Elscint Automation    Pune 411026  India
Jun 08, 2004 Auto Loading and Unloading System handles shafts ranging in length from 150 mm up to 1 m. Shafts are kept on inclined table where pneumatic cylinder feeds one shaft at a time to belt conveyor, which then feeds shaft to centerless grinding machine. After grinding, unloading belt conveyor takes shaft out and turns it around using transfer station. Shaft is then fed to another belt conveyor for transfer back to loading station.

Dialog Corp., The, A Thomson Co.    Cary, NC 27511
Jun 08, 2004 DialogLink® v4.0 enables professional researchers to access Dialog services that provide instant access to electronic journals and search functionality. Software also offers automated report templates, XML delivery, and Dialog eLinks. Platform enables company to offer bundled business information, news, and market research content drawn from different services to be accessed through shared interface.

HBM, Inc.    Marlborough, MA 01752 3014
Jun 08, 2004 T-IDâ„¢ and IEEE 1451.4 TEDS compliance use identification module that enables both analog measurement signal and transducer data, stored in digital format, to be retrieved without extra wiring. In T-IDâ„¢ system, each sensor has ID number that is recognized by integrated database software and can automatically configure amplifier for taking measurements. When using TEDS system, all data needed to configure measurement system is stored in transducer chip.

Service Network Inc.    Worcester, MA 01603
Jun 08, 2004 Millennium Series utilizes integrated architecture that brings together high-speed, multi-tasking controller; Ethernet and SERCOS networks; and integrated motion, visualization, and intelligent motor control. Non-productive cycle time is minimized through quick set-up capabilities and features that allow grind cycles to be optimized to save time in both conventional and CBN applications.

Mi-T-M Corporation    Peosta, IA 52068
Jun 08, 2004 With minimal vibration, electric HSE-1002-SM10 operates at 650 psi in steam mode and has 250° water output temperature. Features include insulated trigger gun; totally enclosed, fan-cooled, electric motor with manual thermal overload protection; and top fired, dual spiral coil with powder coated heat exchanger. Unit also incorporates No. 1 or 2 diesel or kerosene fired burner, direct drive triplex ceramic plunger pumps, and 50 ft pressure hose.

Contemporary Control Systems, Inc.    Downers Grove, IL 60515
Jun 07, 2004 In full-duplex mode, EIMC-100T/FCS Ethernet Converter extends fiber distance to 15 km, making single-mode fiber connection via SC-style connectors. Design reduces installation time and improves data flow, and features PnP technology, miniature size, DIN-rail installation, and choice of low-voltage ac or dc power sources.

Central Carolina Scale    Sanford, NC 27330
Jun 07, 2004 Digi Summit Floor Scale measures 4 x 4 ft and is calibrated to digital weight indicator. System incorporates NTEP-approved Digi 120 digital readout with 0.8 in. LED display and RS 232 communication port. Meter features 5-button operation, tilt stand, diamond safety-treadplate steel deck, and 4 NTEP-certified alloy steel shear beam load cells. Maximum load capacity is 5000 lb. Platform has top-access junction box and adjustable feet.

AEMC Instruments    Foxborough, MA 02035
Jun 07, 2004 Phase Rotation Meter Model PR-1 identifies open/de-energized systems as well as phase sequence on 3-phase systems. Compact meter includes permanently attached, loss-proof test leads with tangle-proof separators. It is EN 61010, 600V Cat. III rated and fuse protected. Product is suited for installing rotating machinery and motors and for checking generator output.

GEI International, Inc.    Syracuse, NY 13217 6849
Jun 07, 2004 Slide-rule Model CNF-1307 has scales on edges for direct measurement of points, picas, elite, point sizes, lines, number of words, and number of characters. Copy fitting calculator helps users determine how much copy is required for specified type size and space, what size type is required to fill space with specified copy, and how much space is required for specified copy and type size. Manufactured from laminated plastic, instrument measures 9.75 x 3.25 in.

Dispersion Technology, Inc.    Bedford Hills, NY 10507
Jun 07, 2004 Model DT-300 measures electro-kinetic potential in aqueous and non-aqueous concentrated dispersions and emulsions. It utilizes electro-acoustic phenomenon that makes it suitable for concentrates with volume fraction exceeding 0.1%, with no upper limit. Precision is ~0.1 mV, and measurement time varies from 15 sec for concentrated aqueous oxide dispersions to ~4 min for water-in-oil emulsions. Probe can be inserted into pipe for continuous in-line monitoring.

Philadelphia Mixing Solutions    Palmyra, PA 17078 9518
Jun 07, 2004 Sentinelâ„¢ Impeller features wide, large-diameter blades for high flow and uniform distribution of shear throughout mixing process. Fully welded and bolted designs are available with different coatings and surface finishes to meet mixing specifications. Clean-in-place impeller is suited for applications where fluid motion is required to suspend solids, dispense gas, or blend fluids in high-flow, low-shear process.

International Fiber Systems Inc    Newtown, CT 06470
Jun 07, 2004 Available in standalone or rack-mount versions, D2510WDM Series Universal Serial Data Transceiver features status-indicating LEDs, dry relay contacts, and plug-and-play design. It supports data rates to 512 kbps and transmits RS-232/422/485 serial data signal over one multimode optical fiber. With end-to-end effective range of up to 3.6 miles, product is environmentally ruggedized to meet requirements of NEMA TS-1/TS-2.

Hougen Mfg. Inc.    Flint, MI 48501 2005
Jun 07, 2004 Series 14,000 Holcutters utilize one size arbor for all cutter diameters. Mating connections between arbor and cutter feature 4-lead thread that allows spin-on attachment and prevents overtightening during operation. Shoulder on outside diameter of cutter prevents entire tool body from plunging through completed hole. Cutters are M2 HSS heat-treat hardened and precision-ground tools for making holes from 11/16–3 in. diameter.

Advantech Automation Corp.    Cincinnati, OH 45240
Jun 07, 2004 Controller card MIC-3318 is equipped with 400 MHz system bus, 512 Kb on-die L2 cache, support for DDR memory, and 2 Ultra ATA 33/66/100 high-speed IDE drives. Model MIC-3753 is a 72-bit digital I/O card for CompactPCI bus. I/O lines are divided into nine 8-bit I/O ports, allowing user to configure each port as input or output. General-purpose MIC-3780 is a multi-channel, counter/timer card for CompactPCI bus. It provides eight 16-bit counter channels, 8 digital outputs, and 8 digital inputs.

Mitsui Seiki, USA    Franklin Lakes, NJ 07417
Jun 07, 2004 Model HW63A box way, horizontal machining center incorporates double ball screws on all axes for demanding job shop applications. With X, Y, Z envelope of 1,000 x 800 x 800 mm, machine targets high-speed and precision applications. Model VU65A-SH is a 5-axis contouring machine featuring vertical swivel head for handling complex parts such as turbine blades, auto cylinder heads, and intricate molds. X, Y, Z travel range is 1,280 x 650 x 610 mm.

Malvern Instruments Inc.    Westborough, MA 01581
Jun 07, 2004 Mastersizer 2000E laser diffraction-based particle size analyzer provides entry-level, scalable system suited for applications where particle size analysis is performed and expected to meet specific requirements. Featuring SOP-driven operation and method definition, unit measures particle size from 0.1-1,000 microns. Semi-automated sample dispersion accessories cover analysis of wet and dry sample types.

Meggitt Sensing Systems (Endevco Corp.)    San Juan Capistrano, CA 92675
Jun 07, 2004 Model 7302BM4 employs sensing system comprised of temperature compensated piezoresistive accelerometer designed with Wheatstone bridge element. Angular accelerometer is fluid-damped to optimize frequency and phase response within 0-250°F temperature range. It offers stable frequency response from 0-1,600 Hz and provides linear output to 50,000 rad/sec². Nominal sensitivity is 5.0 mV per krad/sec² with 10 Vdc excitation voltage. Unit exhibits angular and linear shock resistance.

CONCOA    Virginia Beach, VA 23454
Jun 07, 2004 Series 622 Delivery System has single-body design suited for start up of 12-packs or liquid cylinders. Dome-loaded seat enables system to transition into point-of-use regulator of bulk installation. Used for nitrogen and oxygen assist gases from either cryogenic or high-pressure supply, design utilizes integral pilot regulator with stainless diaphragm and brass bar stock body to maintain purity. Maximum inlet pressure ranges from 600–4,500 psig.

Esco Tool    Medfield, MA 02052
Jun 07, 2004 Air-powered Ground MILLHOG® consists of right angle drive ID clamping end prep tool that fits into water wall boiler tube panels where one tube has been removed and there is 1½ in. radial clearance. Featuring push-pull clamp and release mechanism, tool produces clean, consistent end preps to help provide X-ray certifiable welds. Unit also employs wedge style blade locking system and uses TiN coated cutter blades for chatter-free operation.

K-Tek    Prairieville, LA 70769
Jun 07, 2004 SureShot XP employs compact, all-digital design suited for use in harsh environments. Laser is housed in explosion-proof assembly with screw-on glass cover, and dual-compartment design lets users isolate wiring and terminations from sensing elements and internal electronics. With virtually no beam divergence or false echoes, laser measures distances from 1–50 ft and can be directed through spaces with 2 in. dia.