LeCroy Corp.    Chestnut Ridge, NY 10977
Apr 04, 2012 Intended for Summit(TM) PCIe protocol analyzer product line, PCIe 2.0 cPCI serial interposer provides dedicated probe that helps analyze in-band PCIe data traffic between cPCI serial card and its system chassis. Star architecture is made up of serial point-to-point connections; one system slot can control up to 8 peripheral slots. Instrument supports PCIe data channels with lane widths up to x8 at data rates up to 5 GT/s.

Bayer MaterialScience LLC - Polyurethanes    Pittsburgh, PA 15205
Apr 04, 2012 Offering alternative to ceramic coatings, one-component (1K) thermal-cure polyurethane coating addresses requirements of glass decorators, including ability to decorate and label over cured Bayer coating, scratch resistance, and full color palette. Coating does not utilize heavy metals, such as cadmium, and formulation contains 2 waterborne polyurethane dispersions (PUDs), and Bayhydur® blocked polyisocyanate.

Alliance Memory, Inc.    San Carlos, CA 94070
Apr 04, 2012 Rated for -40 to +85°C, Models AS4C4M16S-6TIN, AS4C8M16S-6TIN, and AS4C16M16S-6TIN offer densities of 64, 128, and 256 Mb, respectively. Devices feature fast access time from clock down to 4.5 ns at 5 ns clock cycle, and clock rates of 166 MHz. Internally configured as 4 banks of 1M, 2M, or 4M word x 16 bits with synchronous interface, SDRs operate from +3.3 V power supply. Units provide programmable read or write burst lengths of 1, 2, 4, 8, or full-page, with burst termination option.

GOEPEL electronics LLC    Austin, TX 78759
Apr 04, 2012 For complex projects based on integrated system backplanes or motherboards with multi-slot interface, SYSTEM CASCON(TM) JTAG/Boundary Scan development Environment (v4.6 and onwards) integrates Board Merger. Tool generation supports completely project-oriented definition of multi-board target architecture, subsequently enabling automatic generation of consistent project database while maintaining original signal designations and board characteristics.

Panasonic Co.    Secaucus, NJ 07094
Apr 04, 2012 Featuring built-in portable ultrasound system, CardioHealth Station performs non-invasive examination of peripheral vessels. Software's combination of B-Mode and Color Flow Mode allows technicians to distinguish between plaque-mimicking motion artifacts and actual presence/absence of plaque. Allowing for multi-angle image acquisition, software selects image with thickest build-up of arterial intima-media thickness. Reports can be exported to network folder for integration into EMR.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Apr 04, 2012 Available in quantities as low as 10 pieces for initial prototyping purposes or larger quantities of full waffle trays for production purposes, bare dies foster design of equipment with smaller form factors by allowing implementation of multi-chip modules (MCM) or systems-in-package (SiPs). Those building MCMs can integrate desired components, such as amplifiers, data converters, and power components, into single substrate.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Apr 04, 2012 Featuring combined fixed- and floating-point capabilities, TMS320C665x is based on KeyStone multicore architecture and delivers real-time performance. Products meet need of video security and traffic management, where there exists need to carry out both video processing and analytics at end point. Single-core C6655 and C6654 deliver up to 40 GMACs and 20 GLOPS and 27.2 GMACs and 13.6 GLOPS, respectively, while C6657 features two 1.25 GHz DSP cores and delivers up to 80 GMACs and 40 GFLOPs.

Richco, Inc.    Morton Grove, IL 60053
Apr 04, 2012 As slotted cable holder with pressure grips, UCG-6BK mounts to panel using No. 6 or M3.5 screws. Product can accommodate up to 7 cable bundles, and cable holders can be removed to accommodate larger cable bundles. Featuring HDPE base (RMS-422) and TPE inserts (RMS-433), black grip is designed so that cables are pushed in by hand. Design also facilitates cable removal.

CAS Data Loggers    Chesterland, OH 44026
Apr 04, 2012 Featuring universal input channels, dataTaker DT82E records temperature, voltage, current, 4-20 mA loops, resistance, bridges, strain gauges, frequency, digital, serial, and calculated measurements. Logger connects to most sensors via analog and 4 bi-directional digital channels, 4 high-speed counter channels, and SDI-12 channel. Capable of storing 10 million data points, logger includes alarm capabilities, RS232 with modem support, Ethernet, and USB memory stick ports for data transfers.

General Cable    Highland Heights, KY 41076
Apr 04, 2012 Able to survive applications where oil, liquids, vapors, and other harsh substances can attack jacketing, EXZEL(TM) High-Endurance Electronic Cables are UV resistant and contain sequential footage marking. Low-Smoke, Zero-Halogen (LSZH) constructions are also available. All cables are customizable to application requirements with regard to jacket color, conductor count and construction, shielding, composites, gauge sizes, insulation and jacket construction, and armoring.

Mach III Clutch Inc.    Ludlow, KY 41016
Apr 04, 2012 Driven at constant speed by primary drive of machine, SensiFlex® tension control clutches and brakes include 19 models with proprietary ULOW (ultra-low coefficient) friction facings. These single-surface, air-actuated friction devices maintain tension on roll of material - paper, film, foil, wire - as it is being unwound/rewound. Span of air pressure traversed to deliver torque required at core up to torque required at full roll (and vice versa) allows precise web tension control.

CAS Data Loggers    Chesterland, OH 44026
Apr 04, 2012 With Electrocorder EC-7VAR Kit, users can view onsite power consumption in kilowatt hours, as well as identify voltage supply faults and power spikes. Three-phase meter is available in 4 models recording at amp ranges from 4 A to 3 kA. Using constant data sampling technique, logger samples each cycle multiple times for up to 300 days of continuous recording. All models include logger, 4 voltage leads, 3 Rogowski Coils, USB lead, software, and carrying case.

Morris Technologies    Cincinnati, OH 45241
Apr 04, 2012 Designed for use on EOS DMLS machines, Aluminum 6061 is precipitation hardened and heat-treated to exceed minimum requirement of AMS standards for 6061-T6. General purpose alloy is comparable to typical commercial wrought properties and is suited for variety of applications found in aerospace, transportation, consumer products, and medical industries.

Ohmite Mfg.    Rolling Meadows, IL 60008
Apr 03, 2012 At 27 mm long, MV/MA 101 and 301 heatsinks hold 2 TO-264 devices with single spring clip. This eliminates need for mounting holes and screws and provides same amount of force after repeated use. At 38 mm tall, R2 Series is offered in TO-264 configuration with cam-clip that secures device without mounting holes or screws. W Series, featuring integrated spring clip, is also designed to secure TO-264 device. All heatsinks are available with degreased, black, or anodized finishes.

MEDER electronic, Inc.    West Wareham, MA 02576
Apr 03, 2012 Measuring 5 x 1.8 x 2.2 mm, MK24 series has rugged over-molded package containing hermetically sealed reed switch. Products do not require any external power to operate and achieve min life expectancy of 50 million operations at 5 V, 5 mA, 100 Hz. Suited for applications with low power and space limitations, series is available in NO and NC versions, 5 contact sensitivity ranges, and 3 SMT lead designs: flat straight cut axial lead; flat, bent SMD gull-wing lead; and J-lead.

Artila Electronics,. Co., Ltd    Taipei 231  Taiwan
Apr 03, 2012 Supplied in metal casing, PAC-4070 is powered by AT91SAM9G20 ARM9 processor with memory management unit and features 64 MB SDRAM, 128 MB NAND Flash, and 2 MB DATAFlash. Programmable Automation Controller (PAC), pre-installed with Linux 2.6.29 OS and busybox utility collection, has failure-proof and redundant booting design. Along with USB, serial, and Ethernet interfaces, I/O includes 16-bit isolated A/D channels, opto-isolated digital inputs, and high-drive isolated digital outputs.

FZTech, Inc    New Taipei   Taiwan
Apr 03, 2012 Employing 4 Cree LEDs, MR16-05 series accepts 12 V AC/DC input, runs on 5 W, and allows for illumination from front and back of spotlight. Body enhances heat dissipation, which ensures long life, and unit does not produce any UV, IR, or heat emissions. Suited for discreet installation, series offers luminous flux of 380 (±10%) or 450 (±10%) lm, CCT of 3000K or 6000K, and CRI of greater than 80 (WW) or or 75 (CW). Choice of beam angle includes -30° and 45° options.

SNC Manufacturing Co., Inc.    Oshkosh, WI 54902
Apr 03, 2012 Available in models from 50 Va to 5 KVa, Global Control Transformers provide operator safety by delivering stable output voltage while accommodating momentary current inrush that occurs when electromagnetic devices are energized. Single-phase units include pre-wired primary and secondary fuse blocks mounted on top. Backed by UL, CSA, cULus, and CE agency approval, transformers are available with temperature classes adjustable by Va to meet customer requirements.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Apr 03, 2012 Delivering over 24 W of output power at 355 nm, Paladin(TM) Advanced 355 24000 provides TEM00 beam with M² less than 1.2, beam pointing stability of less than 20 µrad/°C, long term power stability of less than ±2%, and low noise characteristics of less than 1% rms from 10 Hz to 2 MHz. Mode-locked, diode-pumped solid-state laser maximizes throughput in digital patterning of any-layer HDI PCBs employed in fabrication of miniaturized devices, such as smartphones and tablet PCs.

ILX Lightwave Corp.    Bozeman, MT 59771 6310
Apr 03, 2012 Featuring digital PID control loop, 60 W Model LDT-5940C achieves temperature stability of less than ±0.003°C with output current noise and ripple less than 2 mA rms. Unit incorporates preset PID values and auto-tune PID mode that automatically determines optimal PID values. With linearized thermistor sensor mode, controller can achieve ±0.2°C accuracy over temperature range of -30 to 85°C with 10 KW thermistor. USB 2.0 and IEEE 488.1 GPIB interfaces enable remote operation.