Uniwest    Pasco, WA 99301
Jul 22, 2004 VisionProbe® US-1478 enables technicians to perform visual and NDT inspections, even in total darkness. Four high-intensity LED lights fully illuminate objects for scanning, while variable focus lens projects bright, crisp video images onto display. Camera can be attached to probe handles or to inspector's hand so that it can be positioned to point at any object. Images are displayed on US-454 EddyView® screen along with eddy current scans.

Perma Pure Inc.    Toms River, NJ 08754
Jul 22, 2004 Designed to prepare wet, hot, and dirty stack gases for analysis, 1640 Mini-GASS (Gas Analysis Sampling System) allows users to accurately monitor smoke stack emissions. Gas conditioning system extracts sample gas via integrated sample probe and passes it through series of filters, scrubbers, and dryers. Housed in stainless steel cabinet, components remove water, acid mist, and ash without altering concentrations of gases to be analyzed.

Superior Industries Of Morris    Morris, MN 56267
Jul 22, 2004 Available in lengths from 50–100 ft and belt widths from 24–42 in., Stack-Pac® portable jump conveyors connect screens, crushers, and washing equipment to stacking conveyor. They can be added or removed from operation depending upon stockpile parameters. Available with adjustable-height axle systems, conveyors can be stacked on top of each other for transport or setup in accordion fashion. Hopper radial extensions are available for increasing load zone target size.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
Jul 22, 2004 Without requiring separate discrete I/O bus, Rosemount 848L Logic Transmitter integrates logic and discrete I/O capability on Foundation fieldbus H1 segment. It accepts up to 8 direct-wired discrete inputs, in addition to inputs sent over Foundation fieldbus, and offers 4 discrete outputs. Use of 20 logic equations enables interactions to be processed independently of fieldbus and central controller. Product aids in asset optimization and process automation.

Phoenix Contact    Harrisburg, PA 17111 0100
Jul 22, 2004 Formed from 14 gauge, Type 316L stainless steel, J-BOX SST junction box assemblies simplify industrial wiring projects. Terminal block rail assemblies are mounted and labeled in enclosure, requiring users to mount junction box and terminate conductors. With NEMA 4X rating, products are available in 4 different sizes with terminal block rail assemblies ranging from feed-through to thermocouple blocks.

Moyno Inc. Unit Of Robbins & Myers, Inc.    Springfield, OH 45501 0960
Jul 22, 2004 Featuring one-piece flange housing and quick-change cutter cartridge, Series 4 Annihilatorâ„¢ Grinders are twin-shaft solids reduction units suited for industrial and municipal applications. Equipped with counter-rotating, intermeshing cutters and spacer cutters, grinders protect downstream equipment from being plugged or damaged from large solids.

Emerson Process Management    Austin, TX 78754
Jul 22, 2004 DeltaV v7.3 incorporates PlantWeb® Alerts for mechanical and process equipment, engineering productivity tools, and additional I/O capabilities. System brings motors, pumps, heat exchangers, boilers, and other plant equipment into continuous surveillance. Users can receive failed, maintenance, or advisory alerts. Module Class functionality enables users to build module class definitions for frequently used control and equipment modules.

Axon Corp.    Raleigh, NC 27603
Jul 22, 2004 EZ-Seal® 600SL heat shrinkable sleeve label applicator is capable of operation in single or dual head mode, offering built-in redundancy for 24/7 operations. System, which includes applicator and heat tunnel, integrates with existing conveyors. Capable of applying labels in excess of 600 containers/min, all-mechanical design has minimal moving parts for smooth operation. Other components include cutting assembly and touch screen operator interface.

Axon Corp.    Raleigh, NC 27603
Jul 22, 2004 Continuous-motion, tamper-evident, banding machine, Model EZ-100 bands caps up to 69 mm dia and is capable of speeds to 150 bottles/min. Continuous-motion, full-body sleeving machine, Model EZ-130 can sleeve up to 80 mm dia with speed capabilities dependent upon width and length of sleeve. Each machine can process sleeves or bands with minimal changeover. Both can run side by side on same conveyor line, sleeving, then banding same product.

ETRAGE LLC    Waltham, MA 02451
Jul 22, 2004 PSI Plot Service for Pro/INTRALINK provides designers and engineers automatic means of plotting or creating communication files such as PDF files from drawings, parts, or assemblies stored in Pro/INTRALINK PDM system. Plots or files are created automatically when object stored in Pro/INTRALINK is promoted to approved release level. Software offers on-demand processing for casual users through web browser, as well as batch capability for PDM administrator.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jul 22, 2004 Fabricated in 0.13 micron CMOS technology, TMS320C6711 digital signal processor (DSP) enables imaging systems to perform real-time manipulation of data. Unit, rated at 250 MHz, has 1.4 V core voltage and 3.3 V I/O voltage and provides 1,500 Million Floating-Point Operations per Second (MFLOPS). Able to perform up to 6 IEEE-compatible floating-point operations per cycle, DSP has 32 general-purpose registers of 32-bit word length and 8 independent functional units.

Revere Products    Cleveland, OH 44135 0311
Jul 22, 2004 Designed for floors that experience extreme chemical conditions, Epoxy Novolac is chemical- and acid-resistant. It contains no flammable solvents, meets national V.O.C. emission standards, and emits no unpleasant odor. Providing years of protection against tough abuse, high-gloss epoxy finish is suited for use in high-traffic areas, chemical troughs, storage tanks, splash zones, and warehouses.

ABB Instrumentation    Rochester, NY 14623
Jul 22, 2004 Featuring digital signal processing, FSM4000 electromagnetic flowmeter delivers ±0.5% of flow rate accuracy. With ac excitation, unit measures 100% of useful signal, leaving no measurement signal unprocessed. Diagnostic coil actively adjusts zero and eliminates line noise. Configuration parameters and calibration data are saved in external FRAM, which plugs into DSP converter. Model FSM4000 is suited for pulp and paper as well as metals and mining industries.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jul 22, 2004 Loctite 3944(TM) single-component, medium-viscosity, light-cure, acrylic adhesive bonds plastic substrates that require tough, flexible bond. Fluorescent, low-odor product obtains tack-free surface in under 30 sec using low-intensity metal halide light source. Loctite 3526(TM) single-component, acrylic adhesive cures when exposed to UV/visible light or heat to form tough, flexible bond. Colorless adhesive can be used to bond glass and metal substrates.

Applied Measurements Limited    Aldermaston, Berkshire RG7 8PN  United Kingdom
Jul 21, 2004 Designed with stainless steel diaphragm, DS200 series offers integrated combination of pressure transmitter/transducer, intelligent pressure switches, and digital display. Display has 4-digit resolution with full rotation on 2 axis, offering 240º on front face and 300º from transducer housing. Series comes with one set point, freely configurable from 0-100% FS, and covers ranges from 100 mbar to 600 bar with 4-20 mA or 0-10 V output.

Cognex Corp.    Natick, MA 01760 2059
Jul 21, 2004 Available on PC-based programmable vision systems, PatMax® Software facilitates pattern location and alignment. PatMax XLC finds barely visible objects or patterns in grainy or faint images, such as those produced by powerful magnification techniques, minimizing need for lighting and optics upgrades. PatMax SA provides partial-match alignment, eliminating need for entire pattern to be present in image in order to obtain accurate results.

Rogers Brothers Corp.    Albion, PA 16401
Jul 21, 2004 Specialized application model, designed to transport heavy equipment, measures 90 ft long and has 60 ton capacity. It features 3 air-ride axles with 54½ in. axle spacings combined with 14 ft 1 in. booster assembly and 2 detachable axles. Trailer can be run as 3-axle, close-coupled 4-axle, or 5-axle unit and includes detachable rear frame. With 26 ft platform deck, trailer incorporates No Foot® self-lifting gooseneck that can raise or lower deck under full load.

Nederman, Inc.    Westland, MI 48185
Jul 21, 2004 Specifically designed for safe use in hazardous areas where flammable and explosive dusts are collected, Models P221 Ex and P252 Ex have no moving parts, no motors, and no rotating pumps. All parts are made from antistatic or conductive materials to avoid static electricity loading. Equipped with microfilters with reversed air cleaning, systems collect all types of material; dust, granules or liquids.

My-tronic GmbH    Morbach 54497  Germany
Jul 21, 2004 Suited for environments where time, humidity, and temperature need to be measured under special environmental conditions, my-display-406 consists of water-resistant, 60 mm wall clock with DCF77 radio-controlled clock and temperature and humidity sensors. It can show time in 24 or 12 hr format, display temperatures in °C or °F, and control brightness of display. Device switches between temperature, humidity, and time in adjustable intervals from 1–99 sec.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jul 21, 2004 Thin Film HVPS Series features resistance tolerance down to ±0.01% over range of 50 kilohms to 10 megohms. Model HVPS1 is available with working voltage of 250 V, power rating of 0.125 W, and resistance range of 50 kilohms to 5 megohms. Rated for 300 V, Model HVPS2 offers power rating of 0.250 W and resistance from 100 kilohms to 10 megohms. Both are suited for temperatures from -55 to +125°C. Flame-resistant conformal coating protects epoxy body of resistors.