1Source Safety & Health, Inc.    Exton, PA 19341
Apr 24, 2012 Running on any computer, as well as Tablet PC with Touch Smart screen technology, SMARTouch helps users conduct, manage, and maintain ergonomic assessments, asbestos and lead in paint surveys, and indoor air quality assessments. Data collection consists of moving from tab to tab, clicking on drop downs, or tapping on field, ensuring consistency of data and descriptions regardless of surveyor. Pre-formatted and customizable reports are ready immediately after survey.

Borries Marking Systems    Ann Arbor, MI 48108 1623
Apr 24, 2012 Used to mark steel and other metals, electro-hydraulic AccuMarker features embossing head that can rotate 330°, illuminating diode that indicates maintenance and displays battery power level, as well as compact hydraulic power unit. Different standard tools can be inserted at top and bottom of C-frame, which has opening width that can be adjusted in increments of 5 mm up to 60 mm max. Portable tool comes in 3 power levels, providing marking forces of 18, 50, and 120 kN.

Sumner Mfg. Co.    Houston, TX 77088 4036
Apr 23, 2012 Intended for mechanical contractors, Model GH2T is available with cross beams in 8, 10, 12, and 15 ft sizes as well as 3, 4, and 5 m sizes. Two A-frames lock in folded position using plunger pins and feature removable quick action locking pin. With adjustable lifting handle, height adjustments can be made in 6 in. increments. Minimum and maximum heights from ground to lifting eye are 83 and 113 in., respectively, and maximum height to top of trolley is 113.5 in.

Super Micro Computer, Inc.    San Jose, CA 95131
Apr 23, 2012 Offering 1 GbE connectivity over 48x RJ45 ports and 4x SFP ports, SSE-G2252 and SSE-G2252P are IEEE 802.3az compliant Layer 2 switches designed for top-of-rack or standalone applications. Model SSE-G2252P is IEEE 802.3at-compliant and supports PoE. Offering networking options for data enter, cloud computing, HPC, and SMB environments, both switches provide choice of web-based GUI or CLI-based management as well as features such as jumbo frames, link aggregation, VLANs, and QoS.

Mate Precision Tooling    Anoka, MN 55303
Apr 23, 2012 Designed for Mate Original Style and AMX(TM) punch press tooling, RAPIDSET(TM) Canisters are suitable for punching material up to 0.250 in. thick. Units have non-rotating clamping head with adjustable clamping screw for setting punch length. Pre-loaded, self-contained spring pack provides consistent stripping pressure and consistent die penetration. Used with existing guides with or without pins, canisters offer grind life of 0.315 in. in 0.039 in. material with 0.118 in. die penetration.

Ergodyne Corp.    St. Paul, MN 55108
Apr 23, 2012 ProFlex® 925F(x)CP gloves employ technical, protective material (Armortex®) on entire palm to impart Level 3 cut and Level 2 puncture protection. Also, molded TPR armor on knuckles and fingers of dorsal side of hand protects from impact, pinch, crush, and bruising blows. Reinforced Kevlar® stitching promotes extended wear and durability; contoured neoprene cuff provide snug, comfortable fit; and silicone strips inside fingers keep glove in proper position.

Robert Bosch GmbH    Waiblingen D-71332  Germany
Apr 23, 2012 FLT vial filler features 100% checkweigh and reject option and processes up to 30 vials/min. Walking beam transport design allows for small footprint, and quick changeover of vial diameter requires only 3 guideparts. Stoppering or capping of 13 and 20 mm finish is realized with single vibratory bowl, requiring only change of tracks, and it handles containers ranging from 2-100 mm. Peristaltic or rolling diaphragm pumps are used for filling, with re-usable or single-use PreVAS product path parts.

OMEGA ENGINEERING LIMITED    MANCHESTER M44 5BD   United Kingdom
Apr 23, 2012 Featuring 4-wire construction and precision 100W class A platinum element, Pt100 Surface Temperature Sensors come in standard lengths from 1-5 m and are suited for use in temperatures from -30 to 150°C. Units have water-resistant silicon patch with aluminum strip and adhesive backing for secure mounting on flat or curved surfaces. One hour after application, sensor and adhesive resist moisture to IP67 standards, making sensors suitable for outdoor or wet environments.

MP Systems, Inc    East Granby, CT 06026
Apr 23, 2012 Combining chiller and high-pressure coolant system, Model S2 can be integrated with most types of CNC machine tools, including machining centers, turning centers, and Swiss-style lathes. PLC provides real-time monitoring, directs system to respond to changing conditions, stabilizes coolant to ±1° of ambient temperature, and includes 7-day timer clock. When used with water-based coolant, S2 pumps up to 1,000 psi at 8 gpm, and with oils, it reaches up to 2,000 psi at 5 gpm.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Apr 23, 2012 Designed to generate small, manageable chips, CoroDrill® 861 drills combine Advanced Chip Management flute geometry, point geometry that helps reduce thrust forces, and double-offset margin geometry that lends to stability. Consistent edge preparation protects cutting edge from premature chipping and flaking. Able to produce accurate, deep holes to depths of 12-30 x drill diameter without pecking, drills can achieve IT8-IT9 hole tolerance when used with suitable high-precision chuck.

Telehealth Sensors LLC    Batavia, IL 60510
Apr 23, 2012 Intended for home healthcare monitoring market, Adaptive Bed Sensor can be placed above or below most mattresses and is available as wired sensor. Product, which may also be adapted via wireless transmitter, has antimicrobial properties and uses nonslip, water-resistant material. Depending on customer requirements, sensor can be programmed to monitor activity during specific times of day or set to provide continuous monitoring.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Apr 23, 2012 Constructed with self-passivating tantalum nitride resistor film on high-purity alumina or ceramic substrate, NOMCA Series features low absolute TCR of ±25 ppm/°C, TCR tracking of 5 ppm/°C, tight ratio tolerances to ±0.05 %, and long-term ratio stability of 0.05% after 1,000 hours at +125°C. Dual in-line networks offer 7 or 8 isolated resistors of equal value in 14- or 16- pin SOIC packages. Each offers resistance range of 1-50 kW and typical power rating of 100 mW.

Americase    Waxahachie, TX 75165
Apr 23, 2012 Made of .080 in. thick aluminum, Aluma-Trans Luggage Compartment Weapons Locker securely mounts to floor or deck of law enforcement vehicles and is designed to facilitate access during emergency situations. Locker bolts underneath floor or rear deck and secures weapons via heavy-duty, pad-lockable twist latch that activates internal dual locking mechanism. Exterior measures 40 x 14 ½ x 9 in., and each fully padded interior compartment is 31 ¾ x 12 x 3 in.; custom builds are available.

Protex Fasteners Ltd    Redditch Herefordsh B98 8PA  United Kingdom
Apr 23, 2012 Available in zinc-plated mild steel or stainless steel, JCS Hi-Grip Worm Drive Hose Clips are suited for domestic, automotive, and industrial applications, or corrosive environments. JCS Hi-Torque Hose Clamps, made of stainless steel, are designed for tough and wire-reinforced hoses. Units feature Lloyds Type Approval for marine, offshore, and industrial use. With stainless steel JCS Multi-Torque banding and connectors, users can produce instant hose clamps to any desired diameter.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Apr 23, 2012 Designed to adhesively mount in confined spaces, Model 3225M39 teardrop IEPE accelerometer offers sensitivity of 10 mV/g, has overall height of 0.23 in., and weighs 0.95 grams. It features quartz shear sensing element in lightweight titanium housing and utilizes an integral three-foot coaxial cable assembly terminating to 10-32 jack. Device offers a broad frequency response range of 1.2-10,000 Hz, making it ideal for modal analysis and environmental stress screening applications.

Haydon Kerk Motion Solutions    Waterbury, CT 06705
Apr 23, 2012 Rated for 12-48 Vdc input voltage with continuous output current of 2.6 Arms/phase, Model DCM4826X supports rotary stepper motors or stepper motor-based linear actuators and can be configured for full step, half step, or microstep. Totally enclosed, bipolar 2-phase chopper drive package has 2.5 x 2.4 in. mounting plate with mounting hole center-to-center distances of 2.0 x 1.5 in. Configuration is through Haydon Kerk PDE User Interface via RS-485 protocol or computer USB port.

Mocon    Minneapolis, MN 55428
Apr 23, 2012 As combination testing system for packages with one-way degassing valves, MultiCheck® 425 measures headspace carbon dioxide (CO2) and oxygen (O2). System also performs pressure decay leak test, seal strength burst test, and one-way degassing valve performance test via Valve Test Unit(TM) (VTU). By combining 5 tests in one unit, product conserves time, labor, and samples needed to conduct individual testing; single package cycles through all tests on one unit.

Process Control Corp.    Atlanta, GA 30340
Apr 23, 2012 Available with up to 4 elements and up to 350 PPH, 1 kg Guardian® Series 2 blender has design that facilitates clean-out and material changes. Elements of construction include cartridge style metering gates, stationary loading platform, quick removal agitator, and sightglass style polycarbonate access doors. Equipped with color PLC-based touchscreen control system, blender also incorporates all-in-one removable metering unit and material hopper.

KNF Neuberger, Inc.    Trenton, NJ 08691-1810
Apr 23, 2012 Effective against pressures up to 90 psig, KNF SIMDOS® 10 Series transfers neutral or corrosive liquids with flow rate of 1-100 mL/min and dose volumes from 1-1,000 mL. Pumps can transfer viscous media at full flowrate up to 150 centistokes. Equipped with touch-control knob for setup and operation, pumps can run dry without damage, are self-priming up to 9 ft of water, and available with variety of wetted materials, including corrosion-resistant PTFE/FFPM.

STMicroelectronics    Lexington, MA 02421
Apr 23, 2012 Supplied in 4-bump flip-chip package with 1.14 mm² footprint, DIP1524 enables handsets to connect receivers for GPS/GLONASS satellites, Bluetooth, Wi-Fi, and LTE band 7 from same antenna. IC can deliver high signal strength to several RF receivers simultaneously, accelerating GPS startup time while providing position detection accuracy and location-based service reliability. Diplexer utilizes Integrated Passive Device technology, fabricated on glass substrate, that minimizes insertion losses.