Rockwell Automation / Allen-Bradley/Industrial Automation Sy    Mayfield Heights, OH 44124
Sep 28, 2004 CompactLogix 1769-L35CR and 1769-L32C feature front-accessible Network Access Port that speeds configuration, and integrated ControlNet port mounted on bottom for out-of-the-way cable installation. Model 1769-L35CR includes redundant media, supports as many as 30 local I/O modules, and offers 1.5 Mb programming memory. Suited for single media applications, Model 1769-L32C supports up to 16 local I/O modules and provides 750 Kb of programming memory.

Malcom Co., Inc. (Distributor of LEISTER Hot Air Tools)    Tiverton, RI 02878
Sep 28, 2004 Model MCH-100C Battery Powered Heat Gun Kit features 1¼ lb, hand-held tool that reaches 1,100°F and has built-in motor with fan to provide 2.66 cfm air flow. Equipped with 48 V rechargeable battery and interchangeable 200-400 W heating element, unit allows testing of heat sensors and fire alarms without an open flame.

FBO Systems, Inc.    Duluth, GA 30096
Sep 28, 2004 MLS Dashboard(TM) transforms raw critical data into visually depicted trends, financial impacts, and other enterprise information on user's desktop. It also makes accurate details on purchase and inventory transactions, equipment performance, operational hot spots, trends, and performance metrics at any level of organization. Web-based, executive information system utilizes series of 150+ defined Key Performance Indicators (KPI) and performance metrics.

Sensicast Systems    Needham, MA 02494
Sep 28, 2004 Environmental Monitoring Solution combines proprietary sensor networking platform and SensiNet networking software. It also includes support for multiple gateways for network scalability and support of mesh network installations that span multiple buildings. Sensors conduct real-time environmental monitoring and have remote sensing probes for hard-to-reach, environmentally challenging, or otherwise radio impregnable locations.

Pelican Products, Inc.    Torrance, CA 90505
Sep 28, 2004 Model M12 Rechargeable Aluminum weighs 1.57 lb with batteries and features high-pressure xenon bulb that delivers 151 lumens of white light. Made of die-cast aluminum, octagonal body includes vinyl sure-grip for all-weather usage. Equivalent to 4C batteries, NiCad cell is good for up to 1,000 charges and will deliver nearly 2,000 hours of use.

Menlo Logic    Palo Alto, CA 94301
Sep 28, 2004 AccessPoint SSL VPN Toolkit v1.2 supports identity-based authentication, allowing network administrators to permit or deny access depending on whether valid SSL certificate is present. Multiple authentication domains can be created with different security requirements. Administrators can customize end user portal with optional login banner message, web cache control settings, portal theme, and navigation. Toolkit supports Microsoft Terminal Services v5.0.

Caphyon LTD    Craiova 1100  Romania
Sep 28, 2004 Advanced Installer Professional v1.9 enables users to build MSI packages that run on all Microsoft Windows 9x/ME/NT/2000/XP operating systems. Built on standard, open formats, software creates installers that will launch any type of file at end of installation and prevents installation of older version of product over newer one. Software can also create uninstall shortcuts as well as other types of command shortcuts.

Shimadzu Scientific Instruments, Inc.    Columbia, MD 21046
Sep 27, 2004 Compatible with GCMS-QP5000 Series of instruments, GCMSsolution v1.1 provides full compliance with FDA requirements for CFR 21 Part 11. It also provides support for USEPA, ASTM, and NIDA sample processing as well as reporting requirements for format and completeness. Software features One Window access that puts control of system on one screen, while wizards allow users to create batch and compound tables with up to 1,000 samples.

FANUC Robotics America, Inc.    Rochester Hills, MI 48309 3253
Sep 27, 2004 Available with various reach and payload capabilities, 6-axis Intelligent Robot is operated via i Pendant, with integrated Web browser and optional touch-panel screen. Series includes robot, force and/or vision sensor, and process software. Equipped with 3-D laser vision sensor, robot can pick component and assemble it to subassembly in any orientation. Applications include mechanical assembly, material removal, deracking, and bin picking.

Delta Tau Data Systems    Chatsworth, CA 91311
Sep 27, 2004 Available in 2, 4, and 6-axis packages, Geo PMAC 400 and 600 provide flexibility and power to support linear, brushless, and induction servomotors. Embedded PMAC2 motion controllers can be programmed for any type of motion control application and include PLC programming features for logic control, CNC, gantries, and robotics with kinematics. Products also incorporate Geo servo amplifiers and operate directly from 240 Vac power mains.

Klenk Industries, Inc.    Wilmington, DE 19804
Sep 27, 2004 Duct Pincher facilitates alignment and closing of ductwork gaps, allowing insertion of drive cleats. Made of 16-gauge, smooth-formed, galvanized steel, rust-resistant product adapts to gap sizes up to 1 in. wide. Coated handle ensures comfortable, no-slip grip, and one end of tool has tapered, Y-shaped opening. Once aligned, tool's built-in drive guide allows user to insert drive cleat to close seam.

Nortek Automation, Inc.    Huntington Beach, CA 92649
Sep 27, 2004 Packaging line constructs retail cartons, inserts pre-packaged electronic circuit board, and seals carton. It also prints/applies labels to vertical and horizontal carton surface, adheres hang tab for retail display, and stacks cartons. Labels feature print-on-demand information, including product data, logos, serial numbers, and bar codes. Finished cartons are offloaded in sets of 25 for final bulk packaging and shipping.

ARPAC    Schiller Park, IL 60176
Sep 27, 2004 Equipped with banner applicator, INFRAPAK RTAC-Series accepts pallets from palletizer or forklift, indexes load, and starts wrapping sequence. Banner applicator applies printed banner, displaying company logo or message around perimeter of pallet, and seals tail of banner film to load. Once wrapping sequence is complete, TIE-GR film tail capture mechanism eliminates film tails and secures load to skid.

W.A.C. Lighting Company    Port Washington, NY 11050
Sep 27, 2004 Interconnect Undercabinet Low Voltage Xenon Lighting System uses 18 W, 264 lumen output Xenon Light Bars crafted of extruded aluminum. Designed for end-to-end connection, fixtures facilitate wiring via poke-home connectors, and can provide continuous run throughout space. They use soft-start technology and have electronic transformers with auto-reset. Bars are offered in 1-, 2-, 3-, 4-, and 6-light fixtures with outputs to 1,584 lumen.

Delta Tau Data Systems    Chatsworth, CA 91311
Sep 27, 2004 Featuring Windows-based environment, PMAC NC v5.0 can be combined with user's favorite PC-compatible CAD/CAM or conversational package. Multi-tasking utilities of Windows operating system enable CNC parts to be run while user simultaneously programs other applications. Connectivity options, such as Ethernet and USB2.0, help reduce time spent transferring part program files. Part program size is limited only by hard drive space.

Dapra Corporation    Bloomfield, CT 06002
Sep 27, 2004 Featuring computer-designed wiper geometry, Series APET and XPET allow aggressive material removal rates. Series APET is intended for milling most steels and cast irons, while Series XPET is suited for nonferrous materials such as stainless steels, copper alloys, and aluminum. Both types are effective when used with HREM helical roughing end mills, which are available in 1, 1¼, and 1½ in. cutting diameters and are suited for square shoulder roughing applications.

Dapra Corporation    Bloomfield, CT 06002
Sep 27, 2004 Available for ball-nose, square-shoulder, and toroid milling, screw-on modular heads allow greater effective reach than solid end mills. Close tolerance mounting minimizes runout. Heads have standard wrench flats, so no special metric wrenches are needed.

Polymer Laboratories, Inc.    Amherst, MA 01002
Sep 27, 2004 Packed with reversed phase and both strong and weak cation and anion wide pore exchange media, Capillary and Micro Columns do not leach either soluble or particulate species. Capillary columns, with internal diameter of 300 µm, are suited for pg to ng sample sizes and are used with flow rates around 4 µl/min. With internal diameter of 1.0 mm, Micro Columns are suited for ng to mg samples sizes and typically operate at flow rates of 40 µl/min.

NYLOK Corp.    Macomb, MI 48042 4007
Sep 27, 2004 NYPLAS(TM) prevents leaks without need for O-rings, gasket seals, or sealant compounds. Process applies Plastisol material under heads of fasteners, pop-style rivets, and double-ended flanged screws to seal out water, dust, and air. Black-colored sealant provides noise-dampening anti-rattle. NYPLAS is reusable and will not shrink or dry out from age or exposure to elevated temperatures.

Durex Industries    Cary, IL 60013 2979
Sep 27, 2004 Flexible heating elements, with standard density of 5 W/sq in., meet application requirements in aerospace, medical, composite fabrication, optical equipment, and computers. Tear-resistant Kapton® heaters are 0.007 in. thick, measure up to 20 x 26 in., and handle temperatures from -319 to +392°F. Silicone Rubber heaters permit composite bonding and curing, as well as repair and fabrication operations. Sizes range from 6 x 6 in. to 20 x 20 in.