IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jan 27, 2005 Offering 10 Gb Ethernet PCI-X-based server connections over max distance of 10 km, 10 Gigabit Ethernet-LR PCI-X Adapter (No. 5719) conforms to IEEE 802.3ae standard and supports jumbo frames up to 16 KB. Product has 32 KB on-chip TX and 256 KB on-chip RX packet buffers. No. 5723, 2-Port Asynchronous EIA(TM)-232 PCI adapter offers Asynchronous Serial PCI-based server connections EIA-232 to networks and devices. It provides users with 32-bit data and addresses up to 33 MHz.

Agere Systems    Allentown, PA 18109-3286
Jan 27, 2005 Chip set and software solution for mass market, dual-mode UMTS/EDGE multimedia mobile handsets enables seamless handovers between 3G/UMTS and 2.5G/EDGE networks. W-EDGE technology provides broadband cellular access at up to 384 kbps in 3G/UMTS coverage areas and up to 220 kbps in 2.5G/EDGE coverage areas. Integrating dual-mode software core based on GPRS and EDGE protocol stack, Sceptre® HPU solution supports 800/850/1800/2100 MHz frequency bands.

Foundry Networks, Inc.    San Jose, CA 95164-9100
Jan 27, 2005 SuperXâ„¢ Series features hardware-based switching packet processor and switch fabric, Layer 2 features, and ugradeability to full Layer 3 for demanding network environments. Offering non-blocking architecture, units include hot swappable ac/dc power supplies, fine-grain bandwidth management, and traffic monitoring. Six RU high switches support up to 128 wire-speed 10-GbE ports, 1,632 wire-speed GbE or 10/100/1000 ports, and 1,536 wire-speed 10/100/1000 PoE ports per rack.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jan 27, 2005 Ten Gigabit Ethernet-SR PCI-X adapter provides short-reach connections up to 108 ft on shortwave multimode optical cable, while 10 Gigabit Ethernet-LR PCI-X adapter suits long-reach connections up to 6 miles. Both offer 128K x 8-bit boot flash ROM support, 32 Kb on-chip TX packet buffer, and 256 Kb on-chip RX packet buffer. Two-port EIAâ„¢-232 PCI adapter provides asynchronous serial PCI-based server connections EIA-232 to networks and devices.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jan 27, 2005 Desktop HMC Model 7310-CO4 allows user to configure and manage partitions and Capacity on Demand on POWER5â„¢ servers. Operating system console support is provided for eserver i5/OS using 5250 programming interface. Console lets user create and store LPAR profiles that define processor, memory, and I/O resources allocated to individual partition. It delivers boot, start, stop, and reset actions for system partition, and also displays system and partition status.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jan 27, 2005 IBM 7315-C04 Desktop Hardware Management Console provides users with dedicated system unit for configuring, controlling, and operating multiple pSeries® POWER4â„¢ servers in SMP, LPAR, or clustered environments. Console enables creation and storage of LPAR profiles that define processor, memory, and I/O resources allocated to each partition. It delivers boot, start, stop, and reset actions for system partition, and can display system and partition status.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jan 27, 2005 Available in one- or 2-way configurations, eServer® OpenPowerâ„¢ 710 comes in rack drawer package with 4 front-accessible, hot-swap-capable DASD bays that accommodate up to 587.2 Gb of disk storage. Fifth bay is provided for DVD-ROM or DVD-RAM. SMP uses 64-bit, copper-based POWER5â„¢ microprocessor running at 1.65 GHz with 36 Mb L3 cache. Features include three 3.3 V, 133 MHz, 64-bit PCI-X slots and 10/100/1000 Ethernet, serial, USB, and HMC ports.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jan 27, 2005 Model 7310-CR3 rack-mount Hardware Management Console (HMC) provides users with dedicated workstation for configuration and management of partitions and Capacity on Demand on POWER5â„¢ servers. It offers focal point for system control, enabling users create and store LPAR profiles that define processor, memory, and I/O resources allocated to individual partitions. Multiple processor-based servers, local or remote, are supported by one HMC.

Lexmark International, Inc.    Lexington, KY 40550
Jan 27, 2005 Suited for businesses of all sizes, Document Solutions Suite 3.3 offers choice of color or monochrome, printer-based or server-based, electronic forms. Electronic forms such as pharmacy prescriptions, shipping labels, or purchasing invoices can be seamlessly delivered to Lexmark forms server or to printer to be merged with customer's specific data. Forms Card allows data and forms to merge within Lexmark printers and MFPs.

SSH Communications Security Corp    FIN-00100 Helsinki   Finland
Jan 27, 2005 Integrating Secure Shell protocol for IBM mainframes, SSH Tectia(TM) Server is designed to run native on IBM z/OS® platform. It provides IBM mainframe users with comprehensive enterprise security, including secure system administration, secure application connectivity, and secure file transfer functionality. Server supports SSH2 terminal access and SFTP2/SCP2 based file transfers. It operates across all major IT platforms, including Windows, UNIX, and Linux.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jan 27, 2005 IBM 7315-CR3 rack-mount Hardware Management Console (HMC) provides dedicated system for configuring and operating multiple pSeries® POWER4â„¢ servers in SMP, LPAR, or clustered environments. Console enables creation and storage of LPAR profiles that define processor, memory, and I/O resources allocated to each partition. It delivers boot, start, stop, and reset actions for system partition, and can display system and partition status.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jan 27, 2005 IBM TotalStorage® Productivity Center v2.2 helps simplify and automate management of storage devices, data, and storage networks. Offering unified, capacity-based pricing, integrated storage infrastructure management solution combines base IBM TotalStorage Productivity Center for Data product with IBM Tivoli® Storage Resource Manager for Chargeback and IBM Tivoli Storage Resource Manager for Databases into one offering.

DDH Software, Inc.    Wellington, FL 33414
Jan 27, 2005 HanDBase Online Runtime Builder enables users to create Windows Desktop PC companions for handheld runtime solutions. Desktop companion offers full support for editing databases, filtering, searching, and browsing, as well as features for importing and exporting data to other file formats. Customers can interface with synchronization conduits to provide bi-directional data synchronization between handheld and desktop, and desktop database management systems.

Transition Networks, Inc.    Minneapolis, MN 55344
Jan 27, 2005 Suited for point-to-point implementations, Transport MUX can transport multiple T1/E1 lines, 10/100 Ethernet, and RS232 Data Channel over single pair of fiber or single fiber strand. It provides copper connections compatible with G.703, AMI/B8ZS/HDB3, 10/100BASE-TX, as well as RS232 channel; while optical channel will run at 155 Mbps. If fault condition occurs, Automatic Link Restoration ensures that no user intervention is required to bring link back up again.

Funk Software Inc.    Cambridge, MA 02142
Jan 27, 2005 Steel-Belted Radius® v5.0 lets enterprises enforce uniform network access security policy across variety of access methods. Administrators can centrally manage all remote/VPN, WLAN, and wired 802.1X users and equipment. Reports detail statistics on user authentications, failed authentications, unknown client devices, and temporarily disabled accounts. User and device profiles can be implemented with copy-and-paste, sorting, and point-and-click drilldown capabilities.

LogiGear Corporation    Foster City, CA 94404
Jan 27, 2005 TestArchitectâ„¢ v2.0 toolset for software test design, automation, and management combines keyword-driven Action Based Testing with test library management structure optimized for distributed teams. With spreadsheet interface and reporting features, software lets users create and maintain libraries of manual and automated test scripts. It offers scriptless Windows and Web automation as well as support for automation script libraries written in third-party languages.

Actel Corp.    Mountain View, CA 94043 4655
Jan 27, 2005 Libero 6.1 Integrated Design Environment is optimized for flash-based ProASIC3 and ProASIC3E devices, and delivers efficient and seamless flow through simulation, synthesis, and place-and-route. Technology enables designers take advantage of on-chip FlashROM function, which can be programmed independent of the FPGA core. Applications include device serialization, Internet protocol addressing, and version control.

LMT-Fette    Cleveland, OH 44135
Jan 26, 2005 Series SBR features fine radial adjustment for hole accuracy and compensation after regrinding. Two-point cutter clamping ensures precise support for cutting inserts. In addition to extra-wide guide strips consisting of ultra-fine grit carbide, reamers come equipped with coolant valve, making machining of blind- and through-holes possible with one tool. Internal coolant supply can be controlled by turning routing valve.

Molex Inc.    Lisle, IL 60532-1682
Jan 26, 2005 Suited for full system channel optimization, GbXâ„¢ FR408â„¢ Reference Backplane Demonstrator provides users with multi-variable system design tool. It incorporates different routing designs, multiple antipad and launch styles, and plated through hole stub lengths. Also built with various differential PCB channel lengths, product lets designers manipulate key design variables that influence transmission quality from transmitter to receiver.

Delcam USA    Salt Lake City, UT 84111
Jan 26, 2005 FeatureCAM's Machine Simulation lets users view machine movements and detect any possible collisions, ensuring clean operation. If collision is detected, simulation pauses, and dialog box appears with information on specific components involved. Able to illustrate simulations for machines from 2-axis mills to 5-axis tilting head machines, software lets users incorporate additional options such as having tool changer shown in simulation during tool changes.