Palintest USA    Erlanger, KY 41018 0733
Jul 30, 2004 Splashproof Bromometer Duo uses DPD chlorine and bromine test methods to check on disinfection and sterilization levels. Powered by two 1.5 V batteries, product features automatic switch-off and is supplied with carry case, reagents, and test tubes. Single-button operation results in reading displayed on 10 mm LCD screen. Using proprietary reagents, it tests bromine in 0–10 mg/l range and chlorine in 0–5 mg/l range, both with 0.01 mg/l resolution.

Titan Trailers Inc.    Ontario N4B 2W6  Canada
Jul 30, 2004 Suited for extreme-duty applications, THINWALLâ„¢ self-unloading trailer combines aluminum body with solid steel V-Floorâ„¢ unloading system. With payload capacity up to 130 yd³, 48 ft trailer maintains sure footing while it walks off load. Open-top accepts bulk materials, logs, and lumber in addition to palletized loads. To handle fine abrasives, there are no seals in V-floor design due to overlapping V-slats mounted on full-length bearing.

Heidenhain Corp.    Schaumburg, IL 60173-5337
Jul 30, 2004 Offered in sizes as small as 0.49 x 63 mm, TS 440 features 360° transmission and can be used on iTNC 530 control and higher. It is suited for machines with limited working space that carry out repeated setup and inspection procedures. Transceiver for IR touch probes, SE 540, is designed for installation in headstock in order to move along with touch probe. This ensures reliable transmission of IR signals at any position of machine's working space.

Clausing Industrial, Inc.    Kalamazoo, MI 49007 1822
Jul 30, 2004 Storm T-series 2-axis turning centers include T2, T4, and T8 models with 1.65, 2.12, and 2.59 in. bar capacities and 7.5, 15, 30 hp spindle motors, respectively. Tri-axial models include T6M and T8M, both with turret-mounted powered tooling and 5 hp tool drive motor. Storm 5-axis sub-spindle single-hit machines add second spindle to Storm T6MS and T8MS turning centers. Equipped with G.E. Fanuc controls, T-series is available in Chucker, Barfeed, and unmanned Lights-Out models.

IAC Industries    Brea, CA 92821 2926
Jul 30, 2004 Series i20 Chairs are desk height models with seat adjustment of 18.5–22.75 in. above floor. Series i23 offers seat height adjustment from 22–29.5 in. and includes footrest ring for leg support. Available in ESD configurations for static sensitive areas, both series provide stable body support while enabling user to maintain dynamic posture through movement of chair, rather than body twisting. Chairs include 5 arm aluminum base with dual wheel braking casters.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Jul 30, 2004 Digitally-controlled, Power Feedâ„¢ 10M features 4 drive rolls and optional push-pull capability for aluminum welding. Using Nextweld Waveform Control Technologyâ„¢, each weld mode meets standards for low spatter, weld bead profile, and arc shape. MSP4 user interface panel controls all parameters including weld mode selection, arc control adjustments, weld sequence, limit setting, and lockout. Infrared port allows transfer of data via Palm® OS based systems.

Servometer-PMG LLC    Cedar Grove, NJ 07009-1239
Jul 30, 2004 Flexible, miniature bellows contact springs are made from electrodeposited nickel and gold-plated for conductivity. They minimize shock and vibration in dynamic applications, and help to overcome tolerance buildup and misalignment problems in critical assemblies. Rated for max current of 4 A, contact springs are suited for applications where gentle contact with delicate component or material is required.

PDM Systems, Inc.    Vandalia, OH 45377 9735
Jul 30, 2004 DIN rail mountable, SmartSocket features isolated inputs for direct connection to sensors. With computer program, any of 19 control functions may be selected for instant use with 8-pin octal relay. Rated 24 Vdc, unit offers fast response of .0002 sec allowing off-delay to function as high-speed event catcher. Custom control sequences are available for OEM applications.

Norgren    Littleton, CO 80120
Jul 30, 2004 Series 84720 and 84740 angle-seat, electro-pneumatic, flow-regulating valves combine valve, displacement gauge, and electronic control in single unit. Made from high-grade stainless steel with brass body, units are suited for deployment in aggressive, gaseous, liquid, and vaporous fluid environments with temperatures ranging from 14–356°F. Either 1–10 V or 4–20 mA signal from PLC can control regulation of valves. Pressure rating is 58—87 psi.

Anderson Power Products    Sterling, MA 01564
Jul 30, 2004 Model PM1000GI features 12-position, dial type locator that accommodates 18 different PowerMod and Power Drawer contacts. Integrated 4-indent die includes dial selector with appropriate settings for 24–12 AWG wires. Product also comes equipped with carrying case and tooling required for die and locator maintenance.

Acrosser Technology    Cypress, CA 90630
Jul 30, 2004 Model AR-B1551 3.5 in. EPX CPU board features fanless NS Geode 300 MHz processor. NS Geode GX1 Integrated 2D Graphic Accelerator supports CRT, single-channel 18-bit LVDS panels up to 1280 x 1024. SBC has stackable PC-104 expansion slot, built-in Realtek 8139C 10/100Base-Tx fast Ethernet port, plus 2 COM/2 USB/1 Parallel/1 IrDA port. WinCE.net toolset includes single integrated development environment for building, debugging, and deploying operating system image.

Fairchild Semiconductor Corp.    South Portland, ME 04106
Jul 30, 2004 Suited for WLAN client and access point applications in 2.4–2.5 GHz frequency band, RMPA2455 utilizes InGaP Heterojunction Bipolar Transistor technology combined with 30 dBm output power and 30 dB small signal gain. Linear power amplifier, suited for 5 V environment, comes in 3 x 3 x 0.9 mm, leadless, 16-pin QFN package with 50 ohm internal matching on input and output. On-chip detector provides power-sensing capability, while logic capability provides shutdown options.

Laminations Corp.    Appleton, WI 54912
Jul 30, 2004 Made from weatherproof plastic, Extruded VBoard® protects against product damage during shipping and storage. It is 100% waterproof with glossy black finish. Standard sizes are available in leg lengths of 1.75 x 1.75 in. and 2.5 x 2.5 in. with calipers of 0.060, 0.090, and 0.120 in. Extruded VBoard® is suitable for produce, steel, lumber, and outdoor storage markets.

Delcam International Inc.    Windsor Ontario N8W 5J1, CD   Canada
Jul 30, 2004 PowerSHAPE Pro hybrid modeling software includes all surface and solid modeling capabilities within PowerSHAPE combined with PS-Draft drafting software and PS-Render system for generating photo-realistic images. Combining solid and surface modeling enables case-by-case approach to individual projects. Software provides all solids and surfaces commands from one toolbar and includes embossing technology and morphing commands for whole model edits of CAD models.

Delcam International Inc.    Windsor Ontario N8W 5J1, CD   Canada
Jul 30, 2004 ArtCAM Pro 7 enables creation of CAD models of human face profiles from digital images. Face Wizard guides user through every stage from import of digital image to generation of CAD model. Envelope distortion tool offers ways to manipulate existing relief by stretching or bending envelope within which it is contained. Multiple Cross-Section Two Rail Sweep provides control and freedom when building complex shapes from series of cross sections.

Novell, Inc.    Provo, UT 84606-6194
Jul 30, 2004 Based on .NET framework, Mono v1.0 open source development platform includes C# compiler, .NET-compatible runtime, and 2 stacks of APIs for delivering client Web services and server-side applications. GUI programming library allows developers to target Linux, Windows, and MacOS X with single code base from any Mono-compatible programming language. Also available are tools for creation of product APIs and software development kits that are language independent.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Jul 30, 2004 Suited for those who work with metal studs and tubing daily, 18 V Cordless combo kit, model 0934-29, contains 6½ in. Metal Cutting Circular Saw, Lok-Tor ½ in. Hammer-Drill, and Sawzall Hatchetâ„¢ reciprocating saw. Batteries, charger, metal cutting circular saw blade, 2-pack of Sawzall blades, and safety glasses are also included in soft-sided contractor bag. Work light, also included, projects uniform light pattern without dark spots or rings.

Advanced Power Technology    Bend, OR 97702
Jul 30, 2004 Offered in low profile SP4 and SP6 packages, PowerMOS 7® 1000 and 1200 V MOSFETs and FREDFETs allow operating in hard switching mode in range of 100–200 kHz. They are offered in single switch, Buck, Boost, Dual common source, phase leg, and full bridge configurations. Applications include power factor correction, motor control, UPS, and power supplies operating from 400 Vac mains and above.

Honeywell, Inc., Industrial Automation & Control    Phoenix, AZ 85023
Jul 30, 2004 Universal ¼ DIN Digital Controller, Model UDC2500 monitors and controls temperature, pressure, flow, level, and other process variables in applications such as ovens, environmental chambers, and plastic processing machines. Infrared communications port with Instrument Explorer software enables configuration via Pocket PC, laptop, or desktop computer through wireless connection. Multiple configurations may be stored for review, modification, or archiving.

Asymtek    Carlsbad, CA 92008
Jul 30, 2004 DispenseJet® DJ-9000 utilizes method for applying solder ball reinforcement material to semiconductor packages that eliminates need for dispensing secondary underfill in PCB assembly. Unit shoots fluid stream of underfill adhesive as small as 100 µm wide between balls on CSPs and other BGA packages during semiconductor packaging process. Cured reinforcement material relieves stress at ball-substrate interface by reducing geometric stress concentration factor at that point.