Danfoss VLT Drives    Loves Park, IL 61111
May 04, 2004 Models VLT 4152 and VLT 4352 are modular, 110-250 kW/150-350 hp units with NEMA12/IP54 rating. They include built-in RFI performance to EN 55011 class B. Power termination design facilitates installation, accepting single box lug or dual cable legs. Logic routing includes tie-down provisions to protect against noise disturbance. Ambient temperature ratings are 40-45°C in VT mode, and 50°C with changes in switching pattern.

Empire Magnetics, Inc.    Rohnert Park, CA 94927 1908
May 04, 2004 Commercial-grade, VC Series Motors survive pressures as low as 10^-6 torr and are available as stepper, hollow-shaft, brushless servo, or rotor nut motors. They are temperature-rated at 130°C internal, and 105°C for case. Bearing lubricant vapor pressure is below 10^-6 torr at 100°C. Applications include metal casting, assemblies welding, and forming operations where motion components are incorporated into molds.

Danaher Motion/Kollmorgen    Radford, VA 24141
May 04, 2004 Model S200/AKM, comprised of Kollmorgen S200 servo drive and AKM servomotor, features SMARTFeedbackDevice that allows one connector and cable to provide system power and feedback. Its 800 Hz velocity loop bandwidth eliminates servo loop tuning, while 24-bit resolution feedback and 3–5 kHz current loop bandwidth provide smooth motion and rapid start and stop action. Motors, potted and IP65 sealed, are wound with non-overlapping coils.

Mate Precision Tooling    Anoka, MN 55303
May 04, 2004 NEXT Insert Tooling System for Trumpf presses features interchangeable, abrasion- and adhesion-resistant punch inserts that install into insert punch holders. Holders combine functions of punch shank and alignment ring into single assembly. Punch inserts with diagonal dimensions from 0.036-1.181 in. are M4 high-speed steel, while inserts with diagonal dimensions over 1.181 in. are M2 high-speed steel. Push-on urethane strippers provide positive on-the-die stripping.

LEDtronics, Inc.    Torrance, CA 90505
May 04, 2004 Series BL630 and BXL630 have 15 mm single-contact bayonet base, draw 2.4 W, and feature 30 incandescent white LEDs. Series BL630 is 2.58 in. long, while Series BXL630 is 3.58 in. long. Both are rated 12/14 Vdc standard, with other voltages available as special order. Integrated current-limited resistors prevent short-circuiting. Suited for elevator cabs, cabinets, and recessed lighting applications, LED lamps offer average life span of 100,000 hours.

Veritas Corp.    Mountain View, CA 94043
May 04, 2004 OpForceâ„¢ v3.2 facilitates deployment of servers in heterogeneous environments. Users can provision bare metal and blade servers running on both major Linux platforms, including support for Intel 64-bit Itanium processor-based servers. Pre-deployment feature allows IT staff to associate server profile with specific slots on blade server chassis; when blade server is inserted into slot, it is automatically provisioned with appropriate OS and applications.

LATTICE3D    Los Altos, CA 94022
May 04, 2004 Lattice3D Studio, Notebook, and Web Master enable users to manipulate, collaborate, and publish large (100 MB to 10 GB) 3D designs. Solutions use XVL 6.0 technology to compress file sizes without loss of detail and data as well as create interactive 3D documents directly from CAD drawings. Features include auto-update links, integration with Studio authoring capabilities, and memory handling capabilities that make 3D models accessible on laptops and desktops.

Prosilica Inc.    Burnaby V5J 5E9  Canada
May 04, 2004 FireWire-based, Model CV1280F includes fiber-optic interface that provides cable lengths up to 500 m. DCAM 1.3-compliant unit is suited for security installations, traffic monitoring, and applications requiring intrinsic resistance to EMI interference. It is also useful in robotic applications since fiber optic cable can undergo repeated flexing without failure.

Huntingdon Fusion Techniques-USA Inc.    Melbourne, FL 32936-1175
May 04, 2004 Weld Backing Tape offers heat resistance, provides close-fitting surface under weld, and suits applications where use of purge gas is impractical. Metallic adhesive tape has 25 mm wide glass fiber strip which is held up against weld preparation area and maintains weld in same plane as plates or tubes being joined. Two versions, one for weld applications up to 80 A, and heavy-duty version for applications up to 160 A, are available.

Bridgewater Systems Inc.    Kanata, ON K2K 3J1  Canada
May 04, 2004 GPRS Revenue Collector and Formatter filters, formats, and streams usage records to appropriate billing and settlement systems. It integrates with existing systems to aggregate event-based accounting data into single-session records that identify subscribers and their usage. Records can be converted and formatted to accommodate any external billing and settlement system. Using XML-based formatting language, extensible data-driven formatting allows new output record formats to be defined.

Lincoln Electric Company, Inc., The    Cleveland, OH 44117
May 04, 2004 Blue Max® stainless steel consumables can be used for welding high alloy, duplex, or super duplex stainless and nickel-based alloys. Products include Stick (SMAW), TIG (GTAW), MIG (GMAW), and Submerged Arc (SAW) consumables. Electrodes are lot-controlled with certificates of conformance available. Packaging options include hermetically-sealed Sahara-Packsâ„¢.

Lincoln Electric Company, Inc., The    Cleveland, OH 44117
May 04, 2004 SuperArc copper-coated wire and SuperGlide MIG bare wire feature MicroGuard Ultraâ„¢ lubricating surface treatment, which reduces spatter and creates stable arc. Treatment improves feeding by reducing friction and guards against worn contact tips and liners, plugged drive roll grooves, and kinked wire guides. It also eliminates wavy appearance that can occur as wire bumps or lurches through gun liner during welding process.

Lincoln Electric Company, Inc., The    Cleveland, OH 44117
May 04, 2004 Semi-automatic Model LF-72 is available in base model, standard-duty bench, and heavy-duty bench model that can accept up to 60 lb spools. Feeder can accommodate .023–1/16 in. MIG wire diameters and .035–5/64 in. flux-cored wire diameters at feed speeds of 50–800 ipm. Two-roll, Universal Wire Drive System is made of die-cast aluminum for consistent wire feeding. Model LF-72 includes 400 A Magnum™ gun, 10 ft control cable, and .035/.045 in. drive rolls.

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 04, 2004 Loctite ZETA 7735, designed for ¼-1 in dia spot curing applications, offers up to 7 W/cm² of UV light at 250-410 nm. It uses 50 W metal halide arc lamp with universal power supply and liquid-filled light wand. Lamp, which features elliptical reflector and custom coating, has 2,000 hr life expectancy. System may be operated manually or with timed shutter light exposure from 0-99.9 sec. Selector switch allows use of 110 or 230 Vac options.

Viking Corp., The    Hastings, MI 49058 9706
May 04, 2004 System K25 utilizes K25 ESFR Pendent Sprinklers and pre-mix of propylene glycol antifreeze and water. It protects up to Class II Storage Commodities in buildings up to 40 ft high with racked storage up to 35 ft. System requires minimum starting pressure of 40 psi and has maximum volume of antifreeze solution of 1,100 gallons. It provides alternative to in-rack sprinkler systems for protecting storage environments as cold as –23°F.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
May 03, 2004 Silicon-based Series HPC0201A, with 0201 footprint, features single-side contact configuration, which eliminates tombstoning problem that occurs using conventional capacitors. Flat silicon surface facilitates pick-up in pick-and-place operations. Available in 44 capacitance options from 0.4–39 pF with tolerances as low as ±1% or 0.05 pF, capacitors are rated for 6, 10, 16, and 25 V operation. Dimensions are 0.024 x 0.012 in. with 0.009 in. profile.

Astro-Med, Inc.    West Warwick, RI 02893
May 03, 2004 Everest VDiS monitors data in real-time and simultaneously displays information in strip chart, numeric datalogging, and x-y plot formats. Alarms can be set to allow waveforms to change color when predefined limits are exceeded. Each channel cay be displayed separately or multiple channels can be displayed on single grid for comparison. Data is scrolled in strip chart format at speeds up to 200 mm/sec. Unlimited number of setups can be saved to memory.

NewAge Industries Inc.    Southampton, PA 18966
May 03, 2004 Suprene® TPR is constructed from polypropylene-based thermoplastic rubber and provides low-temperature flexibility. It is available in both industrial and FDA grades. Sizes available are from 1/8-¾ in. ID in 50 ft lengths and can be used with temperatures from -60 to 275°F. Tubing suits applications involving appliances, peristaltic pumps, foods and beverages, chemical conveyance, pharmaceutical processing, packaging machinery, and ink and paint transfer.

American Plumber    Sheboygan, WI 53082-1047
May 03, 2004 Made of molded plastic, cabinet water softener reduces mineral deposits, iron-staining, scale build-up, soap film, and water spots on pans, glassware, sinks, and tubs. It offers 2 settings to ensure that unit operates at maximum efficiency and initiates regeneration only when needed. Internal bypass provides water during regeneration process. Cabinet measures 13 x 22 x 45 in. and holds up to 225 lb of salt.

JDV Products, Inc.    Fair Lawn, NJ 07410
May 03, 2004 Vessel SDJ-08 Static Eraser employs detachable, pivotal clamp for targeted static removal. Built-in microcomputer notifies user via display lamp alarms if safety circuits detect voltage or fan trouble. Unit provides full-range fan speed control, auto-start mode, and UL and CE approval. With compact, lightweight design, product ensures that parts are electrically balanced as they exit mold with blast of static neutralizing ionized air.