Grieve Corporation, The    Round Lake, IL 60073-2898
Sep 01, 2004 Offering workspace dimensions of 36 in. x 15 ft. x 15 in., electrically-heated, 1,000°F No. 823 features 16 ga, Type 316L stainless steel interior, aluminized steel exterior, and 8 in. thick insulated walls. Rated at 7,800 cfm, 5 hp recirculating blower provides vertical downward air flow. Workload passes through unit on 30 x 1 x 1 in. 316L stainless steel flat wire conveyor belt with ¼ hp motor drive and digital controller, variable from 0.5-10 fpm.

Photron USA, Inc.    San Diego, CA 92126
Sep 01, 2004 Ultima APX-i2 uses interchangeable camera heads and high-speed camera processor. Fast-cycle function can record every cycle of ultra high-speed cyclical mechanism with 1 ns time offset, providing 1 million fps at mega-pixel resolution. CMOS sensor is fiber-optically integrated with 25 mm Micro Channel Plate image intensifier. System offers 1,024 x 1,024 full pixel resolution at up to 2,000 fps or operates up to 120,000 fps at reduced resolution.

Thermadyne Industries, Inc.    St. Louis, MO 63017
Sep 01, 2004 PakMaster® XL PLUS Series includes 50XLP, 75XLP, and 100XLP machines with respective output currents of 15-40, 15-60, and 15-80 A and cut capacities of ½, ¾, and 1 in. Units use 1 Torch(TM) plasma torch featuring ATC(TM) Advanced Torch Connector, which adapts to more than 150 other plasma systems in seconds. Surelok® electrode, start cartridge, and tip combination maximize parts life.

Touch International    Austin, TX 78758
Sep 01, 2004 IRTouch touch screens are highly transparent units that provide maintenance-free and calibration-free operation. Since there are no films or conductive layers, standard transparency is over 92% with 100% possible. Sealed to IP65 standard, screens operate over temperature range of -41 to +70°C. Standard LCD sizes range from 12.1–29 in. with response time of 10–35 ms. Units provide vandal-resistant operation in ATMs, POS displays, and outdoor kiosks.

Renishaw, Inc.    Hoffman Estates, IL 60192
Sep 01, 2004 Housed in stainless steel, NC4 non-contact laser tool setting system features transmitter and receiver units that measure 30 mm in diameter x 35 mm high. It offers repeatable toolsetting at system separations of up to 5 m, and tools as small as 0.2 mm dia can be measured at any selected point along laser beam. Breakage detection can be carried out on tools as small as 0.1 mm. LED, mounted on top of transmitter unit, delivers constant feedback on system status.

Watson-Marlow Bredel Pumps    Wilmington, MA 01887
Sep 01, 2004 PumpSil® platinum-cured silicon tubing features ultra-smooth bore to control protein binding. LaserTraceabilityâ„¢ allows tubing to be laser-marked end-to-end with part and lot numbers and use-by date, ensuring absolute traceability. Indelible fine etch is produced on surface of tube, preventing contamination from inks and other materials. PumpSil meets full quality testing standards, including USP Class VI, ISO 10993, and USDA requirements.

THK America, Inc.    Schaumburg, IL 60173 5340
Sep 01, 2004 Type SKR Actuator combines Caged Technology Ball Screw and Caged Ball LM Guide Technology. Former lends high-speed operation, smooth movement, low noise, and low dust generation. Product features positioning accuracies to 0.020 mm; overall rail lengths of 159–370 mm, depending on model; and stroke ranges of 41.5–219 mm. Ball-screw QZ lubricator ensures long-term, maintenance-free operation.

Fairchild Semiconductor    San Jose, CA 95134
Sep 01, 2004 Available in 20-pin TSSOP package, lead-free FMS6407 delivers combined functionality of high definition, progressive scan, and standard definition filters on one chip. It features triple sixth-order filter with selectable 30, 15, or 8 MHz cutoff frequencies and has capability to bypass filters. Product includes 2:1 multiplexers and will automatically adjust sync tip clamp voltages to appropriate levels, depending on selected video format.

THK America, Inc.    Schaumburg, IL 60173 5340
Sep 01, 2004 Offering rail widths from 70–150 mm, Type SRW Caged Roller LM Guide uses highly rigid rollers with L/D of 1.5 or more. Caged Technology employs synthetic resin cage with curvature that cradles each roller and separates it from the next. Cage keeps rollers uniformly aligned so that skewing is prevented when entering load region of block. Spaces between rolling elements retain grease and act as lubrication system for long-term, maintenance-free operation.

Meter-Man, Inc.    Winnebago, MN 56098
Sep 01, 2004 Series ML6, with center-mounted, adjustable handle and 1.6 in. wide, 2.0 in. dia wheel, is suited for measuring on hard, smooth surfaces. Transparent ABS body is available in clear as well as 5 colors. Fully extended, product has overall length of 39.5 in. When fully retracted, overall length is 17.75 in. Unit incorporates built-in wheel scraper and 5-digit counter with magnifying lens. Imperial and metric versions are available.

Servo Magnetics, Inc.    Canoga Park, CA 91303
Sep 01, 2004 Suited for polygon scanners and blowers requiring stable speed, compact outer rotor brushless dc motor has low-profile 1.5 x 1.2 in. design that produces over 3 oz-in. continuous torque and is capable of speeds greater than 20,000 rpm. Product is optimized for low cogging torque, and design provides direct coupling interface in many applications. Rotor cup is 2-plane balanced for minimal noise and vibration.

Eriez Magnetics    Erie, PA 16506
Sep 01, 2004 Utilizing Hi-Vi magnetic drive circuit and AC controls, vibratory feeders are able to handle materials from micron size to bulky chunks. They also feature totally enclosed, dust and moisture-resistant magnetic drive that extends coil life and facilitates external cleaning. Single feeders or groups of feeders can be controlled from one station, and controls with solid-state components are available for any unit.

C & D Technologies    Mansfield, MA 02048-1151
Sep 01, 2004 Available in 16 models, NNL10 series point of load (PoL) DC/DC converters address voltage and current requirements of high-performance FPGAs, ASICs, DSPs, and microprocessors. SMD devices operate with voltage input from 3.0-5.5 V and are available with output voltages of 0.9, 1.0, 1.2, 1.5, 1.8, 2.0, 2.5, and 3.3 V. Each unit offers continuous short circuit protection, under voltage lockout, and overtemperature protection.

Wintriss Engineering Corp.    San Diego, CA 92121
Sep 01, 2004 Able to capture up to 150,000 lines/sec at reduced resolution, Opsis7500 will image 5,000 lines per second at full resolution. Camera features on-board Motorola 860T PowerPC processor running Wind River’s VxWorks real-time OS and Altera 10K130 FPGA for real-time processing of images in internal 256 Mb memory. Product also offers Ethernet connectivity, analog and digital I/O, and 330 Mbps FibreChannel output for real-time image capture.

Merkle-Korff Industries, Inc., A Kinetek Co.    Elk Grove Village, IL 60007
Sep 01, 2004 GF-bldc gear motor incorporates heavy-duty GF gearbox combined with 2.25 in. double ball bearing brushless motor. It provides up to 300 lb-in. of output torque over variable speed range of 1-30 rpm. Optional features include customized output shafts, integral controls, programmable dynamic braking for back drive resistance, various mounting options, and custom speed profiles.

GripWorks    Arnold, MO 63010
Sep 01, 2004 Offering outdoor ozone and weather-resistant qualities, UV-NPVC meets standards for averting deterioration and cracking. Non-slip exterior surface and shock absorption capabilities guarantee firm grasp, helping to prevent injuries from hand fatigue and muscle strain. Offered in diameters up to 2.5 in., material comes in high-, medium-, and low-density, closed-cell foam rubber. Extruded tube can be further processed into variety of sizes and styles.

ENM Company    Chicago, IL 60646 6135
Sep 01, 2004 Tamper-proof Series E8B provides 1,500 counts per minute and life count of 10 million. Voltage may be applied to count coil continuously without causing damage. Connecting with 22 AWG leads from bottom of counter, unit may be panel, base, rear, or PC mounted. Operating temperature is -25 to 65°C. Counter is UL, CSA, and CE recognized, and is interchangeable with 6-digit counter E6B.

IKey Ltd.    Austin, TX 78754
Sep 01, 2004 Offering 116-key functionality, full size Model DW-5K features integrated 3-button HulaPoint II pointing device, 24 function keys, and 10-key numeric keypad. With sealed, silicone-rubber keypad and ABS polycarbonate case, unit meets NEMA 4x specifications. Keyboard offers 30 ft RF range while operating in continuous power conservation mode. USB dongle allows plug-and-play operation, while manual binding feature locks in keyboard's signal.

Delta Machinery    Jackson, TN 38302-2468
Sep 01, 2004 Pneumatic ShopMaster(TM) line includes 1¼ in. brad nailer, 2-in-1 nailer and stapler, 1 in. narrow crown stapler, and 1¼ in. brad nailer and compressor combo kit. Units offer tool-free depth adjustment, 360° adjustable exhaust, and sequential trigger. Hybrid Style Cabinet Saws have enclosed base with removable dust chute, 1¾ hp motor, hinged motor cover, and choice of three 30 in. fence options. Equipped with 1 micron filtration bag, Dust Collectors come in 6 models that filter 1,200-4,600 cfm.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Sep 01, 2004 Agilent E8045B provides visibility into Pentium 4 system bus, accelerating design of products based on Intel® Pentium® 4 processor in 775-land package. Probe enables connection of logic analyzers to LGA775 processor with minimal mechanical and electrical intrusion. Equipped with electrically passive probe interface adapter, product aligns source-synchronous, quad-pumped data lines and double-pumped address lines with b-clk frequency control signals.