Magnatex Pumps, Inc.    Houston, TX 77063
May 19, 2004 Silicon carbide (SiC-D) bearings, available in Magnatex® MP, MMP, MPT, and MPH pumps, have surface treatment that reduces friction coefficient and diminishes harmful effect of heat shock during dry-run conditions and start-ups. Chemical-resistant products operate in dry-run condition for 105 min with no cracks or breaks and show no signs of heat-shock damage after operating for 1 hr under dry-run conditions in temperatures to 320°F.

Norgren    Littleton, CO 80120
May 19, 2004 Utilizing quick connect concept, Q2 plastic body valve can be assembled into motion or fluid control circuit. Product delivers minimal pressure drops and is designed to be durable, handling pressures from 5–120 psi. Lightweight unit, which carries NSF and cURus approvals, operates in environments that require ambient temperatures from -10 to +100°F.

Ona America, Inc.    Dayton, OH 45402
May 19, 2004 Model DB 300 Electrical Discharge Machine (EDM) incorporates high-speed pulse technology based on accelerated head action and servomotor control. CNC incorporates technology tables specific to machining of ribs, while automatic program generation produces best-suited program for rib or cavity being machined. Able to operate 24/7 in unattended mode, Expert Erosion System controls entire machining of workpiece from roughing to final finishing.

Denison Hydraulics Inc.    Marysville, OH 43040
May 19, 2004 Available with Electronic Proportional Compensator (EPC), Series PV hydraulic, open-circuit pumps are available with flows of 6, 10, 15, 20, and 29 gpm at 1,800 rpm. Four pumps are rated at 3,500 psi continuous, 4,500 intermittent, and largest is rated at 3,000 psi continuous, 4,000 intermittent. EPC is suited for applications where pressures are required to vary on-the-fly or where multiple pressure settings are required.

Datum Filing Systems, Inc.    York, PA 17404
May 19, 2004 Technical Furniture Systems provide solutions for organizing offices, computer rooms, assembly areas, and shipping stations. Creating clutter-free appearance, modular systems feature printer shelves, tack boards, adjustable shelves, and cable guides that organize cords and cables. Anti-knockout tabs make sure computer equipment remains safe, and units may be connected together to create customizable systems.

Square D Co.    Raleigh, NC 27611
May 19, 2004 Powerpact 150 A H-frame and 250 A J-frame molded case circuit breakers simplify installation and utilize varied types of actuation, including cable-operated handles, rotary handles, and electrical motor operators. They share common mounting points and handle locations and are equipped with thermal magnetic trip system. Field-installable accessories include auxiliary switches, alarm contacts, and shunt trips.

Linear Technology Corp.    Milpitas, CA 95035
May 19, 2004 Housed in SOT-23 package, LTC3459 consists of 10 V synchronous boost DC/DC converter with onboard output disconnect and inrush current limiting. It operates from input voltage of 1.5-5.5 V, and, at 5 V input voltage, generates 8 V @ 30 mA. Features include constant off-time architecture, short circuit protection, and Burst Mode® operation, which uses only 10 µA of quiescent current. Product maintains regulation of VOUT even when below VIN.

Anver Corp. - Anver.Com    Hudson, MA 01749 3214
May 19, 2004 Custom, mill-duty vacuum lifters raise non-magnetic materials from top surface and set them into position without need for blocking or hooks. Featuring beam and vacuum pad attachments with foam seals, they are available with capacities up to 30,000 lb depending on surface area provided for lifting. System controls can be integrated with crane, and other features include parking stands and monitoring system with audio-visual alarms.

Waddington Electronics, Inc.    Cranston, RI 02920
May 19, 2004 Non-contact SONA-TROL® ST-6 performs loop measurements up to 100 times/sec for controlling tension and can provide slack material to next part of process without touching it. Unit assures smooth operation and prevents dragging of extruded materials between processes. Sensor head can be mounted from 18 in. to 20 ft above loop and measures changes in stock distance as small as .010 in. Product also offers provisions for external measurement control.

BTM Corp.    Marysville, MI 48040
May 19, 2004 THIN Air Powered Toggle Press features reduced compressed air consumption, accomplished via Piston Arm and force multiplying Toggle Link design. Presses are available in 1, 2, 5, 10, 20, and 40-ton models with mounting options such as Bench, Floor, and Tool mounts. Uses include Clinching, Piercing, Riveting, Stamping, and Bending. Featuring close stacking capability, press offers options such as self-equalizing units, die set adapters, and control packages.

Kinetic Systems, Inc.    Boston, MA 02131
May 19, 2004 Series 8002 Series Active Electronic Vibration Isolation Workstation isolates all 6 translational and rotational modes of vibration. With natural frequency of less than 1 Hz, it does not produce low-frequency resonance or require air supply. Features include active feedback control system and microprocessor-controlled, automatic leveling mechanism. Tabletops range from 24 x 36 in. to 60 x 72 in., and 600 or 1200 lb load capacities are available.

Sarva Bio Remed LLC    Trenton, NJ 08608
May 19, 2004 SpillRemed provides safe, environmentally friendly, on-site remediation of accidental oil spills in commercial, industrial, and residential buildings. No removal of soil or water is necessary to achieve successful clean up. Product uses cultures of indigenous populations of oil degrading bacteria to effectively dissipate fuel oil. No genetically modified organisms are released in treatment process.

Morgan Electro Ceramics    Cleveland, OH 44146-5418
May 19, 2004 Designed for circuits with high peak current and repetition rates, laser discharge ceramic capacitors use strontium-titanate based dielectric material, which exhibits negligible piezoelectric/electrostrictive effect. This allows capacitors to be used in high peak current/high shot life applications. Products offer low dielectric loss, resulting in low self-heating. High breakdown strength/permittivity of material allows for storage of high energy density per unit volume.

ConProTec Inc.    Salem, NH 03079 2060
May 19, 2004 MIXPAC® Hand-Held Cartridge Dispensing System consists of manual or pneumatic dispensing gun and static mixer that dispenses 2-component adhesives in 1:1 volumetric ratio. Molded of polypropylene, 75 ml cartridges utilize twist-and-lock static mixers and allow users of MIXPAC System 50 to dispense greater volumes without requiring new gun.

Weber Marking Systems, Inc.    Arlington Heights, IL 60005 4457
May 19, 2004 Using wipe-on method, Alpha V40 automatically peels pressure-sensitive labels, up to 4.72 x 98 in., from supply roll and affixes them to products or packages with 0.04 in. placement accuracy. Integrated controller stores up to 30 label settings, automatically avoids double or skipped labeling, and includes LCD readouts concerning system status. System can be oriented to apply labels to side, top, or bottom of products and is available in right- and left-hand configurations.

GWI Software    Vancouver, WA 98685
May 19, 2004 With architecture that allows for future integration of additional GWI and IBM technologies, c.Support® v10 for IBM® Lotus Notes®/Dominoâ„¢ gives users ability to record, manage, track, monitor, and measure all activity of support operation. Intuitive placement of tabs, menus, and icons facilitate access to information. Other features, such as wizards and spell check, help improve user interaction.

RAE Systems    San Jose, CA 95134
May 19, 2004 AreaRAE hazardous environment monitors, which include AreaRAE, AreaRAE IAQ, and AreaRAE Gamma, incorporate 16 fps, full motion, color video to provide first responders with visual confirmation of toxic or radiation alarm. This aids in determining real and false alarms. Based on 1- to 5-sensor monitor equipped with wireless, RF modem, products can communicate and transmit information in real-time with base controller located up to 2 miles away.

Wilmington Machinery, Inc.    Wilmington, NC 28406 7308
May 19, 2004 With 4,500 lb/hr of barrier extrusion capacity, Series III 60-cavity blow molding system combines 6-layer coextrusion, all electro-mechanical clamp systems, and bottle handling capabilities. Rotary machine consists of wheel system with output and cavitation sized for few thousand to over 20,000 bottles/hr, with any material or layer configuration. In-mold labeling, dehumidification, and customized takeout systems are included.

Pinpoint Laser Systems    Peabody, MA 01960
May 19, 2004 Microgage 2000 facilitates checking perpendicularity of cutting tools, squareness of machine assemblies, and straightness and run out of stage and slide travel. Kit consists of laser transmitter that projects working beam up to 80 ft away, digital display, and receiver that catches laser beam and provides readout for each alignment task. Laser and display operate on batteries, and computer interface allows readings to be analyzed, plotted, and stored.

Alconox, Inc.    White Plains, NY 10603
May 19, 2004 TERGAJETâ„¢ powder and SOLUJETâ„¢ liquid detergents are phosphate-free, low-foaming cleaners formulated to remove residues such as oils, organics, adhesives, and solvents that require emulsifying, penetrating, and wetting. Biodegradable, readily disposable, free-rinsing products employ surfactant system that allows them to be used in parts washers, spray washers, and ultrasonic systems. They can also be used in manual and immersion cleaning.