Performance Technologies    Norwood, MA 02062
Nov 18, 2004 NexusWareâ„¢ ISM provides Linux-based software suite and development environment for shelf management technology. Linked with CPC7301 Intelligent Shelf Manager, software allows users to develop and integrate application with intelligent system management functions in embedded platforms. Using included APIs, developers can control specific aspects of CPC7301's behavior. Software includes pre-ported Linux Kernel with debug tools, boot image utilities, and embedded tools.

Informative Graphics Corp.    Phoenix, AZ 85022
Nov 18, 2004 Brava!® Enterprise v5.1 augments intranet and extranet deployments where content is to be securely accessed, shared, and annotated in collaborative workflow. Thin-client software can view, markup, and print variety of document, image, and CAD drawings using Internet Explorer. Version 5.1 creates and views Content Sealed Format, which incorporates Visual Rights(TM) security framework, giving authors selective and persistent security controls over content.

Pentek Inc.    Upper Saddle River, NJ 07458
Nov 18, 2004 Sampling at rates to 215 MHz, Model 6822 dual-channel, 6U VMEbus signal acquisition and processing board features 12-bit ADCs and up to 4 front panel data port connectors that output data at rates to 320 Mbytes/sec each. VXS interface provides two 1.25 Gbyte/sec switched serial fabric ports to VME backplane. Available in commercial, air-cooled, and conduction-cooled versions, board is also offered with 24-pair LVDS data channel through P2 backplane connector.

Atmel Corp.    San Jose, CA 95131
Nov 18, 2004 Series LCD AVR® Flash Microcontrollers address requirements of portable and battery-operated applications. Models mega329 and 649 have integrated 100-segment LCD controller and are housed in 64-pin package, while mega3290 and 6490 have 160-segment LCD controller and come in 100-pin package. Units consume 300 µA at operating frequency of 1 MHz and have throughput of 2 MIPS/mW. Interrupts on up to 18 inputs can wake part from power down mode in less than 1 µs.

Orbimatic GmbH    Peterborough PE7 3FT  United Kingdom
Nov 17, 2004 Compact, water-cooled ORBIMAT 165C can be used to control welding heads that are capable of cutting 3–275 mm OD tubes, pipes, and fittings. Full package, consisting of controller, power supply, and cooling unit, weighs 24 kg with full coolant level. Inverter technology throughout machine enables it to work with any input voltage from 80–260 Vdc, while Compact Flash port on front panel allows welding data to be stored or transferred.

Textron Fastening Systems, a business unit of Textron Inc.    Troy, MI 48098
Nov 17, 2004 Avseal® II plugs holes in thin metal components situated in restricted areas. Two-piece structural stem locking mechanism seals holes with diameters ranging from 4–20 mm in steel, iron, and aluminum. Plugs can be placed flush to hole or deep in casting, creating pressure-tight seal with push-out resistance up to 15,000 psi. Applications include engine blocks, cylinder heads, transmission components, brake systems, compressors, hydraulic blocks, and pumps.

NOTIFIER Fire Systems    Northford, CT 06472
Nov 17, 2004 Onyx Series includes Model 640 Fire Alarm Control Panel, ACPS Addressable Power Supply, XPIQ multi-channel audio transponder, RFX wireless detection systems, and Acclimateâ„¢ Plus detector. All have black patterned look, along with network, panel, and peripheral device designs. Units can be linked together to form integrated solutions for any life safety challenge.

Johns Manville    Denver, CO 80202
Nov 17, 2004 LinaTex offers fabricators and installers abuse-resistant insulation for lining sheet metal air ducts. It is made from 100% post-industrial recycled, long strand fiberglass bonded with thermosetting resin. Airstream surface is protected from damage during fabrication by black fiberglass mat surface, and edge-coating covers leading edges per NAIMA/SMACNA requirements. Liner complies with ASTM C 1071 thermal and acoustical performance standards.

Wall Industries, Inc.    Exeter, NH 03833 4556
Nov 17, 2004 Featuring 4:1 input range, Series DMW is available with 9–36 or 18–75 V inputs and either single or dual outputs. Output voltages include 3.3, 5, 5.1, 12, 15, ±12 and ±15 V. All converters are housed in a 1 x 2 x 0.40 in. industry standard package and operate at efficiencies up to 86%. Additional features include 1,500 Vdc insulation, short circuit protection, 6-side shielding, remote on/off option, and MTBF rating of more than 700,000 hours.

PIAB Vacuum Products    Hingham, MA 02043
Nov 17, 2004 Featuring modular, expandable design, Adjustable Vacuum Palletizing System accommodates dissimilarities in product size without need for additional end effectors. It includes VGSâ„¢ 3010 Vacuum Gripper System in which COAXâ„¢ vacuum cartridge is integrated with DURAFLEXâ„¢ suction cup in single unit. Palletizing system is suited for handling products in food, beverage, chemical, pharmaceutical, personal care, and industrial applications.

Shuttle Inc.    Deutschland   Germany
Nov 17, 2004 Built around Intel® 915G and ICH6-R chipset, Model XPC SB86i delivers Intel® Pentium® 4 processor compatibility, Intel® Graphics Media Accelerator 900, and x16 PCI Express graphics cards. It uses recyclable material and conforms to established industry standards. Scalability is provided through support for standardized components such as PSU, heat sink, and motherboard.

SKF Motion Technologies    Lansdale, PA 19446
Nov 17, 2004 IWIS Grip Chains enable feeding, transporting, and positioning of soft foils, plastics, and other thin packaging materials with large areas. Offered in single- and double-row versions with 1- or 2-tip grippers, chains feature wear- and corrosion-resistant nickel-plated clamping elements. Differing levels of spring force allow wide range of materials to be gripped gently. Swiveling action promotes proper and consistent feeding of materials.

IMSI/Design    Novato, CA 94949
Nov 17, 2004 TurboCAD Professional v10.5 incorporates D-Cubed's 2D Constraint Manager with 2D and geometric constraint management tools for points, lines, circles, and arcs. Any 3D model created from constrained 2D profile will automatically update whenever 2D profile is changed. Software can also convert legacy 2D drawings into geometrically constrained drawings. Features include NURBS-based facet deforming and bi-directional associative dimensioning capabilities.

Kerk Motion Products, Inc.    Hollis, NH 03049
Nov 17, 2004 Designed for applications that require minimal friction, aluminum Spline Shaft series is treated with proprietary TFE coating and coupled with graphite and PTFE-filled thermoplastic bushing. Products are available with any combination of basic or anti-backlash bushing; plain or thread mount bushing; and ¼, 3/8, or ½ in. dia shaft. Standard lengths are offered to 24 in., and hollow configurations and lengths to 96 in. are available as custom.

Duraline Div., J.B. Nottingham & Co., Inc.    Islandia, NY 11749
Nov 17, 2004 Suited for indoor and outdoor use where moisture poses problems, Block Steamers mount onto wall, ceiling, or flat surface to provide safe, temporary, overhead lighting. Sockets are integrally molded in solid Hypalon rubber, and rubber O-ring forms watertight seal around neck of each bulb. Body accommodates clear Vapor-Proof Pyrex globe and steel wire-guard. Units also feature internal steel, crush-proof reinforcing ring and accessible brass grounding ring.

Artesyn Technologies    Framingham, MA 01701
Nov 17, 2004 Ultra Series 200 W quarter-brick converters provide single isolated outputs of 2.5, 3.3, and 5.0 V with continuous current ratings of 80, 60 and 40 A, respectively. Converters have footprint of 2.3 x 1.45 in. and height of 0.3 in. with input voltage range of 36-75 Vdc and single isolated output voltage generation. Converters suit applications such as core routers and switches, transmission systems, and optical networking.

Fortress Interlocks Ltd    Erlanger, KY 41018
Nov 17, 2004 Bolt Module, Model BM, and stainless steel version, Model BMS, interface with devices such as power breakers, valves, and earth switches, indirectly interlocking power sources. Units ensure that all energy sources are reduced to zero before access to potentially hazardous machinery is possible. Model BM is available as single access lock, or with up to 10 multiple access lock modules, eliminating need for separate key exchange boxes.

MUEHLBAUER AG    Roding 93426  Germany
Nov 17, 2004 Designed for personalizing ID-1 format cards, Scope 5400 features central user terminal with GUI and can process PVC, PC, and ABS materials. System can be fitted with 4–20 chip encoding stations, various laser modules, inkjet printing modules, magstripe encoding stations, embossing, and thermal printing modules. Pneumatic input and output stacker systems handle up to 500 cards each in standard magazines. Throughput of up to 1,500 uph can be achieved.

ADMET    Norwood, MA 02062
Nov 17, 2004 ExPress servo-hydraulic universal testing machines are available with off center loading option that enables moment or torsion testing on machine designed for tension and compression testing. Available in capacities from 11,250–135,000 lb, systems are offered with Precise Digital Controller or MTESTWindows Materials Testing System. Former is suited for testing similar parts, repetitively, and latter provides flexibility of Windows-based testing system.

IGEL Technology    Fort Lauderdale, FL 333309
Nov 17, 2004 Based on IGEL Embedded Flash Linux OS, Clever Client models in Premium series include IGEL-564 Premium, IGEL-5128 Premium, and SAP GUI-equipped IGEL-5128 Enterprise. All support communication protocols RDP 5.1 Linux client, X11/XDMCP, and ICA 8.2 with Citrix program neighborhood functions. PowerTerm emulation suite, with integrated Kerberos authentication protocol, provides access to Legacy host applications. IGEL-564 X-Term is designed for use as classical X terminal.