Arques Technology    Austin, TX 78728
Jun 18, 2004 Model AQ9107 features input voltage of 3.0–3.6 V. Outputs include regulated 1.8 V with up to 500 mA for Baseband processor/MAC, 2.84 V with up to 300 mA for analog functions, and ultra-quiet 2.84 V with up to 200 mA for powering VCO. Microprocessor supervisory RESET function with complimentary output and adjustable reset delay time is included. Regulator features internal over-temperature and over-current management, short-circuit protection, and power good signal.

IMSI/Design    Novato, CA 94949
Jun 18, 2004 DesignCAD v15 includes image handling, integrated raster to vector converter, AutoCAD 2004 DWG/DXF support, units of measure, and 3D symbol content, including over 700 3D symbols and 30 photo realistically rendered symbols. Both 3D MAX and Express versions are available.

TR Electronic, Inc.    Troy, MI 48099
Jun 18, 2004 Interchangeable with existing encoders, ZI-58 series has encoder output of 5-32,768 pulses (131,072 steps), which can be programmed to any value and mechanical zero pulse position required, even after on-line installation. Suited for use by machine designers and maintenance personnel, product eliminates having to keep several encoders in inventory as spares, as with fixed input models.

Sipex Corp.    Miliptas, CA 95035-1701
Jun 18, 2004 Model SP6683 converts unregulated battery voltage from single cell Li-Ion, 2.7–5.5 V, to constant current output required by LEDs. At high input voltages it functions as linear regulator, and at low input voltages it functions as 1.5x charge pump, boosting input voltage to maintain desired LED forward current. Able to drive up to 8 white LEDs in parallel, product is suited for backlight color displays in portable applications.

Syndesis Ltd.    Richmond Hill, ON L4B1J5  Canada
Jun 18, 2004 Carrier-class provisioning solution for Residential and Enterprise VoIP manages delivery of Voice over IP (VoIP) services to subscribers. Software enables carriers to control quality of service, class of service, security, and availability. Offerings include subscriber feature sets, dial plans, digit maps, phone number assignments, and per site information including emergency routing. Ability to manage softswitch routing and media gateway trunking is also included.

Unitek Miyachi Corporation    Monrovia, CA 91017 7133
Jun 18, 2004 Used in automation or benchtop welding, 70 Series weld heads provide consistent welding force down to 0.25 lb, independent of part height and with no overforce. Products feature controlled, repeatable servo-motor actuation; overforce protection; programmable search position; 32 schedules; remote control I/O; and PC communication. Offered in parallel and opposed configurations, products also provide individual speed control for stroke-to-search and search-to-weld.

Klein Tools, Inc.    Lincolnshire, IL 60069
Jun 18, 2004 Made of nylon reinforced with glass fibers, 6 ft Models 910-6 and 911-6 offer resistance to weather, abrasion, and most chemicals. Washable and waterproof rules have measurements marked in black on both sides and edges, with engraved graduations to 1/16 in. Red stud center indicators are marked every 16 in. Positive locking joints and stainless steel spring hinges provide strength.

Eurotherm Controls    Leesburg, VA 20175
Jun 17, 2004 Model 3208, 1/8 DIN controller features text display; 5 on-board process recipes, with 48 parameters per recipe; and proprietary Instant Accuracy® system. Scrolling in marquee fashion, text display aids in controller use and configuration. Once user selects parameter, it displays description of parameter in English; Spanish, French, and German languages are also available. Controller also comes with optional amp-meter display from CT input.

Brady Corp.    Milwaukee, WI 53201 2131
Jun 17, 2004 Designed for use with company's thermal transfer printers, B-7566 Gloss Clear Tamper Evident Polyester labels leave "void" footprint when material is removed. This provides physical evidence of tampering to discourage identity theft or label switching. "Void," also prominently displayed on removed label, prevents re-use of product. Labels can be customized in various ways to suit company requirements.

Technical Services, Inc.    Ames, IA 50010 9629
Jun 17, 2004 RazorOptimal System includes Easy Glide joystick, RazorGage with linear encoder feedback, board-grabber pusher for positive positioning, Model 1000 Whirlwind saw, Zebra printer, 1 GHz PC running Windows XP Professional, 12.1 in. LCD touchscreen, and RazorOptimal software. It offers optional modules that insert space balls and scribe face frame parts. Operator uses joystick to defect and grade parts, while RazorGage feeds stock. Linear encoder position feedback ensures 1.004 in. accuracy.

Graco Inc.    Minneapolis, MN 55440
Jun 17, 2004 MOLSAâ„¢ Multi-Orifice Linear Stream Applicator can apply adhesive films up to 4 mm thick at maximum flow rate of 19,500 cc/min. It is possible to use 2 applicators for one single pass, allowing 20 cm wide patterns. Made of stainless steel with tungsten carbide tips, applicator is available in 5, 7.5, and 10 cm sizes with 0.025, 0.029, and 0.034 in. orifice sizes. It is suited for water-based and non-water-based sealants.

Trion Industries, Inc.    Wilkes Barre, PA 18702 6997
Jun 17, 2004 Shelf Works™ EWT Shelf Management System employs Expandable Wire Tray™ system that adjusts from 3–6 in. or 5–12 in. wide, to fit any individual product. Custom extra tier option permits merchandising of more items, and spring-fed pushers on each level permanently face all lanes of product.

Optek Technology, Inc.    Carrollton, TX 75006-6905
Jun 17, 2004 Consisting of infrared LED and photologic sensor, Model OPI1268 is capable of DC and AC voltage isolation between input and output circuitry while providing TTL signal integrity. Maximum isolation voltage is 16 kV with propagation delays less than 200 ns. Isolator is packaged in opaque plastic housing with transmissive internal light pipe between LED and photologic sensor. High level output current is typically 0.25 µA with max of 15 µA.

BEI Systron Donner Inertial Div.    Concord, CA 94518
Jun 17, 2004 Model MMQ50 utilizes solid-state quartz MEMS inertial rate sensors and silicon MEMS accelerometers. Powered by ±8 Vdc supplies and consuming 4 W, unit features full 6° of freedom sensing capability and internal microprocessor that thermally compensates sensors. Suited for stabilization or guidance and control applications, device outputs serial RS-644 digital signal data stream comprising angular velocities and linear accelerations about 3 orthogonal axes.

Bivar, Inc.    Irvine, CA 92618 2593
Jun 17, 2004 Molded from UL-rated 94V-O Nylon, SRM Series self-retaining LED mounts provide lead-free material per Directive 2002/95/EC for Reduction of Hazardous Substances (RoHS). Leads are guided through dividers within mounts to prevent possible shorting. Constructed with integrally molded standoffs, series accepts T-1, T-1¾, and rectangular LED devices and is available in 18 elevations from 0.100–0.520 in.

HBM, Inc.    Marlborough, MA 01752 3014
Jun 17, 2004 Offered in galvanized and stainless steel versions, Z6 lets users change load cell without removing complete tank-weighing module. Anti-liftoff safety feature secures load cell, and overload stop restricts load cell deflection and protects it from mechanical overload. Design also includes stay rods with side joints for absorbing horizontal forces. Using self-centering pendulum design feature, module provides point load application.

International Light, Inc.    Newburyport, MA 01950 4092
Jun 17, 2004 NIST-traceable, research-grade IL RPS 900 features 1 nm resolution and 2,048 element CCD with proprietary filtering. Providing user-controlled integration time to 25 ms and 16-bit conversion accuracy, it features USB interface and software with several export options, real-time graphing, and peak finding with sub-pixel accuracy. Unit performs programmable time scheduled measurements, time averaging, FFT smoothing and full-color analysis.

Reishauer Corp.    Elgin, IL 60123 1205
Jun 17, 2004 Utilizing continuous generating method, RZ150 High-Performance Gear Grinding Machine incorporates 2 direct drive work spindles and acoustic sensing for alignment of dressing diamonds. It also features automatic fine balancing of wheel on grinding spindle and LNS (low noise shifting). Multi-spindle column that carries work spindles and dressing spindle rotates 180º to facilitate automatic loading of workpieces. It also houses diamond roll to perform wheel dressing activities.

Clean Air Products Clean Air Systems Div.    Minneapolis, MN 55445 1828
Jun 17, 2004 Series 558 Vertical Flow Hardwall Cleanrooms are made from 16-gauge, cold-rolled steel with white baked enamel or powder coat finish. Each includes full-ceiling HEPA filter coverage with plenum sections that provide uniform filtered laminar air flow to clean areas, with filtered air going to 100% of available ceiling surface. Sidewall blower cabinets blow air into upper filter plenums. Sidewall panels contain start/disconnect, wall receptacles, and prefilters.

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Jun 17, 2004 Built with 17.5 mm DIN rail mount housing, DPA53 Series has user-selectable NC/NO relay output that detects under-voltage and improper phase sequence or phase loss. Product lets users know if all phases are present and have correct sequence and voltage. Red LED visually indicates alarm condition, and time delay option is built-in for relay activation. Voltage monitoring ranges are available for 150–230 and 320–480 Vac.