Aerotech, Inc.    Pittsburgh, PA 15238
Dec 30, 2004 Driven by Series BLM brushless linear servomotors at speeds of 1 m/sec and accelerations of 0.5 g, Model ABG10000 provides feedback via non-contact optical linear encoder. It incorporates active preload on vertical and horizontal surfaces, and opposing thin-film pressure maintains bearing nominal gap tolerance. Magnetically preloaded and assembled, turnkey product has cable management system and modular design that distributes load over surface area.

Kanguru Solutions    Millis, MA 02054
Dec 30, 2004 With plug and play capabilities, palm-sized Kanguru Mini Drive functions as portable storage solution for mobile users and provides alternative to external hard drives. It is manufactured in aluminum housing, weighs 21 g, and resists up to 1,000 Gs of shock. Able to store up to 1 Gb of data, 480 mbps drive requires no external power and works with Windows, Macintosh, and Linux operating systems.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Dec 29, 2004 Measuring 0.275 x 0.197 x 0.63 in., surface-mount Models XOSM-571 and XOSM-572 offer frequency range of 1–100 MHz with frequency stability options of ±25, ±50, and ±100 ppm. Tri-state enable/disable function contributes to efficient operation. Lead-free oscillators are HCMOS-compatible and compatible with IR re-flow processes. They are suited for portable computing and telecommunications equipment such as notebook computers, cell phones, pagers, and PDAs.

Pacor Inc.    Cinnaminson, NJ 08077
Dec 29, 2004 Available in white and black, Manniglas® 2000 and 2002 can be die cut, producing clean edges for gaskets and seals. They also laminate to foil carriers and PSAs for thermal protection and to facilitate assembly. Both types are non-corrosive and mildew resistant. In applications where prevention of contamination is essential, Manniglas 2002 is preferred. Materials are available in standard thicknesses of .030, .060, .125, and .250 in.

Elma Electronic Inc.    Fremont, CA 94538
Dec 29, 2004 In 7U form factor, 14-slot Dual Star AdvancedTCA backplane features Dual Star topology and redundant plug-removable connectors. Compliant to PICMG 3.x specifications, fully pluggable unit has 12-layer controlled impedance design with 2 fabric slots. Boards with similar functions can communicate via Update Channel Interface. Backplane features Gigabyte/Terabyte per second bandwidth across each shelf, 150-200 W per board, and 3 kW per chassis power.

Linear Technology Corp.    Milpitas, CA 95035
Dec 29, 2004 Operating from 4-30 V input supplies, 2-phase, step-down Model LTC3709 eliminates voltage errors introduced by PCB traces and high load currents. Integrated differential amplifier measures output voltage directly at load and compensates for voltage drop error. Suited for driving N-channel MOSFETs, controller delivers up to 40 A to loads as low as 0.6 V. It can operate from 2-90% duty cycle at 200 kHz to convert input voltages ranging from 4.5-28 V to 2.5 V output.

CAD CAM Solutions    Marlborough, MA 01752
Dec 29, 2004 CAD-CAM v19 incorporates Wire Frame, Surfaces, and Solids into one, giving user ability to create clean tool path and accurate g-code programs for imported surface or solid type files. CAM functionality includes customizable tool libraries and canned cycles, as well as customizable drilling cycles through visual basic scripting technology. Offering 2- and 4-axis programming capabilities, BobWIRE v19 lets users draw parts for Open and Closed shape wire cut profiles.

Superior Industries Of Morris    Morris, MN 56267
Dec 29, 2004 Fully programmable, 190 ft TeleStacker Conveyor Model TS-190 is equipped with swing axle assembly and can build fully or partially desegregated stockpiles in any configuration. It enables producers to stockpile in-spec materials where real estate is limited. Conveyor provides stockpiling method alternative to haul trucks and loaders, eliminating multiple handling and associated labor.

Scapa North America    Windsor, CT 06095
Dec 29, 2004 Bioflex Rx232V-60 is soft white polyethylene foam single-coated with medical grade acrylic pressure-sensitive adhesive that carries Drug Master File Number. Medical-grade product removes cleanly from skin without causing trauma, making it suited for use in medical device assembly or direct skin contact applications such as ECG electrode fabrication and specialty bandage production.

Acton Research Corp.    Acton, MA 01720
Dec 29, 2004 Broadband Anti-Reflection Coatings can be applied to lenses, windows, and CCDs to minimize second surface reflections. Optimized for 450–650 nm, Model 450-650-BBAR provides less than or equal to 0.6% average reflection per surface. Model 400-700-BBAR is optimized for 400–700 nm and provides less than or equal to 0.8% average reflectance. Coatings meet MIL-Spec requirements for humidity, mild abrasion, and tape tests.

Raymond Corporation, The    Greene, NY 13778 0130
Dec 29, 2004 Offering lift heights up to 270 in., Reach-Fork® 24 V Truck features capacities of 2,500, 3,000, 3,500, and 4,000 lb. It has 14 in. battery compartment and uses AC drive motor for optimal runtime. Ergonomic features include Universal Stance design; logical, intuitive controls laid out in comfortable configuration; and contoured padding for weight relief. Spring suspension and inertial dampener minimize shocks and sways in operator's compartment.

EPIX, Inc.    Buffalo Grove, IL 60089 6934
Dec 29, 2004 SILICON VIDEO® 9T001C includes 1.5 x 1.9 in. machine-vision camera, PIXCI SI PCI bus frame grabber, RJ-45 cable, and XCAP-Lite software. With 2048 x 1536 max array resolution at 10 bits per pixel, 3 MP system has PIXCI SI PCI interface that supplies power, programmable pixel clock, exposure control, trigger input, and strobe output. Programmable area of interest and programmable pixel clock allow frame rates from 12–65 fps at respective resolutions from 2048 x 1536 to 800 x 600.

Wanner Engineering, Inc.    Minneapolis, MN 55403
Dec 29, 2004 Series H/G25 Kel-Cell® uses DPC technology to control diaphragm position under adverse inlet conditions. This reduces possibility of incidental diaphragm failure/rupture caused by conditions that result in excessive vacuum conditions on pump inlet. Industrial pump provides flow to 20 gpm and pressure to 1,000 psi.

Ezell Precision Tool Co.    Clearwater, FL 33762 4420
Dec 29, 2004 Custom Ejector Sleeves can be machined from H-13, A10, S-7, and M-2 tool steel, as well as 420 and 440 stainless steels, with 0.0002 in. accuracy on ID and OD and surface finishes to 2 RMS. Sizes range from 0.016 in. ID to 2 in. OD in lengths up to 14 in. long, with or without shoulders. Customized with EDM forms, vent grooves, ribs, and other special requirements, sleeves can be supplied with surface treatments including various nitride processes and plating.

Worksaver Inc.    Litchfield, IL 62056
Dec 29, 2004 Intended for compact tractor loaders, Compact Grapple is 60 in. wide with single 34 in. wide upper grapple that is controlled by 2 x 8 hydraulic cylinder. Shield plate between middle upper tines protects cylinder. Produced from 5/8 in. thick material, lower tines are 15 in. apart to pick up brush and other debris, while leaving dirt on ground. Compact Grapple is suited for clearing brush, loading downed limbs, and handling landscaping debris.

Stanley Vidmar    Allentown, PA 18105 1151
Dec 29, 2004 Mobile Workcenter FOD Cabinet has drawers with foam inserts that feature cut profiles for individual tools. Inserts make tool absence evident and protect tools. Unit comes with one wide drawer, located below cabinet surface. Mix and match options include 2 banks of drawers or one bank of drawers and cabinet with hinged door. Each drawer holds up to 400 lb and glides on roller-bearing carriage system. Casters are available to hold up to 1,200 lb.

Athena Controls, Inc.    Plymouth Meeting, PA 19462 1129
Dec 29, 2004 Modular K Series includes models K-10 and K-20 for monitoring up to 60 and 120 zones, respectively. Component options include control cards with or without current measurement, touchscreen consoles, and cabinets with interlocked card access door. Control board LED indicators are visible through front-door window for diagnostic capability, and up to 20 tool settings may be stored. Event Log captures all fault alarms and setting/configuration changes.

Ruthman Pump & Engineering    Williamstown, KY 41097
Dec 29, 2004 Vertical Multi-Stage Series MS5-4x4-SEL-CDM-ADP has flow rates up to 500 gal and is capable of heads up to 700 ft at 1,750 rpm. Available in stainless steel, pump features one-piece shaft, depths to 20 ft, and no seals. It offers extra stages for higher pressures. Applications include industrial washers, filtration systems, chemical plants, power plants, machine tools, spray booths, and phosphate systems.

Datatronics    Romoland, CA 92585 8916
Dec 29, 2004 Suited for dc/dc converter applications, Series CT meets European Directive 20002/95/EC requirements requiring use of lead-free solder and elimination of cadmium and mercury. It has 6 mm² SMT design with 4 mm seated height and is available with turn ratios from 1:20–1:200. Performing optimally at frequencies of 100 kHz and above, series features 100–11,000 mH inductance range, 0.50–27.50 ohms max resistance, and 500 Vrms min isolation voltage.

Schleuniger, Inc.    Manchester, NH 03103
Dec 29, 2004 CableCoiler 500 handles various wire and cable types as they exit from upstream cutting and stripping machines. Optical sensor, used to interface with cutting and stripping machine, provides speed information used to synchronize coiling pan speed with speed of wire or cable being coiled. Unit is supplied with 12 in. dia coiling pan.