Kaspar Wire Works, Inc.    Shiner, TX 77984
Jan 06, 2005 With base, Model TK-98-FP measures 45 3/8 in. x 24 in. x 20 in. and has 16 in. paper capacity for paid publication and 12 in. for free publication. Measuring 42 x 17¾ x 14½ in., Model DD-2 offers paper capacity of 13 in. on top for broadsheet, and 17 in. on bottom for tabloids. Model TK-106 measures 54½ x 24¼ x 20½ in. with 3 divided honor spaces and paid top rack capacity of 17 in. Modular MN-50 offers shelving options for broadsheet, tabloid, magazine, and free publications.

Aviel Electronics    Las Vegas, NV 89118
Jan 06, 2005 Constructed with stainless steel, brass, or aluminum bodies, unique coupling connectors are designed for antenna connections requiring compliance with Part 15.203 of FCC regulations. Products can be completely custom units, modified versions of standard connector interfaces, or standard reverse polarity interfaces. Flange mount, crimp, and compression cable mounts can be used with uniquely interfaced connector pairs to prevent component mismating. Coded pairs are also available.

Protek Test & Measurement    Englewood, NJ 07631
Jan 06, 2005 Battery operated Model S2405 provides users with 2-channel, multifunction DSO/DMM with 5 MHz bandwidth and 50 mV to 500 V vertical sensitivity range. Portable scope/meter has DSO section with 8-bit resolution and record length of 512 bytes for single shot/glitch capture and 256 bytes for other modes. As 4,000 count DMM, unit offers built-in auto/manual ranging as well as measurement capabilities. Equipment includes an RS232 port with software.

Highlites, Inc.    Waterbury, CT 06704
Jan 06, 2005 Consuming 4 W, Series ZBLED employs indirect illumination system that clearly marks building exits for commercial, institutional, and industrial environments. High-intensity red or green LEDs are not visible from looking at stencil cutout, yet signs provide contrast and clarity. Available in ac-wired or with self-powered battery backup, units can be wall-, end-, or ceiling-mounted. Canopy and second-face convert ZBLED units into double-faced exit signs.

Fisnar Inc.    Wayne, NJ 07470
Jan 06, 2005 Model SV1000SS provides finely controlled spray for low-medium viscosity fluids and coatings. Transfer efficiency is maintained by dual air-control system provided by spray valve controller. Piston-activated needle opens material inlet under low pressure, and secondary pressure source forces air around nozzle to produce spray. At end of operation, needle closes but secondary air remains on momentarily to clean outlet nozzle and provide positive cut-off.

Hayward Industrial Products Inc., Hayward Filtration    Elizabeth, NJ 07207
Jan 06, 2005 Offered in 4 models with filtration efficiencies from 95-99%, ACCUGAF(TM) Series 500 Filter Bags feature all-welded, multi-pleated construction. Filtration layers remove difficult to filter gels and deformable particles. Made from 100% pure polypropylene materials, LOFCLEAR(TM) filter bags contain no leachables or lubricants that could contaminate sensitive process medias. They are suited for removing gelatinous materials as well as oil.

Laitram Corp., The    New Orleans, LA 70150
Jan 06, 2005 Model FC300 cooks PTO (peeled, tail-on) and other peeled shrimp by allowing infeed of shrimp in trays or in bulk. Forced convection process cooks shrimp at temperatures below 100°C in order to have shrimp retain natural moisture and flavor. Use of cooker also results in reduced curl.

Acoustical Solutions, Inc.    Richmond, VA 23228
Jan 06, 2005 Sound Sealant achieves and maintains specific STC (Sound Transmission Class) value of wall partition systems. Non-flammable, latex-base product is permanently flexible and adheres to wood or metal studs, concrete, gypsum board, AudioSeal Sound Barrier, and other building substrates. Formulation is non-drying, non-hardening, non-staining, and non-migrating. It comes in 29 oz cartridge that covers ~40 linear feet with 3/8 in. bead.

STMicroelectronics    Lexington, MA 02421
Jan 06, 2005 With support for DVB-S2 specification as well as DVB-S standard, STB0899 is built using 90 nm process technology and enables deployment of high data-rate applications such as HDTV, broadband Internet, and interactive services. Up to 8 input signals can be combined onto one coaxial cable. Product supports normal QPSK (quadrature-phase-shift-keying) and 8PSK modulation as well as DVB-S2 pilot processing and DiSEqC 2.0 specification.

Softelec    Munich D-80995  Germany
Jan 06, 2005 Featuring surface design in Windows XP style, VPHybridCAD v8 supports AutoCAD 2005 and AutoCAD LT 2005. It includes collection of function groups, such as dimensions, customizable user workflows, element quick selection, and raster table recognition. With VPHybridCAD v8, users can create and edit multipage TIFF documents. Color processing functions are available for CAD and standard raster drawing applications.

nLayers, Inc.    San Jose, CA 95110
Jan 06, 2005 InSight Software Development Kit helps users integrate infrastructure discovery, modeling, and application optimization capabilities into management solutions. It automatically discovers and maps relationships and dependencies between applications and infrastructure components to provide time-based living model that tracks IT resource dependencies, demand, usage, and service levels over time. Running on J2EE engine, software can stream XML data to any destination.

UTStarcom    Alameda, CA 94502
Jan 06, 2005 SIP-enabled F1000 allows users to make calls from anywhere Wi-Fi hot spots exist, domestically and internationally. Handset combines features and functionality of VoIP terminal adapter with cordless telephone. With form factor similar to cellular phone, unit incorporates power management features that enable talk time of 3–4 hr. Unit features capabilities for 3-way calling, call waiting, and call transfer and enables voice processes and IP protocol features.

ITT Industries    Newton, MA 02458
Jan 05, 2005 Model SFP-155E delivers full duplex STM-1 electrical SDH transport over coaxial cables at 155 Mbit/s and is fully interchangeable with STM-1 optical SFP modules. Electrical interface is compliant with telecom ITU-T G.703 recommendations and can be connected using standard DIN 1.0/2.3 75-ohm cable connectors. Hot-pluggable transceiver is suited for SDH add/drop multiplexers, optical edge devices, MSPP, and switching systems.

Misumi USA    Schaumburg, IL 60173
Jan 05, 2005 Welded and Cast Stand-Offs are offered in carbon steel and aluminum for industrial applications, as well as in stainless steel for medical and semiconductor automation processes. Units feature parallelism accurate within .002 in. over 6 in. run. They come in standard sizes or in configurable sizes to 0.010 in. increments, with riser plates and custom hole patterns or surface treatments also available.

American Power Conversion    West Kingston, RI 02892
Jan 05, 2005 Weighing less than 28 oz, Universal Notebook Battery offers 15–24 V options that users can set via rotary voltage switch. Input/output power port provides way to charge and power battery using laptop's power adapter, while thermal management features allow battery to operate inside notebook cases. Additional mobile products include retractable telephone and network cables, optical travel mouse, USB battery extender, and surge protector.

Balluff, Inc.    Florence, KY 41042-0937
Jan 05, 2005 Self-contained BWL L-shaped Sensors have infrared emitter in zinc-plated steel housing that can resist multiple impacts without loss of function. IR light beam cuts through heavily contaminated air with ample reserve capacity. Three sizes are available, with optical axes ranging from 22–42 mm. Sealed to IP67, one-piece plug-and-play sensors feature pre-aligned optics. Maximum response time is 0.5 ms and switching frequency is 1,000 Hz.

Fernqvist Labeling Solutions    Mountain View, CA 94043
Jan 05, 2005 Label/bar code printer, Model LX800 provides digital 4-color process printing on label rolls. It prints labels in widths up to 8 in. on media up to 8.25 in. wide at max rate of 2 ips for black or 1.5 ips for colors and black, with feed through rate of 10 ips. Print resolution is 4,800 x 1,200, 2,400 x 1,200, or 600 x 600 dpi. Ink Level Warning calculates actual number of prints remaining based upon ink usage of graphics being printed.

Aaeon Electronics, Inc.    Hazlet, NJ 07730-2496
Jan 05, 2005 Powered by Socket 478 based Intel Pentium 4 and Celeron Processors up to 3.06 GHz, APC-8172 and APC-8152 have respective 17 in. SXGA (1280 X 1024) and 15 in. XGA (1024 x 768) color TFT, LCD displays with 350 nit brightness. Industrial panel PCs incorporate 16 digital I/O, 2 PCI expansion slots, and water-proof front panel. Along with 5 USB 2.0 ports, PCs provide onboard Ethernet; 4 serial ports; and space for CD-ROM, FDD, HDD, and DiskOnChip® flash disk socket.

ABB Inc.    Wichita Falls, TX 76302
Jan 05, 2005 With all functions condensed into one unit, Compact Emergency Stop Pushbuttons are offered with 30 or 40 mm mushroom operating heads with twist, pull, or key release. Products have built-in depth of 42 mm and are available with 1 or 2 built-in, electrically separated, self-wiping contacts in various NO/NC configurations for E-Stop functions. Vandal-proof units are designed and approved to IEC 947-5-5 safety standard.

BEVCO Ergonomic Seating    Waukesha, WI 53186
Jan 05, 2005 Value-Line Series of upholstered and polyurethane seating includes chairs and stools suited for use in situations that require basic chair/stool functionality. All models have waterfall fronts on seats, tilt back controls with adjustable tension control, and pneumatic seat height adjustment. Products are ANSI/BIFMA certified and meet flame retardant standards of California Technical Bulletin 117. Carpet or hard floor casters are available.