Renishaw, Inc.    Hoffman Estates, IL 60192
Dec 10, 2004 Signum(TM) RESM Rotary Ring Encoder delivers speeds to over 3,600 rev/min and accuracy to ±0.5 arc sec, with resolution and repeatability to 0.02 arc sec. Signum(TM) software enables real-time system diagnostics via PC's USB port. IN-TRAC(TM) optical reference mark, embedded in scale track, is repeatable in both directions at operational speeds over 3,600 rev/min. Rated for temperatures up to 85°C, RESM comprises low-profile ring, SR readhead, and Si interface.

Zero-Max, Inc.    Minneapolis, MN 55441 5537
Dec 10, 2004 Single-disc Model SD005 and double-disc Model SC005 are 16 mm in diameter with operating torque of 4.43 lb-in. and maximum speed of 10,000 rpm. Suited for miniature servomotor systems, units feature zero-backlash, flexible metal stainless discs, and keyless clamp-style mounting hubs. Model SD005 provides smaller package with greater torsional and axial stiffness than Model SC005 that allows for small amounts of parallel misalignment.

Ultraflo Corp.    Sainte Genevieve, MO 63670
Dec 10, 2004 Series 410/412 offers bi-directional, bubble-tight shut-off pressure rating of 150 psi, and resilient seat design, which provides full isolation of body parts from line media. Featuring wafer style body, Model 410 ranges in size from 24–36 in., while Model 412 offers double flanged style body and is available from 24–48 in. Valve bodies come in cast and ductile iron, cast steel, and stainless steel and comply with ASME/ANSI 125/150 flange drilling standards.

TURCK, Inc.    Plymouth, MN 55441
Dec 10, 2004 Rod style, non-contact EZ-track Model R10 uses magnetostrictive technology to monitor position of hydraulic cylinders. Sensors are 13.5–30 Vdc units with variety of analog outputs including voltage, current, and differential, which can be programmed over active stroke length of sensor. Utilizing 16-bit resolution, Model R10 can achieve repeatability to 0.001% of full stroke. Sensing rod is stainless steel and available in stroke lengths from 2–180 in.

ITT Industries Cannon    Watertown MA 02172
Dec 10, 2004 Offering lifecycle of more than 6 million actuations, Model AJ4 is environmentally-sealed to IP67 with potted electronics and redundant mode operation. It meets international standards including ISO 11452-2/5, IOS 7637-0 and SEA J1113/41. Suited for material handling, agricultural, and construction equipment, unit is fabricated in aluminum with operating voltage of 9-16 Vdc. Output options include 0.5-4.5 Vdc, 500 Hz for PWM and J1939 for CAN BUS.

Automated Packaging Systems Inc.    Streetsboro, OH 44241
Dec 10, 2004 Usable with AirPouchâ„¢ Express 3 Void-Fill System, AirPouch Pillows feature EZ-Tearâ„¢ perforations, which have 1 in. of regular perforation at each side of pillow, with clean cut through center of pillow. Perforations are strong enough to be pulled from bins or overhead hoppers, yet individual pillows can be easily separated for packing. Made of puncture-resistant, DuraClearâ„¢ material, standard pillows come in 8 in. width and various lengths.

Dimas North America    Olathe, KS 66061
Dec 10, 2004 Utilizing Cummins 85 hp turbocharged diesel engine, Model RS 8500 delivers travel speeds up to 4 mph with zero turn radius for accurate alignment and cutting. It features 26 in. blade and inline right angle gearbox that uses 14 belts. Upcutting blade rotation lifts slurry from cut. Sealed bladeshaft assembly operates 250+ hours before needing to be greased. Single-handle control facilitates forward and reverse travel, as well as blade raising and lowering.

KEP Co. - Kessler-Ellis Products Co.    Eatontown, NJ 07724
Dec 10, 2004 Infilink-HMIâ„¢ v4.06 operator interface solution provides users with ability to import windows from other projects, edit users in run mode, import animated GIF images, and telephony and text-to-speech (TTS) scripting. TTS functionality lets Windows XP users read string tag over speakers, into PA system, or through telephone mode. Software provides real-time and historical trending, real and historical alarms, and data and alarm logging.

Rotex, Inc.    Cincinnati, OH 45223 1845
Dec 10, 2004 With screener refurbishing service, process includes disassembling entire machine; replacing or reconditioning all major components, including top cover, screen box, bottom pan, and screen frames; and reassembly. Refurbished machine is provided with features such as compensating clamps, automatic tensioning screen frame design, top cover design, and seals. Entire unit can be refurbished, or just major components. Work is backed by 1-year warranty.

Phillips Industries    Santa Fe Springs, CA 90670
Dec 10, 2004 STA-DRY® Slim-7â„¢ provides users with molded, 7-way connection suited for any heavy-duty trailer. Molded connectors between modules have ribs and o-rings that keep moisture and contaminants from penetrating electrical system. Integral design enables harness to be threaded through trailer configurations with tight areas, eliminating potential for unintentional disconnect.

Orbitform    Jackson, MI 49204
Dec 10, 2004 With life expectancy measured in years, Gold Series incorporates stack of angular contact bearings as primary forming element, increasing allowable thrust load. Able to handle short/long cycles, hard materials, and multiple production shifts, product features .005 in. runout accuracy and lubed-for-life bearings. It is suited for jobs that require additional capacity in smaller envelope, such as multi-spindle heads or close center applications.

Datron Dynamics, Inc.    Milford, NH 03055
Dec 10, 2004 With 51 x 51 in. footprint and 20 x 20 x 8 in. working envelope, miniRaptorâ„¢ uses granite machining table for minimal vibration. Features include 60,000 rpm spindle with 0.125 in. collet and 3-tool Automatic Tool Management Systemâ„¢. Product also includes PC with 256 MB RAM and 40 GB part/program storage, CD-ROM drive, 3.5 in. drive, USB port, 15 in. monitor, and hand-held controller. Ethernet networking capability enables remote monitoring.

Stackpole Electronics Inc.    Raleigh, NC 27604
Dec 10, 2004 Model CSR1/2 is rated to ½ W @ 70°C and has resistance values of .0005 ohm, in tolerances to 1%. Unit exhibits low inductance of less than 0.2 nH and has TCRs of less than ± 100 ppm/°C. It is rated for operation from temperatures of -55°C to 150°C.

Eubanks Engineering Co.    Monrovia, CA 91016
Dec 10, 2004 Model 2940 Large Cable Stripper employs pneumatic drive that provides power for stripping cross-linked polyethylene, Teflon®, Nylon, and other wrapped or extruded insulation. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force, and heavy-duty strip assemblies feature double-acting clamp cylinders. Unit uses die-type blades, is available with tooling for 2- and 3-stage stripping, and stores up to 1,000 programs.

Fondis S.A.    Thann Cedex 68801  France
Dec 10, 2004 Suited for use by restaurant and boutique owners, Wine SP100 enables superior grand cru wines to age in optimal conditions. It uses one 53 db unit installed inside cellar and one unit placed outside building linked by 16 ft flexible conduit. Product, designed for volumes of up to 3,000 ft³, features 2.5 kW refrigeration capacity, digital-display thermostat, and electronic regulation system for optimization of temperature and hygrometry.

ETIK OUEST    Challans Cedex 85303  France
Dec 10, 2004 Etik Tack® label creates airtight seal for all kinds of packaging and will not tear, enabling bags to be reopened and re-sealed over 10 times if needed. Seal remains airtight and can be affixed on packaging line in any position on bag. Product opens window to stop hinge, opening bag at same time. Label can be adapted for delicate films and used for blister trays as well as paper or aluminum packaging.

Cherokee International, Inc.    Tustin, CA 92780
Dec 10, 2004 Suited for equipment with distributed power architecture, DPS2000 adheres to SSI guidelines. Rated at 2,000 W, 48 V unit features active current sharing, hot-swap capabilities, N+1 redundancy, and I2C interface. Power-factor corrected unit meets EMI Class B regulations, measures 12.80 x 2.74 x 4.86 in., and is upgradeable via flash memory. With full load efficiency of 87%, it delivers 1,000 W at low-line 110 Vac and protects against over-temperature conditions.

United Air Specialists Inc.    Cincinnati, OH 45242 2832
Dec 10, 2004 Portable, all-purpose V Series captures smoke, dust, and powders resulting from manufacturing operations. Models capture and remove contaminants at source, minimizing hazards that result from improperly controlled air borne pollutants, and promote compliance with OSHA regulations. Series includes Model VB downdraft bench, Model VF self-contained airflow and filtration source, and portable Model VP. Each model is available 2 sizes: 750 or 1,500 scfm.

Worksaver Inc.    Litchfield, IL 62056
Dec 10, 2004 Grapple Rake uses dual independent upper grapples to clamp and hold uneven sized loads of material. Two 2 x 10 in. hydraulic cylinders open and close grapple. Available in 62 and 77 in. widths, split-top fits skid steers or tractor front loaders, picking up brush and other debris, while leaving dirt on ground. Tooth design allows materials to roll in front and is self-cleaning. Tines have replaceable weld-on points, allowing operator to get completely under logs and brush.

Stackpole Electronics Inc.    Raleigh, NC 27604
Dec 10, 2004 Housed in 2512 size package, Model CSRL2 is rated to 2 W at 70°C and has resistance values as low as .0005 ohm. It exhibits inductance of less than .02 nH and has TCRs of less than ±100 ppm/°C. Operating temperature is -55 to 150°C. In addition to portable electronic devices, unit is suited for current-sensing and feedback circuits in disk drives, power supplies, automotive systems, and instrumentation.