Miracle Paint Rejuvenator Co., Inc.    Inver Grove, MN 55076
Nov 04, 2004 Pacer Industrial Mixers create aggressive shear that ensures heavy industrial products such as automotive finishes, architectural paints, inks, and epoxies are thoroughly mixed. Multiple drives such as cord electric, explosion proof, and air allow mixing to take place in every environment with every product. Single arm, dual arm, counter, and floor models are available. Safety Covers provide maximum safety and quiet for operators.

Lamart Corp.    Clifton, NJ 07015
Nov 04, 2004 Designated 1103-75, 2.5 mil acrylic adhesive transfer tape provides loop tack value of 120 oz-in. and peel value of 100 oz-in. from stainless steel. It uses 75 lb polycoated liner and is suited for applications that require high tack and peel values.

Habasit America (formerly Habasit Belting)    Suwanee, GA 30024
Nov 04, 2004 Available in the FDA-conforming polypropylene and polyacetal, HabasitLINK® M3843 Tight Radius 1.5 in. Belt minimizes both polygon effect endemic to modular belts and size gap between adjacent conveyors. With collapse factor of 1.6, side-flexing belt allows extreme tight turns. T-bar design of individual module's cross rib imparts high lateral stiffness. With open area of 37% and open contact area of 65%, belt provides generous passages for cooling air or draining water.

Mate Precision Tooling    Anoka, MN 55303
Nov 03, 2004 Mate EasyTap(TM) produces precisely located threaded holes, with repeatable quality, in CNC thick turret punch presses. Threaded holes are produced in pre-punched holes or in extruded holes located on sheet. Features include automatic lubrication system, pre-pierce hole miss protection, and push button length adjustment. Tooling produces full range of threaded hole diameters in materials including stainless steel, mild steel, and aluminum.

TDK Semiconductor Corporation    Tustin, CA 92780
Nov 03, 2004 Suited for applications requiring compliance with ISO-7816-3 and EMV4.1 standards, 73S8024RN has LDO architecture that allows IC to provide card with up to 90 mA minimum. Product, available in SO28 and QFN32 packages, can be used in conjunction with any host microcontroller and utilizes LDO voltage regulator. IC is suited for use with VideoGuard® Conditional Access solution in set-top-boxes, digital TVs, and Personal Video Recorders.

Diversified Technologies, Inc.    Bedford, MA 01730
Nov 03, 2004 MIL-qualified, fully isolated power converter, PCS-5000, employs solid-state switching and control algorithms to provide max output waveform fidelity with minimal harmonics and distortion on output. Capable of functioning as frequency converter, load isolator, and ac/ac or ac/dc power supply, it appears to line as resistive load with unity power factor and harmonics. Rack-mountable product provides 1,500 W of power, with galvanically isolated input and output.

Hamworthy Peabody Combustion Inc.    Shelton, CT 06484
Nov 03, 2004 SmartScanâ„¢ 121 microprocessor flame scanner senses presence and condition of flames in various applications. Suited for coal, oil, gas, and non-standard fuel scanning, it features bar graph display, -40º to +140ºF operating temperature, and discrimination techniques. Pilot and ignition systems, available in oil-electric, gas-electric, and direct-spark, offer capacities up to 30 MM BTU/h standards and operate under all furnace and combustion air conditions.

Lin Engineering    Santa Clara, CA 95054
Nov 03, 2004 Size 14, 0.9°, modular step motor, 3509V, integrates windings encapsulated with thermally conductive, ceramic-based polymer. Measuring 0.82 in. thick and 1.44 in. squared, bipolar stepper weighs 0.27 lb and possesses holding torque values to 16 oz-in. Step accuracy is ±1.5 arc min at 1/64 microstepping, and mounting plate allows user to choose from multiple mounting options for Nema 14 and Nema 17 sizes to fit specific applications.

Edmund Optics    Barrington, NJ 08007
Nov 03, 2004 Impact PPT Camera Systems incorporate high-speed microprocessor, 128 MB solid-state memory, Ethernet and serial interfaces, and real-time OS. CPU supports number of cameras with resolutions from 640 x 480 at 60 fps to 1,600 x 1,200 at 12 fps. Both systems can be programmed with Inspection Builder software, which incorporates algorithms for measurement, defect detection, part location, package inspection, OCR, and data matrix code reading.

Anver Corp. - Anver.Com    Hudson, MA 01749
Nov 03, 2004 Powered by compressed air, Model VPF-57 has circular pad attachment with soft skin foam rings that pick up coils of paper, vinyl, and foil labels without damaging sides. Ergonomic handle and controls can be integrated with virtually any hoist for feeding presses and machinery. Lifter includes vacuum guard system with check valves and audio-visual alarm to signal loss of air. It can be supplied with custom designed vacuum pad attachments to meet user requirements.

Diversified Technology Inc.    Ridgeland, MS 39157
Nov 03, 2004 Based on Intel E7520 chipset, Model ATC5231 utilizes Intel Xeon Processor with 800 MHz system bus in single or dual configurations. Board is compliant with PICMG 3.0/3.1 specifications for AdvancedTCA platforms and is capable of transferring data at 6.4 Gb/s to processor. System memory of up to 16 Gb is supported via 4 ECC-protected DDR SDRAM memory modules. Onboard integration features two 64-bit/100 Mhz PMC sites, 2 Gigabit Ethernet base channels, and 2 USB ports.

TruSeal Technologies Inc.    Beachwood, OH 44122
Nov 03, 2004 GridLocâ„¢ muntin end clips are designed with thin attachment lip and special positioning legs to facilitate repositioning of muntin bars and to provide secure retention of bars within insulating glass unit. Narrow lip locks end clip in place between sealant and glass. Offered in both black and gray, clips accommodate variety of airspaces and muntin bar profiles.

Techcon Systems    Garden Grove, CA 92841
Nov 03, 2004 Measuring 1.06 in. dia x 3.45 in. long, Model TS5622VU-DVD dispenses low-medium viscosity fluids and delivers consistent deposits over range of shot and bead sizes. Stainless steel fluid housing ensures compatibility with variety of chemicals, particularly those used in manufacture of DVDs and CDs, such as UV cure adhesives, resins, and lacquers. With max fluid pressure of 70 psi, valve operates at up to 400 cycles/min and minimizes turbulence to counteract air bubbles.

Anver Corp. - Anver.Com    Hudson, MA 01749
Nov 03, 2004 Available in 40 sizes from 2 mm, EOAT Miniature Vacuum Suction Cups handle delicate parts where gentle attach and release is critical. Units come in flat and single or multiple bellow styles for use with push-in, flanged, and barbed fittings. They feature translucent, non-marking silicone compound that has no dyes, operates up to 600°F, and is FDA-approved. Cups are also offered in anti-static compounds, NBR, nitrile, neoprene, natural gum rubber, vinyl, and urethane.

Orbimatic GmbH    Peterborough PE7 3FT  United Kingdom
Nov 03, 2004 OrbiIMAGE allows still and video images to be captured and stored on standard memory card. Images can be stored with file name matching data log file number, facilitating cross reference for validation purposes. System is supplied with 8 mm diameter probe and 90° adaptor. For smaller diameter tubes, 5 mm probe can be provided.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Nov 03, 2004 Diamond Blades are manufactured with Laser Fusion(TM), which uses laser-generated heat to fuse mixture of synthetic diamonds and bonding material directly into blade core. In Segmented blades, every 5th segment is raised for aggressive cutting, while segmented gullets clear cutting path. Turbo blades keep serrated edge in constant contact with material for smooth action. Continuous Rim blades feature smooth sintered rim to ensure constant contact with material and chip-free results.

Stanley Vidmar    Allentown, PA 18105 1151
Nov 03, 2004 Available for workstations, benches, and cabinets, Work Surfaces consist of seamlessly formed, 16-gauge stainless steel bonded to medium-density fiberboard core. Rounded edges prevent clothing snags and create completely smooth work area. Restaurant-grade stainless steel offers protection against rust and corrosion, while melamine backing on underside of base helps seal out moisture. Work surfaces can be ordered in various lengths from 30–120 in.

Cyclics Corporation    Schenectady, NY 12308
Nov 03, 2004 CBT® 100 and CBT® 200 melt to water-like viscosity when heated, then polymerize into engineering thermoplastic PBT when catalyzed. CBT 100 features processing temperature between 190-240°C, while CBT 200 ranges from 170-240°C. Available in 1- and 2-part systems, both provide natural high-gloss surface, and are not hygroscopic, so dimensional tolerances are maintained. Resins are suited for rotational molding, nanocomposites, compounding, and injection molding.

Master Appliance Corp.    Racine, WI 53403
Nov 03, 2004 Proheat® Variairâ„¢ PH-1300 Heat Gun features separate controls for temperatures from 130–900°F and air flow from 1,425–3,550 fpm. Using closed loop feedback system, electronic circuitry maintains constant temperature at all airflow settings while using any of 5 attachments. UL Certified unit is suited for soldering and desoldering, heating temperature sensitive materials, bending and forming plastics, curing resins, drying filler, and shrinking tubing.

TE Connectivity Ltd.    Berwyn, PA 19312
Nov 03, 2004 Singlemode SC Connectors have been tested to Telcordia GR-326, Issue 3; Service Life-Part A, using standard match-cladding fiber. They incorporate 6-position tuning feature, which optimizes fiber alignment and performance.