Mosaic Industries    Newark, CA 94560
Apr 26, 2004 Mounted directly on QCardâ„¢ SBC, 2 x 2.5 in. Keypad/Display Wildcardâ„¢ provides interface with 4 x 20 character display and 4 x 5 keypad. Ribbon cable interface enables custom placement of keypad and display in instrument, and field header brings out 4 nibble-wise programmable I/O lines and 4 input lines. Product is suited for hand-held or space-constrained applications that require programmable embedded computer and smart user interface.

Aremco Products, Inc.    Valley Cottage, NY 10989
Apr 26, 2004 Machinable, Aremcoloxâ„¢ 502-400 produces thermally insulative and high dielectric components and fixtures used in electrical and electronics applications. It offers compressive and flexural strengths of 40,000 and 15,000 psi, respectively, dielectric strength of 400 V/mil, and thermal conductivity of 2.88 Btu-in/hr-ft²-°F. Product comes in rods from ¼â€“1 in. diameter x 18 in. long and plates from 1/8–1 in. thick x 14 x 20 in.

Greenheck Fan Corp.    Schofield, WI 54476 0410
Apr 26, 2004 Series BISW eliminates need for belts and pulleys because motor is directly connected to impeller or fan shaft via coupling. Suited for heavy-duty air movement, fans come with partial wheel widths to adjust fan performance. All direct-drive units are licensed to bear AMCA label for sound and air.

Ruesch Machinery Co.    Kenilworth, NJ 07033
Apr 26, 2004 Strip-Turn-Ender allows operator to remove heavy coils, reposition, and off load with minimal effort. User secures coil with hand tightening knobs to Strip-Turn-Ender from turnstile or winder. Coil is down-ended from vertical to horizontal position. Overhead crane can be used to position Strip-Turn-Ender for unloading.

KMT Water Jet Systems, Inc.    Baxter Springs, KS 66713
Apr 26, 2004 SL-V Plus utilizes Hyperlife? plunger seal and ceramic plunger technology. Hard seal end cap design provides ease of maintenance and increased life cycles when compared to O-ring seals. Kits are available to upgrade existing SL-I, SL-II, and SL-IV intensifier units.

Baker Co., The    Sanford, ME 04073
Apr 26, 2004 Upgraded SterilGARD® III Advance° Class II, Type A2 cabinet features plenum technology that offers quieter performance and extended HEPA filter life. Eye-level controls face the operator for easier access. Horizontal blower/motor with multi-voltage speed controller maintains velocity and provides uniform airflow to filter. Internal balancing damper reduces exhaust velocity by 75%. Cabinet is 2 in. deeper, creating up to 170 in.² additional work area.

PumpSmart Control Solutions - Division of ITT Industries, Inc.    Seneca Falls, NY 13148
Apr 26, 2004 PumpSmart PF 700 incorporates Vector Control with Allen-Bradley Force Technology for low-speed power and performance, previously available from DC drives. Drive regulates motor speed to accuracy of 0.001% and holds full torque at zero speed. Available ratings are from 0.37-110 kW and voltage ratings from 230-600 V. Zero Stacking saves panel space by mounting drives side-by-side. Built-in brake eliminates need for external choppers and dynamic braking modules.

Tennessee Mat Co., Inc.    Nashville, TN 37210-4123
Apr 26, 2004 Diamond-Plate with GritWorks!® increases traction by 50% in dry areas where oil and grease are tracked from department to department or where over-spray is present. Professional grade carbide grit increases chemical and abrasion resistance of mat. Nitricellâ„¢ sponge base is PVC loaded with Nitrile rubber for comfort and rebound.

Drake Mfg. Services    Warren, OH 44485 1147
Apr 26, 2004 Model GS:I-V Vertical 3-Axis Bore Grinder minimizes floor space with 48 x 72 in. footprint. Unit comes with rotary diamond contour dresser, Smart-Spindleâ„¢ acoustic touch dress monitoring system, CNC taper correction, and Fanuc CNC control. Precision-balanced high frequency spindles are available from 30,000-90,000 rpm. Standard configuration allows max part diameter of 10 in. and max part length of 4 in.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Apr 26, 2004 DuraLiteâ„¢ offers 810 nm, 50 W bar housed in environmentally sealed and lensed conduction-cooled package, suitable for integration into graphic arts and direct-diode materials processing applications. Device features several die attach enhancements and typical drive current and compliance voltage for device is <63 A and <1.8 V, respectively. Spectral width is <4.0 nm, FWHM. Fast axis collimates to <5 mrad FWHM, with near-diffraction-limited side lobe performance.

Copley Controls Corp.    Canton, MA 02021
Apr 26, 2004 ServoTube actuator makes positioning subsystem for stacking, cutting, pressing, coating, filling, picking, and placing. It requires 50/60 Hz AC power, eliminating need for pneumatic or hydraulic lines. External multi-position thumbwheel switch can call up Xenus' stored motion profile. Continuous force ranges from 51-104 N and peak force is 662 N. Actuator attains 527 m/s² acceleration and 6 m/s velocity.

Porter-Cable Corp.    Jackson, TN 38302
Apr 26, 2004 Series 7430K and 7416K 4½ in. angle grinders have spanner wrench on handle that facilitates changing pad, blade, disc, or other accessory during use. Operating at 10,000 rpm and incorporating 3-position auxiliary handle and case, 7430K provides 8 A power with paddle switch and 7416K provides 6 A power with slide switch. They suit sharpening, cutting, sanding, stripping, and grinding applications in construction, masonry, and automotive sectors.

DIRAK    Chantilly, VA 20151-1220
Apr 26, 2004 L-Handle offers cylinder barrel (key) or slotted insert (tool) access mechanism as well as padlock, and accommodates single- or multi-point latching. Tool-operated model features defeater that allows automatic closure of handle, eliminating need for secondary latching operation. Handle seals against dust and water penetration, making it suited for indoor/outdoor applications which require IP-65 rating.

FieldCentrix Inc.    Irvine, CA 92614
Apr 26, 2004 Intended for field service workers using PDAs, handhelds, laptops, and desktop PCs, FX Mobile couples field service automation software with pen-based laptop. It captures customer information while creating seamless wireless or direct connect communication between workers and office. Software provides real-time work orders; automated workflow; equipment and site history; customer, SLA, and entitlement information; parts inventory; e-mail messaging; and signature capture.

Cotronics Corp.    Brooklyn, NY 11232
Apr 26, 2004 Based on cross-linked, inorganic-organic polymer system, Duralco(TM) 4701 consists of single-component adhesive and casting compound that requires no mixing or measuring. It may be used in temperatures to 600°F, adhering to metals, glass, ceramics, and plastics. VOC- and solvent-free material exhibits chemical, solvent and radiation resistance in addition to temperature stability. Product cures to 90 Shore D hardness with 11,100 psi tensile strength.

Space-Ray    Charlotte, NC 28236
Apr 26, 2004 Available in 19 sizes with capacities from 40,000-250,000 BTU/hr, LTU unitized, gas-fired radiant U-tube heaters are offered in natural and propane gas versions. Total heater length varies from 17-27.5 ft, and units incorporate self-contained draft inducer; one-piece cast-iron burner; pre-assembled tube and reflector body with 6-bolt aluminized steel burner box assembly; and monitoring lights for on-line diagnosis.

Grieve Corporation, The    Round Lake, IL 60073-2898
Apr 23, 2004 Suited for curing Teflon®, No. 927 is a 750°F oven with Incoloy sheathed tubular heating elements that provide 64 kW. Two hp recirculating blower delivers 3,300 cfm horizontal airflow to load. With workspace dimensions of 50 x 50 x 50 in., oven includes 2 stainless steel, high-temperature, HEPA recirculating air filters and one HEPA fresh air filter with 2 in. prefilter. Exterior is aluminized steel and interior is Type 304, 2B stainless steel.

Renesas Technology America, Inc.    San Jose, CA 95134-1368
Apr 23, 2004 Housed in QFN 56-pin package, R2J20601NP Driver-MOSFET Integrated SiP (system in package) integrates driver IC and 2 power MOSFETs with high- and low-side functions. It achieves efficiency of 87% max at 1 MHz operation and is suitable for voltage regulators that manage switching operation of CPUs used in PCs and servers. Conforming to DrMOS specification, product measures 8 x 8 x 0.8 mm, allowing for reduction in size of voltage regulator.

Athena Controls, Inc.    Plymouth Meeting, PA 19462 1129
Apr 23, 2004 Tudor(TM) sensors include Tu-Pak® Thermocouple Sensors and Vacuum Furnace Thermocouple line. Duratherm IV® thermocouples offer vacuum tight seals and threaded process connections, while Series 9000 Noble Metal Thermocouple assemblies measure temperatures to 3,200°F. Series R102 Temperature Transmitter/RTD measures resistance changes as function of temperature. Resistance Temperature Detectors include Series R500 connector type, Series R100 head type, and Series R600 wire type.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Apr 23, 2004 Compressed Air Filters feature housings with large flow areas to ensure low pressure drop. Filter element is manufactured using matrix blended fiber that causes consistent pore size within media. A 96+% void space minimizes pressure drop, while maintaining high capture rates and filtration efficiencies across range of flows from 20–21,250 scfm.