even if it is used in vertical conduit. Supplied in 19 oz can, product wipes away clean and will not leave stains on hands, clothing, or carpet. Read More

Green & Clean, Lubricants, Machinery & Machining Tools

ELM Inc Earns USDA Certified Biobased Product Label

Sep 05, 2014

GRUNDY CENTER, IA – ELM Inc announced it has earned the USDA (United States Department of Agriculture) Certified Biobased Product Label for ten products. The USDA Certified Biobased Product Label verifies that the products' amount of renewable biobased ingredients meets or exceeds levels set by USDA. Biobased products are finished or intermediate materials composed in whole or in... Read More

Fasteners & Hardware, Fluid & Gas Flow Equipment, Lubricants, Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products

CNC Maintenance Special

Sep 05, 2014

CNC Maintenance Special - http://www.technocnc.com/eblasts/14-fall.htm Just like your car, your CNC Router needs a tune up, too! Did you know, worn or improperly fitted tool holders and collets can cause premature spindle wear and cut problems? Change out your tooling today and save 5%, plus FREE Shipping! Email or call today to take... Read More

Lubricants

Metal Removal Fluids promote resource efficiency.

Aug 29, 2014

QUAKERCOOL® 700 Series mineral oil-free micro-emulsions suit exotic machining and grinding operations on titanium alloy, compacted graphite iron, stainless steels, and high nickel-chrome alloys. Properties extend tool life, impart short-term corrosion protection, and minimize vapor pressure technology. Offering approach to coolants and cleaners, eco-efficient 2PAQ™ technology is designed... Read More

Lubricants

Cutting/Machining Lubricants increase performance, productivity.

Aug 13, 2014

CIMTECH 300 and 600 series are available with InSol™ lubrication technology, which features surfactants and inhibitors and provides multi-metal performance without use of extreme pressure additives. Increasing productivity, lubrication technology is compatible with machining and grinding operations. It puts near 100% of lubricant at cut zone-tooling interface to optimize lubricant and cooling.... Read More

Lubricants

Loctite® Anti-Seize Lubricants from Henkel Receive MIL-PRF-907F Qualification

Jul 18, 2014

Loctite® C5-A® and Loctite® Silver Grade Prevent Seizing, Galling and Corrosion on Metals Rocky Hill, Conn.  - The Department of the Navy (Naval Sea Systems Command) recently granted MIL-PRF-907F qualification status to two anti-seize products from Henkel Corporation. Formulated to prevent seizing, galling and corrosion on metals, Loctite® C5-A® Copper-Based Anti-Seize and... Read More

Lubricants

Working with Rubber in Manufacturing Operations

Jun 30, 2014

Rubber, both natural and synthetic, is a core material in the automotive manufacturing industry. Its inherent qualities make it the number one choice for mountings, bumpers, seals, protective boots, belts, bushings, o-rings and hoses, to name just a few. Unfortunately, rubber's non-slip surface often makes the installation, removal and general manipulation of rubber components a difficult task.... Read More

Lubricants, Machinery & Machining Tools

QualiChem to Showcase Premium Foam-Free High-Pressure Metalworking Fluids at IMTS 2014

Jun 23, 2014

SALEM, Va. – QualiChem will feature its premium cutting and grinding fluids for high-pressure applications at IMTS 2014, in Chicago, Sept. 8-13. QualiChem’s XTREME series of premium metalworking fluids have been formulated to overcome the problems that often occur with high-pressure fluid delivery systems. These fluids are designed to: Eliminate foaming Minimize downtime and maximize... Read More

Lubricants, Materials & Material Processing

P-80 Lubricants - Two Year Shelf Life!

Jun 20, 2014

We are pleased to inform you that all sizes of P-80 lubricants, except P-80 RediLube, now have a two-year shelf life.  This change is based on in-house stability testing conducted by our VP of Research, Quality & Safety. The new shelf life applies to the following lubricants: 1.    P-80 Rubber Lubricant Emulsion 2.    P-80 THIX Rubber Lubricant Gel 3.    P-80 Grip-It... Read More

Lubricants

New Range of Forging Lubricant CONDAFORGE

Jun 11, 2014

• Graphite lubricants for hot and warm forging of steel • Non ferrous forging lubricants • Glass coatings for aeronautic forging of Titanium, Inconel etc… • Graphite free lubricants for hot forging CONDAT's forging lubricant line has been developed and formulated to improve surface finish, die life and reduce the total cost of lubrication. The main force of CONDAT team is its customer's... Read More

Lubricants, Material Handling & Storage, Materials & Material Processing

Boron Nitride Aerosol utilizes non-flammable solvent.

Jun 09, 2014

Applied at room temperature, Boron Nitride Aerosol Lubricoat®-NF is based on Necosolv™ non-flammable solvent system with green Solstice™ HFO-1234-ze propellant. Once dry to touch, product can be used from cryogenic temperatures up to 1,000°C in air, 1,400°C in vacuum, and 1,800°C in inert/nitrogen atmospheres. Product provides non-stick release, is electrically insulating and... Read More

Lubricants, Materials & Material Processing

Introducing Two New Technologies at AISTech 2014

May 05, 2014

Quaker expands its portfolio with Water Glycol Hydraulic Fluids and Greases CONSHOHOCKEN, Pa. - Quaker Chemical Corporation (NYSE:KWR) develops products that help customers adjust to the latest industry challenges and bring value to their processes. Quaker has expanded its product offering in the Steel industry with the addition of QUINTOLUBRIC® 702-46 RD Water Glycol Hydraulic Fluid to its... Read More

Lubricants, Machinery & Machining Tools

Disc Brake Wheel Bearing Grease meets severe duty requirements.

May 01, 2014

Supplied in 1 lb tub, Champion Disc Brake Wheel Bearing Grease (Part No. 4149I) consists of Lithium complex base grease formulated with refined base oil and additives. Appearance is smooth, somewhat tacky, slightly stringy, and blue. While capable of operations from -40 to +350°F, grease has dropping high point of >500°F. Other characteristics include mechanical stability, oxidation and... Read More

Green & Clean, Lubricants

Synthetic Motor Oil are made from natural gas.

Apr 29, 2014

Pennzoil Platinum® and Pennzoil Ultra Platinum™ with PurePlus™ Technology are full synthetic motor oils formulated from natural gas. Both provide Complete Protection – cleanliness, fuel economy, horsepower conservation, wear protection, and performance in extreme temperatures – for engines. PurePlus Technology is responsible for converting pure natural gas into full synthetic base... Read More

Laboratory and Research Supplies and Equipment, Lubricants

P-80 Grip-It Quick-Dry Assembly Aid

Apr 29, 2014

P80 Grip-itP-80 Grip-it is a truly unique multifunctional product designed specifically for the assembly of rubber articles. Not only does P-80 Grip-it have impressive lubrication, it provides adhesiveness for the mated parts. P-80 Grip-it delivers those benefits using a proprietary, water-based technology that further offers excellent rubber compatibility, ease of use, and no danger to... Read More

Green & Clean, Lubricants, Materials & Material Processing, Mechanical Power Transmission, Transportation Industry Products

Champion GlobalTrans® ATF Fluid Recommended for ZF Eight and Nine Speed Transmissions

Apr 28, 2014

Clinton, MO – Champion Oil, a globally recognized industry leader in performance lubricants, additives, chemicals and motor oils for over 58 years, announced today that the Champion Synthetic GlobalTrans® ATF Fluid meets or exceeds the specifications for ZF 8 and 9 Speed Transmissions. The ZF 8-speed automatic transmission is designed and built by ZF Friedrichshafen AG. It had its debut... Read More

Lubricants, Machinery & Machining Tools, Materials & Material Processing, Paints & Coatings

Quaker to Exhibit Their "Front-to-Back" Solutions for the Tube & Pipe Industry at Tube Dusseldorf 2014

Apr 08, 2014

CONSHOHOCKEN, PA – Quaker Chemical Corporation (KWR), the only chemical specialty supplier to the Tube and Pipe industry to offer system-wide expertise, as well as a comprehensive portfolio of processing fluids and coatings, will exhibit at Tube 2014 on April 7 – 11 in Düsseldorf, Germany. Quaker will be in Hall 5, Stand E26, to showcase their "front-to-back" approach for integrated fluid... Read More

Lubricants, Machinery & Machining Tools

BTM Corporation Reduces Coolant Usage and Waste Removal Costs by 50 Percent with QualiChem Semi-Synthetic Fluids

Mar 31, 2014

Michigan Manufacturer Switches All of Its Metalworking Fluids to QualiChem XTREME CUT 251C Following Results of Comparative Trials SALEM, Va. -- BTM Corporation, a Michigan-based manufacturer of clinch joining systems, automation components and contract machine work, has reported substantial savings in coolant usage and waste removal costs after switching its aluminum and steel machining... Read More