ABM Drives Inc.    Milford, OH 45150
Apr 08, 2011 Designed for industrial cranes, Model GH 40000 comes in dual-speed version, which is powered by 5/20 kW asynchronous cylindrical rotor motor with torque transmitted by 3-stage aluminum parallel shaft gearbox. Unit is suited for lifting speeds of 2.6/3.3/4.2 m/min at drum diameter of 405 mm and 6/1 reeving. Speed-controlled version, equipped with 38 kW motor with encoder feedback, allows for lifting speeds of 4.9/6.2/7.6 m/min at 4/1-reeving. Both include wear-resistant dual surface safety-brake.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Apr 08, 2011 Designed to protect USB-OTG ports against transient voltage signals, Model VBUS053CZ-HAF provides 3 lines of USB ESD protection at 5.5 V working range and 1 line of VBUS protection at 28 V working range. Unit features low max leakage current of 0.085 µA at 3.3 V and 1 µA at 5.5 V. Housed in lead-free LLP75-7L package, device provides transient protection as per IEC 61000-4-2 at 15 kV contact and 15 kV air discharge as well as surge current protection in accordance with IEC 6100-4-5 from 3 A.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Apr 08, 2011 Qualified to MIL-PRF-38535, hi-rel DG408 connects one of 8 inputs to common output determined by 3-bit binary address. This 8-channel, single-ended, analog multiplexer features 44 V max supply rating, on-resistance of 100 W, and charge injection of 20 pC. Enable pin allows multiple devices to be used together to increase number of input signals per application. Offered in 3 military package options, product is optimized for high-speed data acquisition and audio signal routing.

Bobcat Company    West Fargo, ND 58078
Apr 07, 2011 Offering switch-actuated all-wheel (AWS) and skid-steer drive options, A770 suits applications requiring low ground disturbance, reduced tire wear, and fast travel speed as well as maneuverability. Features include vertical lift path, 132 in. lift height, 31.5 in. reach, and 42° dump angle. With 12.6 turning dia in AWS mode and 7.2 ft in skid-steer mode, loader employs 2-speed transmission and has 12.3 mph (high range) and 7.1 mph low range travel speed.

FANQUIP    Singleton DC   Australia
Apr 07, 2011 Relocatable roof-mounted fan system heats air that passes through it into workplace from outdoors. Providing air temperature management in many industrial processes, product is suited for use in fiberglass curing, concrete curing, opto- and piezo-electronics assembly and testing, adhesives, as well as urethanes and polyurethanes applications. It is also beneficial for curing rate control of resins and finishes, such as in furniture production.

Pass & Seymour/Legrand    Syracuse, NY 13221
Apr 07, 2011 Level 1 15 A/120 V chargers are portable units that can be used during road travel and plug into 15 or 20 A receptacle. Hard-wired to 20 A circuit, Level 2 20 A/240 V chargers provide full charge to vehicles in 3-6 hr. Both electric vehicle chargers are weatherproof-rated and have built-in ground fault protection. Units are designed for residential and light commercial applications and are compatible with all plug-in electric vehicles.

Auralex Acoustics    Indianapolis, IN 46256
Apr 07, 2011 Suited for use when recording voiceovers and vocals, ISO Series MudGuard(TM) isolates microphones from noise bleeds and external overtones. Portable isolator uses Studiofoam sound-absorbing acoustical foam, which helps minimize excessive room ambience and off-axis sound. Unit mounts to most microphone stands and clips, and offers adjustable height. Included hardware allows microphone to be moved closer to MudGuard for more controlled sound.

Schaeffler Group USA, Inc., INA USA Corp.    Fort Mill, SC 29715
Apr 07, 2011 Combination of tapered roller (locating) and cylindrical roller (non-locating) bearings with angular adjustment capability enable narrow axial guidance of wind turbine rotor shaft, minimizing effects of vibration. Bearing housing design enables required angular adjustment to be made in order to compensate for any misalignment between bearing positions. Able to prevent high axial clearances, solution is designed for supporting main rotor shafts of wind turbines.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
Apr 07, 2011 Completely plug-and-play, 1011 - PhidgetInterfaceKit 2/2/2 provides 2 analog inputs, 2 digital inputs, and 2 digital outputs on dongle-sized board that supports USB voltage from 4.75-5.25 Vdc. Respective update rates for analog inputs and DIO lines are 1,000 and ~125 samples/sec. Solution comes with custom 12-wire cable, where wires 1/2/3 and 7/8/9 end with female connector designed to take Phidget sensor cable; other wires are loose. Users decide OS and computer language.

Powerstax plc    Farnborough, Hants GU14 0NR  United Kingdom
Apr 07, 2011 Model TVR3001, 3,000 W DC-DC power conversion rack features 3 modules, each with two F501 full brick DC-DC converters, coupled with 2-phase boost converter, to provide standalone power solution. Modules plug into 19 in., 2U rack which can be used in 19 in. cabinet of various heights. Operating in temperatures from -25 to +60ºC, product offers step-up or step-down power conversion and has input range from 11-36 Vdc, suitable for MIL-STD-1275, and output voltages of 12, 15, 24, 28, and 48 V.

BinMaster    Lincoln, NE 68507
Apr 07, 2011 Offering real-time bin level monitoring for solid materials, BinView is comprised of SmartBob2 or SmartBob-TS1 sensors mounted on bins, wireless or wired data communications network, gateway for connectivity to PC or IP network, and data collection software. Latter can be viewed securely by any authorized individual via Internet or company LAN/VPN. System eliminates manually checking while promoting efficiency of ordering and logistics for all types of operations.

SJE-Rhombus    Detroit Lakes, MN 56502
Apr 07, 2011 Installer Friendly Series® Three Phase Demand/TD and Capacitor Start/Run models offer support for C-Level(TM) floatless technology. This supported sensor converts water pressure in tank into low-voltage electrical signal and sends it to IFS panel, which displays level in inches or centimeters to facilitate system monitoring. Pump activation and alarm levels can be adjusted using panel touch pad, eliminating need in-tank manual adjustments.

CRAIC Technologies Inc.    San Dimas, CA 91773
Apr 07, 2011 Designed to measure and compare spectral output, intensity, and color consistency of each pixel, Model 308 FPD(TM) allows for high-spatial resolution mapping of micro-displays. Unit is added to open photoport of microscope or probe station, allowing users to acquire images and spectra of microscopic sample in milliseconds. Pixels can then be compared with one another for consistency, or maps of both intensity and color can be generated for each device.

FANQUIP    Singleton DC   Australia
Apr 07, 2011 Featuring galvanized construction, Tunnel Vent Fans are placed into one end of shed and pull hot air through louver into outside atmosphere. Units include self-tensioning device, which eliminates need to physically tension bolts every 2 or 3 months. Instead of centrifugal clutch system, which is prone to jamming, fans use no-fail weigh-control operation, which provides spring-loaded opening from spinning impeller.

Electro Standards Laboratories    Cranston, RI 02921 3403
Apr 07, 2011 PathWay® Model 7294 16-Channel, CAT5 RJ45 A/B Switch with Ethernet and RS232 Remote Control allows sharing of single-port interface device, connected to common port, among 2 other devices connected to A and B ports for each channel. Remote control is via Ethernet 10/100 Base-T connection and either Telnet commands or GUI through RJ45 remote port. All 16 channels are switched simultaneously and all 8 pins of RJ45 interface are switched. Front panel LEDs display position and power status.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Apr 07, 2011 With 30 V LED supply voltage, 16-channel Model AS1121 can be used directly with 24 V supplies. Each of 16 channels can be individually adjusted by 4096-step greyscale PWM brightness control running at 10 MHz as well as by 64-step constant-current sink for dot correction. To prevent high inrush currents, IC offers controlled output delay grouped by 4 channels. Housed in 5 x 5 mm 32-pin TQFN package, driver meets needs of LED video walls and LED backlights in monitors and TVs.

Castell Interlocks, Inc.    Chicago, IL 60601
Apr 07, 2011 Ergonomic, X-type key exchange unit is configured to trap and release keys in pre-determined sequence, depending on operating requirements of safety interlocking system. Able to have multiple keys entering and/or withdrawing, unit is available in one key to release 3 or 6 keys, 6 keys to release 4, or any other combination. Enclosure is fully welded for optimal rigidity, while locks are located to be rear-mounted and have no visible fixing holes, keeping out dirt or food.

NLB Corporation    Wixom, MI 48393 2824
Apr 07, 2011 Covering 8 operating pressures from 4,000-40,000 psi, ultra high pressure (UHP) NLB 605 series offers flows as low as 20 gpm and is available with diesel and electric engines rated up to 600 hp. Pumps can be converted from one pressure to another within about 20 min and they are designed to facilitate maintenance operations.

Round, David, & Son, Inc.    Streetsboro, OH 44241
Apr 07, 2011 Suited for cleanroom material handling, Lab-Lift(TM) Strap Hoist features highly polished finish and urethane-coated, lubrication-free lifting strap, which eliminates particulate contamination associated with chain hoists or wire rope hoists. Hoist mechanism is enclosed in smooth-sided polished 304 stainless steel enclosure for washdown. To further reduce potential contamination, welds are smooth-ground, faces are flush-mounted, and fasteners are plugged.

The Union Tool Corporation    Warsaw, IN 46580
Apr 07, 2011 Able to produce up to 120 x 60 x 4 in. panels, veneer/vinyl laminating system incorporates hot melt roller coater, powered lay-up conveyor, and rotary laminator. Unit accepts hand-fed core materials and applies adhesive in smooth, even, controlled amount. While common edge guide ensures proper positioning of veneer top layer and delivers core to backstop, upper veneer rack conveyor is angled and adjustable to help ensure proper delivery of top laminate layer.