Roto Hammer Industries, Inc.    Tulsa, OK 74157 0308
Jun 03, 2004 Retaining Cable Kits are sized to hold combined deadweight assembly of valve hand wheel and chain wheel, providing safeguard against potentially serious accident. They are offered in 3 separate series to fit chain-wheel and impact operators from 4–30 in. in diameter. All are stainless steel and can be installed in minutes using ordinary hand tools.

Norgren    Littleton, CO 80120
Jun 03, 2004 Providing command sign and feedback pressure via DeviceNet, digital Series VP51 employs glandless Teflon®-coated spool valve technology, is resistant to corrosion and wear, and provides 30 million cycles. Valve is suited for output pressures from 0–150 psi with power consumption of less than 100 mA/2.5 W, and ambient operating temperature of 23–122°F. IP65-rated unit can operate in compressed air environments that are dry and non-lubricated.

United Grinding Technologies, Inc.    Miamisburg, OH 45342
Jun 03, 2004 StuderGRIND allows shops to use data provided by customer to make graphic representation of machine with necessary tooling. To calculate processing time, user creates grinding program using Pictogramming technology. Production costs are calculated on basis of job rates, tool costs, and energy costs. Estimate is generated in Excel format and sent to customer for approval. Once job comes into production department, operator downloads data and drawing to PC, which is connected to machine.

IOtech, Inc.    Bedford Heights, OH 44146-1833
Jun 03, 2004 DaqBoard/1000â„¢ series provides 16-bit, 200-kHz A/D converter and 16 single-ended or 8 differential analog inputs. Boards feature synchronous analog, digital, and frequency I/O as well as DMA bus mastering. On-board scan sequencer permits user to select up to 512 channel/range combinations and scans all channels contained in sequence at rates to 5 µs/channel. Up to 4 DaqBoards can be used per PC for expansion up to 64 analog input channels and 96 digital I/O signals.

Prodige Software Corporation    Corte Madera, CA 94925
Jun 03, 2004 VG.net is an animated vector graphics engine and graphical designer integrated in Visual Studio .NET. It enables developers to create advanced graphical applications using any .NET language and Visual Studio .NET tools they are familiar with including Toolbox, designer surface, and Properties window. Using VG.net designer, developers create graphical components consistent with .NET development model; each component can expose properties, methods, and events.

Fibergrate Composite Structures Inc.    Addison, TX 75001-4223
Jun 03, 2004 Grating, flooring, and stair products feature slip-resistant surfaces that provide sure footing in wet, slippery conditions. Molded grating is available with concave or grit-top surface, while pultruded grating is available with grit-top surface. Fiberglass floor plate, used in installations where solid flooring is required, features skid-resistant grit-top surface.

Hendrickson International    Woodridge, IL 60517-4904
Jun 03, 2004 With capacity ratings of 40,000–46,000 lb, AR2™ converts RT™/RTE™ walking-beam truck suspensions to air ride, enabling them to absorb road shock and vibration during on- and off-road applications. Providing empty-ride and loaded stability, conversion kit includes 2 trailing arms, shock absorbers, transverse torque rods, height control valves, air springs, and frame hangers. Heavy-duty trailing arm allows up to 14 in. of diagonal wheel articulation.

CyberResearch, Inc.    Branford, CT 06405 2932
Jun 03, 2004 Suited for use in brightly lit areas, NEMA 4/12 SRD Panel PCs are powered by 1 GHz Pentium® III or 850 MHz Celeron® processor and feature 15 in. Sun-Bright 1,750 nit display. Products also provide 9.5 in. PCI expansion slot and network-ready I/O. Able to be swivel-arm or rack-mounted, PCs include 2 Ethernet LAN ports, one RS-232/422/485 and 3 RS-232 serial ports, 2 USB ports, 2 parallel ports, IrDA port, and support for up to 4 hard drives.

Mitutoyo America Corp.    Aurora, IL 60504 9176
Jun 03, 2004 Metris LC50/100â„¢ digitizing, non-contact probe aids in 3D part scanning, inspection, and reverse engineering. Its PH-10M/PH-10Q interface enables non-contact scanning to 19,200 points/sec, while adjustable camera and laser intensity settings ensure quality of data acquisition from different surfaces/environments. Bundled with COSMOS CMM and CADCompareâ„¢ software, product handles large pointclouds using intelligent filters that extract useful dataset.

Waytek Inc.    Chanhassen, MN 55317
Jun 03, 2004 Constructed of solid brass, Tool-less battery bolts facilitate installation and removal of side terminal battery connections without requiring use of tools. Products are available in 4 styles: short- or long-cable side terminal tri-knob bolt, with or without wing nut for accessories. Bolts are also suited for direct connections of accessories and other equipment.

Astrodyne Corp.    Mansfield, MA 02048
Jun 03, 2004 High-density, U-channel, ac/dc Series USP225 accepts universal input from 85-264 Vac with active power factor correction and 3,000 Vac isolation. Six models provide single outputs from 3.3-48 Vdc. All units contain soft-start circuitry, integral EMI filtering, over-voltage and short circuit protection, power-good LED indicator, output adjustment potentiometer, and Molex-style I/O connections. Ambient operating temperature is -10 to +50°C without derating.

Eraser Company, Inc., The    Syracuse, NY 13221
Jun 03, 2004 Air-operated Model HCA20 cuts materials from 0.010-1.25 in. OD, including most non-ferrous conductors such as copper and aluminum. Guillotine-style blade provides clean, square cutting, while dual activation buttons ensure operator safety during cutting cycle.

Allegro MicroSystems Inc.    Worcester, MA 01615
Jun 03, 2004 Dual-wire, Hall-effect unipolar switches A114x and A118x use chopper-stabilization technique on DABIC5 BiCMOS process to achieve magnetic stability over operating temperature range. Field-programmable A118x lets users externally trim operate points, while factory-programmed A114x provides preset magnetic operate points. Both series offer inherent diagnostic capabilities and internal Zener clamp that protects against over-voltage conditions on supply line.

Steinmeyer Inc.    Bedford, MA 01730
Jun 03, 2004 UltraThrust Precision Ground Ball Screws are offered in 50 x 20, 63 x 20, 63 x 30, 80 x 20, 80 x 40, and 100 x 20 mm sizes, all with 15 mm load carrying balls. UltraThrust 63 x 20 mm ball screw offers dynamic capacity of 430 kN, compared with 179 kN for standard series 1416 ball nut, which uses 11 mm balls. UltraThrust ball screws are suited for very large transfer line modules or to replace hydraulic drives in injection mold machines.

Square D Co.    Raleigh, NC 27611
Jun 03, 2004 Modicon® Momentum(TM) programmable logic controllers (PLCs) are available with conformal coating that enable them to withstand corrosive and high-humidity environments. Coating acts as barrier against fungus, dust, humidity, salt mist, temperature, mixed flowing gas, and ISA. With coating, PLCs can be placed in NEMA 1 or 2 enclosures instead of those rated NEMA 4 or 4X. Snap-together controllers are suited for small to mid-range applications.

Rosenberg, Paul, Associates    Larchmont, NY 10538 0729
Jun 03, 2004 Series KH features free-running, backward-curved impellers made of waterproof aluminum for ventilation of air and non-aggressive vapors and fumes. Closed, external rotor motor is 100% speed-controlled, with sealed ball bearings and Class IP 44 protection against humidity. Air volume is adjustable using pressure and temperature controls. Fans are suited for air handling units, hygienic systems, filter units in clean rooms, and RLT units.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jun 03, 2004 Utilizing 200 MHz processor, Infoprint® 1412 offers up to 27 ppm monochrome printing rates and first page out time as fast as 8 sec. Unit delivers 1,200 x 1,200 dpi resolution at up to half speed. Features include 32 MB memory, standard, and 160 MB maximum memory. Options include token-ring, Ethernet connectivity, and wireless connectivity on network model.

NKK Switches    Scottsdale, AZ 85260-3420
Jun 03, 2004 Complementing fully programmable IS Series SMARTSWITCH(TM), STN Liquid Crystal Display provides wide, high-contrast viewing area of 13.9 x 10.6 mm. It is suited for compact electronic devices that require display of graphics, text, or moving images in tight-fitting locations. Available with straight PC terminals, dot matrix display features multi-color LED backlighting with standard or super-bright options.

MadgeTech    Warner, NH 03278
Jun 03, 2004 Designed for use in harsh environments, TEMP1000P can log internal temperatures in real-time before, during, and after processing. Stand-alone device features 100 ohm platinum RTD sensor in rigid probe for recording -40 to +125°C temperatures with ±0.5% FS accuracy and 0.05°C resolution. With less than 1 min response time, waterproof recorder automatically measures and logs up to 32,767 temperature measurements; all data is date stamped and NIST traceable.

DTIC Dispensing Technologies    S. Lancaster, MA 01561
Jun 03, 2004 EZ-mix®VR Variable Ratio Meter-Mix Dispense System consists of piston-based, user-programmable, positive displacement system that provides repeatable shots with 0.1 cc accuracy. Featuring Constant-Flowâ„¢ technology, system can be hooked up to any size reservoir. Meter-mix dispense system allows on-the-fly variable ratio dispensing to hundredth’s value and stores parameters such as mix ratio, dispensing speed, and piston pump refill speeds.