Arc Second Inc.    Dulles, VA 20166
Jun 07, 2004 V-Bar (Vector Bar) hand-held measurement tool provides users of portable or standard CMMs metrology alternative for measurement, inspection, and reverse engineering applications. Product leverages INDOOR GPS technology, enabling one person to measure entire automobile without need for leapfrogging or re-setting of equipment. Design withstands varying environmental conditions, and users can operate independently on different projects/measurement tasks.

Tra-Con, Inc.    Bedford, MA 01730
Jun 07, 2004 TRABOND 2248 thixotropic, all-liquid system applies at room temperature, but requires high-temperature cure. It bonds to metals, glass, ceramics, and plastics. Ultimate glass transition temperature is 109°C. TRA-BOND 2248 complies with specification ASTM E-595-90 for NASA Outgassing acceptability. It is recommended for applications where good mechanical properties are required at high and low temperatures.

Ohaus Corp.    Pine Brook, NJ 07058
Jun 07, 2004 High Resolution Ranger™ features 16-bit microprocessor and Magnetic Force Restoration (MRF) load cell technology, which ensures external resolution up to 1:300,000 with readabilities to 0.00002 lb. Available in three 18-gauge stainless steel weigh platform sizes, capacities range from 6–70 lb. Features include cast aluminum housing, backlit LCD display, and adaptive digital filtering. Products display results in g, kg, lb, and oz.

Efeckta Technologies    Steamboat Springs, CO 80477
Jun 07, 2004 ProTS-Data is used in analysis of raw data associated with mass spectrometry (MS) based proteomics research. Automated software, capable of translating mass spectral data to accurate protein and peptide identifications, utilizes proprietary algorithms that can remove interfering background and noise from datasets. This provides more precise and accurate peptide peak detection results.

ADM Tronics Unlimited, Inc.    Northvale, NJ 07647 1904
Jun 07, 2004 Aqualeneâ„¢ 4370 can function as effective replacement for LDPE packaging structures. It delivers smooth, gloss surface on paper and boards, while providing flexibility for scoring folds. In addition to oil and water resistance, product offers lactic and acetic acid resistance, making it suited for packaging applications such as cup, box, pouch, and related structures.

NAPCO Security Group    Amityville, NY 11701
Jun 07, 2004 GeminiAccessâ„¢ Control Module adds integrated access control to burglar alarm functions of GEM-X255 255-Zone Hybrid Control Panel. Unit provides controlled access to door by releasing mag or electric strike when valid Prox card or Prox keyfob is presented to HID or GEM-PX proximity reader. Sharing door contact with burglary system allows one contact to monitor door and annunciate and report alarms.

Huntingdon Fusion Techniques-USA Inc.    Melbourne, FL 32936-1175
Jun 07, 2004 Suited for TIG and plasma welders, Model TEG-3 employs diamond wheel that grinds tungsten electrodes longitudinally and at set angle for consistent angle and shape. Ground and polished tips prevent arc instability and require minimal resetting or re-welding. Available in 110 and 220 V, 50/60 Hz versions, grinder eliminates circumferential lines and ridges on electrodes and accommodates sizes from 1.6-4 mm.

Leco Corp.    St. Joseph, MI 49085 2396
Jun 04, 2004 Unique® LC-TOFMS Benchtop Spectrometer offers acquisition rates of 100 spectra/sec, with detection limits of 500 attamoles/spectrum or better, and accurate mass measurement within 5 ppm. Windows®-based ChromaTOF® software implements fast LC data handling to facilitate LC-MS measurements using automated Peak Find and Mass Spectral Deconvolution algorithms, combined with library searching and formula generation.

Leco Corp.    St. Joseph, MI 49085 2396
Jun 04, 2004 GCxGC FID system lets users conduct 2D gas chromatography (GC) on complex mixtures. GCxGC technique multiplies resolving power of one gas chromatograph by that of another, resulting in order-of-magnitude increase in number of chemical compounds that can be separated in any given amount of time. System also offers software that simplifies component identification.

EnGenius Technologies, Inc.    Costa Mesa, CA 92626
Jun 04, 2004 WEMEC Wireless Enhanced Mobile Emergency Communications Kit links satellite, cellular, and landline phone access, maintaining vital communications during emergency situations. In event of terrorist attack, earthquake, tornado, fire storm, or hostage situation, system can be deployed in minutes to aid first responder communication. WEMEC may deployed as stand-alone system or behind mobile command center to allow up to 36 users to share 4 phone lines.

Quantitech Ltd.    Milton Keynes MK12 5NP  United Kingdom
Jun 04, 2004 VaporLabâ„¢ combines specific gas chromatography, solid-state detector, and menu-driven operation to obtain consistent results under field conditions. Benzene is detectable to below 0.1 ppm. Sniff mode provides real-time surveying of concentration hot-spots without need for blind sampling. Unit includes built-in sampling pump and does not require carrier gas supply or use replaceable absorption tubes. Results are stored for download via wireless transfer to PC or Palm Pilot.

C & D Technologies    Mansfield, MA 02048-1151
Jun 04, 2004 Series LSM-10A non-isolated, 10 A, point-of-load converters offer input voltage ranges centered around 3.3, 5, or 12 V. Nine output voltages enable 24 models to address variety of applications. Featuring buck-regulator topology, units offer fixed frequency from 100-300 kHz, ±1.25% accuracy, and up to 96% efficiency. Plug-and-play devices feature standard, 6-pin SMT form factor. They do not require heat sinks, supplemental air flow, or EMI filtering.

Robin America Inc.    Wood Dale, IL 60191
Jun 04, 2004 Models EH035 and EH035V are overhead valve engines that are horizontally and vertically mounted, respectively. Air-cooled, single-cylinder units produce max power output of 1.6 hp and use standard automotive gasoline and engine oil. Weighing 8 lb, engines feature silicone-constructed, abrasion-resistant, aluminum piston; chrome-plated cylinder; forged-steel rocker arm, and powder-metal-inserted cam gear. Lubrication system offers 360° operation.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Jun 04, 2004 MACO 6500RS offers Windows® 2000 Pro Ethernet capabilities, 3 modes of closed-loop shoot/fill, adaptive extruder speed control, digital on-demand heater amp scan, statistical process control, and security change function. PC/PLC arrangement permits dedicated sequencing and control of criteria such as temperature, extruder speed, and shot size while providing operator's station for data entry and back-up. Statistical items can be tailored to meet customer requirements.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Jun 04, 2004 Digital Optical Micrometer, Model 8400K evaluates severity of mechanical damage such as scratches, corrosion pits, or blemishes that are difficult to observe by other methods. User focuses on good surface near scratch or pit, sets display to 0.0000 in., then focuses into bottom of scratch or pit and reads depth on digital display. RS232 serial port allows data export to included processor/printer. Sealed, non-magnetic case is dustproof and shock-resistant.

General Equipment Co.    Owatonna, MN 55060 0334
Jun 04, 2004 Suited for floor preparation projects, SG12/E is powered by TEFC 1.5 hp electric motor and features one rotating disc with 12 in. working width. It has top disc rotation speed of 250 rpm and is built for portability with folding handle. Able to be navigated through stairwells, unit has unitized, welded-steel plate frame that includes integral bail design, self-aligning ball bearings, and heavy-duty V-belt reduction drive system.

Master Bond, Inc.    Hackensack, NJ 07601
Jun 04, 2004 Two-component, epoxy-sealing EP110F6, for potting, encapsulation, and casting, has 1–2 mix ratio by weight and cures upon exposure to elevated temperatures. It provides electrical insulation and resists thermal cycling and shock. Medium-viscosity liquid passes Navy Hex Bar Test, MILI-16923C, consisting of 10 cycles from -55 to +155°C. It resists chemicals and adheres to wide range of substrates. It is typically cured in 3-5 hr at 125°C.

Lutze, Inc.    Charlotte, NC 28273
Jun 04, 2004 DIN rail mountable, Industrial Power Supplies consist of 24 V, switched DC units in 210 mA, 420 mA, 750 mA, 1.25 A, 2.5 A, 5 A, and 10 A sizes. They autoselect voltages and include voltage adjuster pot and DC indication light on front panel. Suited for packaging, food, plastics, and automobile industries, Class 2 power supplies include short circuit protection, internal input filter, and low heat dissipation.

ID Technology Corp.    Fort Worth, TX 76106
Jun 04, 2004 With modular component configuration, IDT 250r can read, write, verify, and apply RFID tags in top, bottom, and side label applications. It includes hot swap, spare assemblies that can be installed in minutes.

Fluke Corp.    Everett, WA 98203
Jun 04, 2004 Suited for use in potentially explosive environments, 718Ex is unable to release sufficient energy to cause ignition of flammable material. Unit, available in 30 and 100 psig models, consists of self-contained pressure calibration tool with on-board pump, push-button user interface, and selectable measurement units for pressure. It is suited for use in petrochemical plants, oil platforms, refineries, and other locations subject to risk of explosion.