Molex Inc.    Lisle, IL 60532-1682
Dec 01, 2004 RJ-45 Ethernet/IPâ„¢ cordsets and receptacles offer PCB and IDT receptacle versions, as well as overmolded single and double ended bayonet style cordsets. They are designed with one sealing surface, minimizing chances of failure. Both units have IP 67 and NEMA 6P ratings to prevent water and dust particles from affecting functional integrity. They are category 5e specified and meet EtherNet/IP specifications of both Open DeviceNet and ControlNet Vendors Association.

Bud Industries, Inc.    Willoughby, OH 44094
Dec 01, 2004 Suited for all 19 in. panel-width equipment, ValuRack Cabinets feature one pair of integral full-height panel mounting rails in front, recessed 1.00 in., with EIA universal spaced mounting holes. Available in panel heights of 61.25, 70.00, and 78.75 in., units are 22 in. wide with 26 in. outside depth and 24 in. clear inside depth. Cabinets support up to 700 lb of equipment in standard configuration. Knockouts provide access for cabling.

Contec Microelectronics USA, Inc.    Milpitas, CA 95035
Dec 01, 2004 Measuring 146 x 157 x 64 mm, BOX-PC 360 utilizes 400 MHz Intel® Ultra Low Power Celeron processor with 100 MHz FSB and 256 Kbyte full-speed L2 cache. Heatsink built into top of case provides sufficient heat dissipation to make fan unnecessary. External interfaces include CardBus PC card slot, two 100Base-TX LAN, 4 USB 2.0, IDE, RS-232C/422/485, and AC97 audio ports. Slot-in mechanism facilitates mounting or replacing of storage devices.

Intergrated Engineering    Amsterdam 1105 BJ  Netherlands
Dec 01, 2004 Equipped with integrated ID3 antenna, multi-technology, e-Document Reader allows use of ID1 to ID3 documents and cards where position of antenna may vary or is not known. Unit is card operating system-independent and can be supplied with integrated antenna or customer-specific antenna. Through optimization in data handling, modules are within 50% of specified read/write requirements according to ICAO.

Tusk Direct Inc.    Bethel, CT 06801
Dec 01, 2004 Series ERL double rail guides consist of 2 precision ground, 12 mm steel shafts with support blocks set at increments of 100 mm. Series ERN consists of two 12 mm steel shafts supported uniformly throughout range of travel on anodized aluminum support profiles. Series ERW is spaced 100 mm apart for torsional stability. Extended travel ER slides feature 2 parallel, hardened and ground 12 mm diameter rails secured in 25 mm high aluminum channels. Roller carriages are available for all guides.

Cognex Corp.    Natick, MA 01760 2059
Dec 01, 2004 Checkerâ„¢ 101 visually detects presence of items during manufacturing process. Design provides illumination, optics, sensor, processor, memory, and I/O, all fully integrated in single industrial-grade package. Since Checker automatically detects when product is ready to be inspected, it does not require external trigger, even for products in continuous motion at high speed.

Orbimatic GmbH    Peterborough PE7 3FT  United Kingdom
Dec 01, 2004 Models RPG 1.5 and RPG 4.5 produce square and burr-free finish on tubes. Model RPG 1.5 covers from 3–38.1 mm OD, while Model RPG 4.5 covers 25.4–114.3 mm OD. After collet sets clamp tube on outside diameter, lathe type cutter is rotated and introduced to tube end on micrometer feed system to machine it square. Micrometer feed system allows precise amount of material to be removed from tube for sizing purposes. Bench mount stand facilitates operation.

Circuit Breaker Industries, Inc.    Exton, PA 19341
Dec 01, 2004 Unaffected by ambient temperature and sympathetic heating, Hydraulic/Magnetic Circuit Breakers can be reset immediately. Offered in 1 and 2 pole configurations with snap-in, clip-in, and threaded-neck mountings, units have current ratings from 0.02–25 A. Miniature B frames carry 100% of rated current from -40 to +203°F. Breakers have UL 1077, CSA, VDE, and TUV approvals, and are offered with various trip time characteristics, circuit configurations, and switching methods.

Jordan David    Horsham, PA 19044
Dec 01, 2004 Designed to reduce outdoor slips and falls in harsh winter environments, ICEGRIPS® Clear Choiceâ„¢ fits over work shoes and boots and provides 36 hex-head screws for traction on ice and snow. Product, constructed with transparent polymer, features Advanced Angle Tread® design. Available in sizes from M–XXXL, product also features 2 in. clean arch area and ½ in. defined heel that enable safer ladder climbing without removal.

Veriteq Instruments Inc.    Richmond BC V6X 2W8, CD   Canada
Dec 01, 2004 Veriteq VL-2000 Validatable Data Logging Kit includes one or more VL-2000 data loggers, 21 CFR Part 11 compliant data logging and graphing software, A2LA-accredited calibration certification, and IQ/OQ validation protocol. Each data logger is self-powered by 10 yr lithium battery and has internal memory of 21,500 time-based readings. Accurate to 0.15°C and 2% RH over -40 to +85°C range, kit provides wireless alternative to cabled thermocouple validation.

Anver Corp. - Anver.Com    Hudson, MA 01749
Dec 01, 2004 Anver VT-Series See-Thru Head, able to lift up to 30 individual containers of paint, putty, or similar products, features clear Lexan® top that facilitates alignment of vacuum cups. It is equipped with bellows-style suction cups to accommodate surface variations within containers and designed to provide full vacuum even if several cups have no load attached. Each vacuum cup screws into single air plenum within clear pick-up head.

ITT Industries - A-C Pump    Seneca Falls, NY 13148
Dec 01, 2004 Vertical column and axial flow pumps are suited for sewage, water supply, wastewater, storm water, and flood control applications where pumping requirements can exceed 500,000 gpm. Vertical wet pit column pumps have optional pull out design and are available in sizes up to 120 in. dia with 600 ft heads. Horizontal axial flow pump design has axially split casing and is offered in sizes to 132 in. with capacities to 600,000 gpm and heads to 25 ft.

Peter Paul Electronics Co., Inc.    New Britain, CT 06050
Dec 01, 2004 Designed for use in cold environments, FKM seal material provides bubble-tight sealing for solenoid valves. Proprietary seal formulation is suited for applications from northern pipelines to cryogenics and other extreme environments where maintenance and replacement are difficult.

Pfeiffer Vacuum Inc.    Nashua, NH 03063
Dec 01, 2004 With 1,200 l/s pumping capacity, TPH 1201 turbopump is designed for harsh-duty applications with rotor geometry that permits foreline tolerance of 0.5 mbar without requiring drag stage. Performance of TPH 2301 minimizes number of pumps required in semiconductor 300 mm multi-pump chambers. It delivers 2,100 l/s for Nitrogen and 1,950 l/s for Hydrogen and Argon, while offering more than 2,000 sccm of gas throughput for Argon and Nitrogen.

Diversified Technologies, Inc.    Bedford, MA 01730
Dec 01, 2004 Suited for short pulse applications, High Voltage Pulse Generator includes pulse modulator, power supply, and controls. All-solid-state pulse generator provides full load fault protection and plug and play functionality. Able to be configured as bi-polar unit where necessary, it provides adjustable power, pulse widths, and frequency. Unit suits applications requiring up to 25 kW power at up to 25 kV, pulses from 500 ns to dc, and pulse frequencies to 10 kHz.

Tapeswitch Corp.    Farmingdale, NY 11735
Dec 01, 2004 Flexionâ„¢ system suits situations where sensing edge is required to curve laterally. Interlinked mounting channel provides flexibility to follow natural contours of an application. Typical applications include curved sliding doors, medical tables, S-curve enclosures, and contoured pinch points. Each sensing edge has continuous length of sealed ribbon switch encased in extruded housing. It is water and chemical resistant.

Cerro Flow Products, Inc.    St. Louis, MO 63166-6800
Dec 01, 2004 Exact Straight Length (ESL) Copper Tube is delivered to HVAC/R OEMs, mechanically straightened and cut to precise and specific lengths for production of heat exchangers, chillers, and heaters. Lengths run from 10 in. to 25 ft. with 3/16–1 in. OD. Tube is available in tempers of H58 drawn, H80 hard drawn, 050 light anneal, and 060 soft anneal that meet ASTM specifications B68 and B75. ESL is available as light anneal rotary straightened tubes in ¼â€“1 in. OD.

EFD Inc., Solder Paste Group    Lincoln, RI 02865
Dec 01, 2004 Colorless, no-clean P520 Flux leaves clear residue for cosmetic joint finish. Printed or dispensed solder paste deposits retain shape through reflow cycle without slumping or bridging, making flux suited for fine pitch, no-clean electronic and electro-mechanical soldering applications. Flux is environmentally safe and exceeds IPC Joint Industry Standards J-STD-004A.

FCI Electronics    Etters, PA 17319 9769
Dec 01, 2004 Board-level retention mechanism for PCI Express graphics cards protects against electrical interrupts and mechanical damage caused by system-level shocks and vibration. Flexible arm extends away from slot and includes molded post that snaps into notch on bottom of add-in card. Device solders to motherboard adjacent to x16 PCI Express card edge connector, and engages with hockey stick shaped hook on bottom of graphics card.

NKK Switches    Scottsdale, AZ 85260-3420
Dec 01, 2004 PCB-mount M series features bias guard that prevents misalignment of contacts, interlocking of actuator block with rocker, and internal guide that does not allow transmission of diagonal force on actuator to reach contact mechanism. With mechanical life rated at 50,000 operations min, series is offered in 1-4 poles with multiple circuit configurations, including momentary and maintained action. Switches can be specified with power, logic level, or dual ratings.