Larson Davis, Inc., A PCB Group Co.    Provo, UT 84601
Jul 29, 2004 Pimento 5.1 features 4-channel analyzer with upgrade path to 24 channels. Pre-configured test procedures include basic octave and FFT analyzer, vehicle ride comfort, power tool handle vibrations, hand transmitted vibrations, vehicle interior noise, reverberation time, sound transmission loss, and room noise. LMS PolyMAX algorithm, available in Pimento Modal Analysis software, gives clear estimates for resonances, minimizing risk of making errors during pole selection.

Newport Corp.    Irvine, CA 92606
Jul 29, 2004 Fabricated from U-16 polyurethane, NewDamp ND60 provides vibration-isolation support for low-load applications, such as breadboards, optical rails, laser systems, and workstations. Use of multiple-cone geometry yields isolation performance that is load-independent. Isolator does not require electronic circuitry, air hoses, or other supporting hardware. U-16 material is fully cleanroom compatible and meets NASA spacecraft outgassing specifications.

WeldComputer Corp.    Troy, NY 12180
Jul 29, 2004 WeldAwareâ„¢ warns resistance welding manufacturers immediately if process drifts beyond acceptable limits. Unit is programmed by turning keyswitch to teach position and making welds. Accessible fault output and reset input allow integration of monitor with PLCs and other automated systems. Basic unit checks profile of secondary current, secondary voltage, resistance, and power for each weld and turns on red alarm light if user-selectable limits are exceeded.

Watlow Gordon    Richmond, IL 60071
Jul 29, 2004 Interference Fit Construction Heated Parts offer alternative to milled grove or brazed assemblies for temperatures exceeding 450°C. With Finite Element Analysis or iterative prototyping, parts can achieve thermal transfer and temperature uniformity equaling ±1%. All joints can be welded to assure vacuum tight seal. Available in stainless steel, nickel, Inconel®, aluminum, copper, and bronze, heated parts can be customized into variety of shapes and sizes.

General Monitors    Lake Forest, CA 92630
Jul 29, 2004 Modular IR5000 Open Path Hydrocarbon Gas Detection System combines single-beam, single-source, single-detector sensing design with intelligent multi-channel control. System consists of IR source unit and receiver unit, placed 16-330 ft apart, that measure gases active within IR spectrum. Corresponding output is expressed in parts-per-million meters, and lower-explosive-level meters, simultaneously.

EAD Motors, Eastern Air Devices    Dover, NH 03820
Jul 29, 2004 AC Inverter-Duty Induction Motor operates at 230 Vac with standard 3-phase AC inverter drive. Configured in 2 or 4-pole designs, power output is rated at 1/6–½ hp and 1/10–1/3 hp with fundamental frequencies from 10–80 Hz and 20–120 Hz respectively. Shaft extension, measuring ½ in. diameter provides heavy-duty load connections. Size 39 frame motor features open-frame housing, internal fan, electrically-insulated rotor, and center-tap Class-F thermal protector.

Contractors Source Inc    Apopka, FL 32703
Jul 29, 2004 Used above or below water on vessel's surface, Marine Repair Compound consists of 2-part epoxy that can be painted and sanded. Product repairs anything from fiberglass and plastic to aluminum and wood and also aids in procedures such as bolt or cleat repair and installation. It dries white and cures in 2–4 hr, depending on temperature. Also available, acrylic version is offered for making repairs above water.

Graywolf Sensing Solutions    Shelton, CT 06484
Jul 29, 2004 Monitor enables users to mix or match up to 5 gas sensors, plus temperature, while WolfSense(TM) application software allows for clear, real-time display of measurements and instantaneous data-logging and long-term trending. In addition to user-attached text, graphic, and audio notes, logged files include measurement data and calibration info. Desktop PC software is included for analysis and report generation on collected data.

Hoffer Flow Controls, Inc.    Elizabeth City, NC 27909
Jul 29, 2004 Nova-Flow Batch Controller provides local display and transmits flow data for control capability. Plug-n-flow computer also provides for single and dual stage batching processes for use on liquids and gases requiring temperature, pressure, and compressibility compensation. Unit features LED backlit display, capable of showing 4 parameters simultaneously, and 8 expansion slots that accommodate electronic modules for I/O and communications options.

Autologik    Hartland, WI 53029-0616
Jul 29, 2004 Using vacuum approach to pick books from top of stack and place them on flat conveyors, Gemini book module offers continuous flat feeds rates to 70 books/min. Dual side-by-side loading trays allow operator to simultaneously load one side of module while dispensing from other. Able to handle books from 4 x 4 x .125 in. to 21 x 14 x 4 in., product is suited for order fulfillment applications.

SPRUT Technology, Inc.    Naberezhnye Chelny 423827  Russian Federation
Jul 29, 2004 SprutCAM brings CNC milling capabilities to SolidWorks software. It allows users to add directly to SolidWorks button. When add-in is selected, current SolidWorks part is opened directly in SprutCAM. User can immediately update existing toolpaths for part, or select entire set of operations from similar part to apply to CAD model, without switching from one application to another.

Wire Belt Company Of America    Londonderry, NH 03053-7449
Jul 29, 2004 C-CureEdge(TM) open-mesh, stainless steel wire belting features closed-loop ends that facilitate installation while minimizing risk of accidents caused by sharp open ends. Suitable for heating, cooling, drying, and coating, belt eliminates possibility of snags and tangles when used in multi-tier cooling lines. In event of improper installation on conveyor, it will continue to operate safely, even if running backwards, and will not inflict injury to operator.

Horiba Instruments Inc.    Irvine, CA 92614
Jul 29, 2004 Designed for use in process environment, Crystalsizer measures dry powders over size range of 0.7–2,500 microns. Analysis times vary from 30 sec to 3 min, allowing user to closely control manufacturing processes or replace slower analytical methods. Requiring minimal operator training, particle size distribution analyzer offers automatic control of sample feed rate and dispersion pressure, as well as software with correlation functions to match existing measuring techniques.

LMI Technologies Inc.    Southfield, MI 48075
Jul 29, 2004 Using auto focus principles with resolution as fine as 0.7 nm at speeds to 200 kHz, Laser Nano Sensor features spot size of 1-6 microns. It allows for displacement measurement within a few nanometers on quantifying surface roughness of any highly reflective surface. Available in 4 standard models, LNS sensor has measuring range of 0.00016-0.005 in. and operating distance from 0.09-1.0 in. Depending on target, accuracy ranges from 0.022-0.75 nm.

Spectra Logic Corp.    Boulder, CO 80301
Jul 29, 2004 Suited for small- to medium-sized customers, Spectra® 2K library offers 16 TB capacity when offered with AIT-4 drive. Data storage solution supports Fibre Channel, Gigabit Ethernet, and iSCSI protocols, facilitating connection to existing infrastructures. Library offers storage automation at 225 GB/hr throughput and includes integrated barcode reader, single AIT-4 tape drive, 15 licensed library slots, and 3 AIT-4 media cartridges.

FieldCentrix Inc.    Irvine, CA 92614
Jul 29, 2004 FieldCentrix Enterprise Software v4.0 supports multiple currencies and locales with ability to localize dates, times, and numeric formats. Entitlement and SLA information is managed at contract and equipment level while customer obligations are accessible to office and field. Real-time call escalation helps monitor contractual obligations and customer satisfaction, and service engineers have ability to manage their own work order schedules.

Vanguard Solutions Group, Inc.    Glen Ellyn, IL 60137
Jul 29, 2004 Direct Access, foundation of Graphical Performance Series® business performance management software, delivers integrated enterprise information to decision-makers without relying on data warehouse. It supplies comprehensive enterprise information, reporting, and analytics by accessing and integrating information directly from multiple, disparate source systems. Information views can be generated in real-time, or published based on predetermined schedule.

Quest Technologies Inc.    Oconomowoc, WI 53066 4828
Jul 29, 2004 Using real-time frequency analysis, hand-held SoundPro® DLX is built around digital signal processor platform and color graphics PDA-style user interface with backlighting and adjustable screen contrast. Sound Curve Capture utility builds libraries of spectral footprints allowing comparison of prior measurements to subsequent live measurements. SoundPro DLX will connect to wired or wireless Ethernet network and act as acoustical data web server.

Scapa North America    Windsor, CT 06095
Jul 29, 2004 Bioflex® Rx630P consists of 7 mil clear polyester film coated on one side with 2.75 mil thermoplastic urethane heat-seal adhesive. Film is supplied on 1.5 mil polyester release liner. Capable of reactivation, thermoplastic adhesive has no tack and can be used on parts that will be stacked during assembly. High-tack, low-ooze product adheres to variety of substrates and is suited for applications that require heat bonding.

FitCare Products    West Bloomfield, MI 48322
Jul 29, 2004 Recommended by spine care specialists, AirFit BackRest features self-inflation technology, allowing level of firmness to be adjusted for custom fit when sitting. Weighing 6 oz, product can be rolled up for portability and is suitable for car, plane, office, or theater.