Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Apr 25, 2011 Enabling low-power touch sense capabilities on MSP430 devices, 16-bit MSP430 MCU capacitive touch portfolio includes hardware and software solutions. Open source software library eliminates need to develop complex touch sensing algorithms and supports various capacitive touch sensor types. MSP430 Value Line G2xx2 and G2xx3 devices include capacitive touch IOs, which enable developers to interface directly with capacitive touch pads without external components.

TRIATEK    Norcross, GA 30093
Apr 22, 2011 Available in surface mounted or stainless steel flush mounted versions, Model FMS-1650-x-R connects directly to controller in room to be monitored and is updated instantly as room conditions change. Unit features full color LCD touchscreen that can be configured to display pressure, temperature, humidity, air changes, and room state simultaneously, or only those room parameters that require close monitoring. In addition to password protection, monitor provides both audible and visual alarms.

Binder-USA, LP    Camarillo, CA 93012
Apr 22, 2011 Suited for industrial environments, Series 713 M12 Connectors with 4 and 5 pins can be terminated with 16 AWG wires and max cable diameter of 10 mm. Both male and female versions are available in straight form and can conduct currents up to 8 A/contact. Series 820 7/8 in. Connectors with 5 pins can be terminated with 14 AWG wires and max cable diameter of 14 mm. Available in male and female versions with straight and angled forms, units withstand up to 12 A/contact.

Round, David, & Son, Inc.    Streetsboro, OH 44241
Apr 22, 2011 Designed for use within controlled environments found in pharmaceutical manufacturing, Ruger Industries all-stainless steel lift tables feature protected hydraulics and polished finish to facilitate wash-downs. External surfaces are entirely paint-free, meeting mandates of many drug makers for clean room equipment. While providing ergonomic benefits, tables come in capacities up to 2,000 lb and have respective raised and lowered heights of 42 and 18 in.

Coxreels    Tempe, AZ 85283-4323
Apr 22, 2011 Equipped with stainless steel external full-flow swivel and chemical-resistant Viton® seals, DEF Hose Reels come in SH Series heavy-duty single pedestal models or T Series supreme-duty dual pedestal versions that handle up to 75 ft of ¾ in. hose and up to 50 ft of 1 in. hose ID. Both are outfitted with Super Hub(TM) dual axle support systems to optimize stability and minimize vibration during operation. Standard spring retraction and EZ-Coil® controlled retraction systems are available.

Vision Engineering Inc.    New Milford, CT 06776
Apr 22, 2011 Swift Duo integrates ergonomic measuring microscope that enables difficult-to-view samples to be measured and inspected on same system, in same routine, by same operator. Able to measure routine and complex precision component parts, system is suited for shop-floor as well as manufacturing inspection applications and handles operations ranging from single features to multipoint video edge detection. Dual-axis measuring microscope has 150 x 100 mm (X/Y) measuring stage.

Nova Analytical Systems Inc.    Niagara Falls, NY 14301 2398
Apr 22, 2011 Available in wall-mount or portable formats, Nova 970 Series is intended for analysis of synthetic gas and gasification atmospheres or other industrial process gases for any combination of methane, carbon dioxide, carbon monoxide, hydrogen, and oxygen. Hydrogen analysis is fully compensated for effects of other measured interfering gases, and all gases are available with analysis range of 0-100%.

Sterling Instrument    New Hyde Park, NY 11042-5416
Apr 22, 2011 Hollow-shaft right-angle helical gear drives in S991HY-... Series feature aluminum alloy, hard-anodized case; built-in keyways; and heavy-duty sealed ball bearings. They also include 1144 steel, hollow bore shafts, ranging in size from 5/8-¾ in., as well as 4140 heat-treated steel gears. Operating in temperatures up to 200°F, gear drives offer 1:1, 2:1, or 3:2 ratios plus rated speeds up to 1,200 rpm. They are suited for printing, packaging, and textile machinery applications.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Apr 22, 2011 Offered in single, double and 3 pole versions, with or without LED blown fuse indication, UL approved DIN rail mount ASI fuse holders accept Class CC and midget fuse up to 30 A at 600 V. Lever in unit helps user to insert and remove fuse from circuit, whereas screw clamp box connections make ASI fuse holders easy to install. Holders are IEC standard compliant.

Northfield Precision Instrument Corp.    Island Park, NY 11558
Apr 22, 2011 Available in both SAE and metric sizes, Model DPH-500-5 chuck gives accuracy of 0.001-0.00001 in. Customizable unit features serrated jaws to enhance gripforce and axial locator with integral/air-detect function for positive loading of customer's part. Tertiary datum locator in axial locator allows parts to be twisted into position upon loading.

Tiffen Co. LLC, The    Hauppauge, NY 11788
Apr 22, 2011 Far Red Control Kit includes T1 and T½ IR filters, which absorb unwanted light while preserving camera's increased red response. Specifically, kit provides options needed to capture subtle hues of red while maintaining crisp blacks and assisting camera in capturing wide color gamut with minimal light loss: ½ and 2/3 stop. It is available in 4x5.650 and comes in 4 filter capacity belt loop style pouch.

Acrosser Technology    Cypress, CA 90630
Apr 20, 2011 Designed for telematics applications, Model AR-V6002FL accepts standard 12/24 V car battery input and can operate in environments from -20 to 50°C. Fanless unit supports CAN 2.0A/2.0B protocol to facilitate data transmission and offers optional GPS/ GSM/ GPRS/ EDGE/ UMTS/ HSDPA/ Wi-Fi/ Bluetooth communication modules for mobile communication and navigation. For power management, unit provides selectable delay timing and power input monitoring to shut down system at low power.

Acrosser Technology    Cypress, CA 90630
Apr 20, 2011 Based on ATOM N270 processor and ICH7M chip set, Model ACS-R5401FL provides 8 or 16 COM ports, which are 3-in-1 selectable for RS-232, RS-422, and RS-485 and offer up to 15 kV ESD protection. Unit also includes 3 console ports for remote and local management, 10 LAN ports, 6 USB ports, and VGA port. Since server is IP-based, it can be accessed via secure web browser or SSH client anytime. Unit features fanless design and operates up to 55°C.

Cognex Corp.    Natick, MA 01760 2059
Apr 20, 2011 Able to integrate with factory network/automation control systems, In-Sight® Explorer v4.5 cameras provide Flexible Flaw Detection edge and surface inspection tool. EasyBuilder® UI tools, Bead Finder and Bead Tracker, are also included for finding positional and width-based defects, gaps, as well as all necessary bead data needed for process control. Based on 1DMax(TM) and 2DMax(TM) ID algorithms, included ReadIDMax supports simultaneous reading of up to 128 barcodes and inspections.

Phoenix Contact    Harrisburg, PA 17111 0100
Apr 20, 2011 Available in 9 and 13 mm profiles, open-style ring screw (RSC) and ring bolt (RBO) lug connection terminals are offered in panel-mount and DIN rail-mount packages. RSC/RBO series supports feed-through connections, disconnects and current transformer shorting within switchgear and control system applications. Polyamide material meets flammability class V0 per UL 94, and they are UL recognized at 600 V with range of electrical current ratings from 30-45 A.

Diversified Technologies, Inc.    Bedford, MA 01730
Apr 20, 2011 Facilitating integration of wind and solar power generators by transmitting DC power, PowerMod(TM) Micro-Grid Power Distribution System includes DC power supply, DC cable, and down converter for providing AC or DC power at load end point. Eliminating limits of AC point-to-point installation, generator or load can be placed anywhere along cable, which is suitable for up to 1 MW power transfer. System provides constant 10 kVdc transmission at distances up to hundreds of kilometers.

Monotype Imaging Inc.    Woburn, MA 01801
Apr 20, 2011 FontExplorer® X Pro v3.0 offers transparent font slideshow feature that lets users place text over existing document in preview window and change desired fonts automatically. Also included, character toolbox displays information on languages supported by particular font in addition to specific characters available. Additional features are provided for comparing fonts relating to their ink and paper consumption during printouts as well as organizing fonts into groups.

Linear Technology Corp.    Milpitas, CA 95035
Apr 20, 2011 Capable of driving typical DC/DC converter topologies, LTC4000 converts externally compensated DC/DC power supply into full-featured battery charger. It operates across 3-60 V input and output voltage range; is compatible with various input voltage sources, battery stacks, and chemistries; and preferentially provides power to system load when input power is limited. IC also controls external PFETs, providing low-loss reverse current protection and instant-on operation.

Platinum Tools    Camarillo, CA 93012
Apr 20, 2011 Featuring EZ 1-button design, palm-sized 4Mapper Coax Tester is used for troubleshooting and identifying single or multiple coax cables connected to security cameras, TVs, monitors, routers, and splitters. Individually identified custom F remotes, featuring push-on design, let user track up to 4 connections simultaneously from main cable box. Tool displays Pass, Open, or Short and incorporates tone generator, automatic power off, and warning LEDs.

Unipower Corp.    Coral Springs, FL 33065
Apr 20, 2011 Mounted in 19 or 23 in. rack, 1U high DPBF1U Series provides distribution and overload protection for 8 circuits. Unit can support up to 8 single-bus load breakers or 4 dual-bus breakers with capacity of 150 A of load current per bus. Breaker ratings from 1-30 A can be accommodated, and any combination of 12, 24, or 48 V positive or negative ground is available as standard. Breaker trip alarm is indicated by red LED and 2 Form C relay contacts for each bus.