Leco Corp.    St. Joseph, MI 49085 2396
Mar 15, 2005 TruSpec® Elemental Determinator utilizes DI-PAL Liquid Autosampler for seamless automation of liquid analysis. Autosampler kit is recommended for applications with low viscosity such as waters, beverages, slurries, urea, and light oils. It includes everything needed to mate to TruSpec, in addition to necessary software updates. TruSpec is available in choice of Nitrogen, combined Carbon/Nitrogen, and simultaneous Carbon/Hydrogen/Nitrogen configurations.

Honeywell Sensing and Control    Golden Valley, MN 55422
Mar 15, 2005 Featuring Wheatstone bridge construction, silicon piezoresistive technology, and ratiometric output, Series HPX is suited for applications using non-corrosive, non-ionic working fluids. Gage devices come in 6-pin Dual-Inline package, while absolute devices come in 8-pin, surface-mount SOIC package. Both are non-amplified and non-calibrated. Units offer pressure ranges from 0-100 psi, operating temperature of -40 to 257°F, and response time of 1 ms.

Fluid Components Intl.    San Marcos, CA 92069 5115
Mar 15, 2005 Series ST75 measures and monitors air or gas flows in line sizes from 0.25–2.0 in. and provides outputs of mass flow rate, totalized flow, and media temperature. It combines non-clogging, thermal dispersion sensing element with microprocessor-based electronics. Unit services flow range from 0.008–839 scfm and provides ±2% of reading accuracy with ±0.5% repeatability. It is enclosed in all-metal, dust- and water-resistant, NEMA 4X rated package.

Haas Automation, Inc.    Oxnard, CA 93030
Mar 15, 2005 Featuring built-in tombstone indexing capabilities, EC-300 HMC utilizes 8,000 rpm, 40-taper spindle directly coupled to motor. Unit incorporates servo-driven, twin 300 mm pallet changer that swaps pallets in under 5 sec as well as 45° incremental indexer that provides precise positioning for multi-sided parts and tombstones. With rapid traverse rates to 1,000 ipm, HMC features 20 x 18 x 14 xyz travels and 24-pocket side-mount tool changer.

Haas Automation, Inc.    Oxnard, CA 93030
Mar 15, 2005 Combining functionality of manual lathe with flexibility of CNC system TL-1 Toolroom Lathe offers 4 modes of operation: manual, semi-automatic, automatic, and full CNC. Intuitive Turning System uses full-color graphics on LCD, enabling operators to perform complex operations without knowledge of G-code programming. Machine employs A2-5 spindle nose and 7.5 hp vector drive spindle that spins to 1,800 rpm. Max cutting diameter is 16 in. and cutting length is 30 in.

Haas Automation, Inc.    Oxnard, CA 93030
Mar 15, 2005 Featuring cast-iron construction, VM-2 incorporates linear guides on all axes, brushless servos, fine-pitch ballscrews, and digital encoders. It uses 12,000-rpm, 40-taper, inline direct-drive spindle powered by 30 hp vector dual drive system. With max weight capacity of 3,000 lb, 36 x 18 in. table features T-slots in vertical and horizontal directions. Features include 30 x 20 x 20 in. work cube, 24+1 side-mount tool changer, and machining software with look-ahead.

Stedman    Aurora, IN 47001
Mar 15, 2005 Constructed with completely welded shell, cage mill with flash dryer handles temperatures up to 1200°F for de-lumping and drying of materials such as lime sludge, silica sand, copper concentrate, and gypsum with up to 40% moisture. Unit, able to be used with hot gas stream from within plant, controls moisture level of incoming feed to maintain 1–2% moisture level. Models 41, 67, 80, 89, and 104 offer capacities from 10–80 tons/hr.

Paragon Data Systems Inc.    Cleveland, OH 44115
Mar 15, 2005 Working with fully integrated PC, 1000e SM RFID Label/Inlay Applicator comes with color touch screen that lets operator edit data, control processes, run diagnostics, change setups, and track tags not yet coded, verified, or applied. SOFT TOUCH roller guide system handles fan-fold or roll stock. Machine also incorporates silk screened supply paths, dead tag management system, and auto-pressurization system with micron air filter.

Bivar, Inc.    Irvine, CA 92618 2593
Mar 15, 2005 Compliant with RoHS Pb-free materials/processes, Right Angle Model SRM-32 can replace PCB through-hole LED assembly displays. Measuring 2.4 x 3.2 mm, SMT unit is packaged with lens centerline 1.4 mm from PCB surfaces. It can be supplied with single, bi-color, or tri-color operation with either single or dual chip internal PCB. Unit offers peak wavelengths from 470–660 nm, axial intensity of 140–160 mcd at 20 mA, and forward voltage and current of 4.0 Vf at 20 mA.

nLight Photonics    Vancouver, WA 98665
Mar 15, 2005 Single-emitter, multimode diode lasers are available in operating wavelengths from 635–1,600 nm and output powers from 0.5–5 W, continuous wave. Lasers produce 25–30 mW per micron power density. Five watt device is a 200 micron broad area emitter at 808 nm, with operating current of 5,000 mA and compliance voltage of 1.95 V. Unit with 0.5 W output is a 150 micron broad area emitter at 635 nm. It features 1000 mA operating current and compliance voltage of 2.2V.

Mitsubishi EDM/MC Machinery Systems, Inc.    Wood Dale, IL 60191
Mar 15, 2005 Wire EDM Model FA10S features programmable flushing system, fine finish power supply, and non-isolated workpiece table. Sinker EDM Model EA12V includes multi-position work tank, which allows operator to set up while circulating dielectric fluid. ESPER II software offers multiple programs for measuring, power settings for burning, and orbital data for finishing. High-speed Model HC-658 VMC combines machining of mold steels and multi-purpose design for graphite machining.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Mar 15, 2005 RHINO Automatic Air Gun is intended for multi-gun finishing applications or fixed gun spray systems in ceramic coating and sanitary ware environments. Fluid nozzle and needle assembly are made from Perma-wear materials, while gun body assembly features Rhino Skin coating. Suitable for use as conventional spray or HVLP spray gun, unit includes removable mounting bracket, angled fluid inlet, sealed piston assembly, and complete wash down design.

Samtec, Inc.    New Albany, IN 47151 1147
Mar 15, 2005 Series SAL1 provides card-to-board interface for serial ATA(TM) and other high-speed daughtercard applications. Used in pairs, interconnects have beryllium copper contacts on .0394 in. pitch, and are designed to mate with .0625 or .094 in. thick cards. They can be mounted on same side of board or opposite sides for signal routing flexibility. Four pin counts are available with 20, 27, 30, and 40 I/Os per side. Pass-through interfaces are suited for multi-level board stacking.

Square D Co.    Raleigh, NC 27611
Mar 15, 2005 Based on IGBT technology and suited for welding equipment, REACTIVAR® HYBRID VAR Compensator provides real-time power factor correction, voltage support, and harmonic suppression in networks with highly cyclical load profiles. Unit offers 8 ms reactive current compensation for transient or cyclical loads, and infinitely variable control of reactive current. Heavy-duty dry capacitors provide no risk of fluid leakage, no environmental pollution, and no need for drip pans.

Even Cut Abrasive Co.    Cleveland, OH 44103
Mar 15, 2005 Radially mounted around metal shank or hub, Flap Wheels are manufactured from aluminum oxide resin bond abrasive. Wheels for hand-held power tool applications are supplied with 1/8 or ¼ in. straight round shanks or ¼â€“20 quick change threaded shanks. Shank mounted flap wheels range from 3/8–3 in. in diameter and 3/8–2 in. in width, while flap wheels with metal hubs range from ½â€“10 in. in diameter and 1–3 in. in width. Grit sizes from 40–320 are available.

Troemner, Inc.    Thorofare, NJ 08086
Mar 15, 2005 Ranging from 75 lb and up, Stainless Steel Heavy Capacity Weights are cylindrical in shape with flat, even top surface and secure eyebolt on top center. All have 2-piece design that allows weight to be adjusted. Stainless steel alloy possesses closely controlled density, low magnetic susceptibility, and resistance to handling damage. Weights are suited for cleanrooms and washdown environments, and can be supplied with NIST Traceable Certificate up to 3,000 lb.

NTE Electronics, Inc.    Bloomfield, NJ 07003
Mar 15, 2005 General-purpose Economy Model HG-001VT offers 2-speed motor, electronic variable temperature control from 250–1,100°F, and built-in safety handle. Industrial Grade Models HG-002/003/005 offer flameless heat, adjustable air intake regulator, and variable temperature adjustment from 200–750°F. Units are suited for heating and drying, as well as smoothing vinyl wrinkles and softening floor tiles. Diffuser nozzles with reflectors and concentrators are available.

CINTEC America Inc.    Washington, DC 20015
Mar 15, 2005 Waterwallâ„¢ Suspicious Object Isolator (SOI) is water inflated, rapidly deployable blast suppression device that isolates suspicious objects to protect both people and infrastructures. It reduces pressure behind blast wave, absorbs heat, and decreases or eliminates fragmentation. Open at top and bottom to facilitate deployment and for access to suspicious object, SOI is designed for use by first responders when addressing emergency situations.

AMETEK Dixson    Grand Junction, CO 81503 1900
Mar 15, 2005 Basic Universal Instrument Panel contains two 2 in. gauges with red warning LEDs, 3 in. speedometer, and 7-digit, multifunction LCD. UIP-MC (Message Center) upgrades to 5 in. speedometer and 2-line display and adds 5 in. tachometer. UIP-D (Graphic Display) features 128 x 128 pixel graphic display in addition to odometer, trip odometer, hourmeter, and diagnostic message displays. Users can also select from virtual gauges as well as fuel economy indicator.

Wall Industries, Inc.    Exeter, NH 03833 4556
Mar 15, 2005 Packaged in UL-approved fiberglass housing, PSA Series encapsulated, PCB-mount switching ac/dc power supplies feature regulated outputs, continuous short circuit protection, and operating range from -25 to +71°C. Products accept universal input of 90-260 Vac and are capable of delivering choice of single, dual, or triple outputs of 3.3, 5, 12, 15, or 24 Vdc. Depending upon model, series delivers 5, 10, 15, or 30 W of output power at efficiencies of up to 84%.