Enviroline Group (IECC)    Pompano Beach, FL 33069
Mar 18, 2005 Enviroline 380 ultra-high solids, thick-film epoxy coating exhibits chemical- and solvent-resistance in addition to abrasion- and impact-resistance. It does not require preheating prior to application and is suited for tank and pipe owners as well as contractors.

Eagle MHC    Clayton, DE 19938
Mar 18, 2005 Offering laminar flow and ESD control, AdjusTable® Work Surface Systems begin with stainless steel table top, accompanied by chrome or stainless steel posts. Optional undershelf is adjustable on 1 in. increments for level positioning without tools. Users can create custom configurations by adding additional wire or solid stainless steel undershelves and overshelves. Units are offered in 36, 48, and 60 in. lengths and in 24, 30, and 36 in. widths.

American Zettler, Inc.    Aliso Viejo, CA 92656 4115
Mar 18, 2005 With 20 A, 4,400 Va contact rating, Model AZ9321 offers 3,000 Vrms dielectric strength, 1 hp 125/250 Vac rating, and TV-8 tungsten rating. Coil voltages range from 3–48 V. Class F insulation system is standard. Unit is suited for lightning-sensitive applications such as HVAC and white goods controllers, irrigation controllers, or machine controls.

Kleentek    Cincinnati, OH 45242
Mar 18, 2005 Suited for extreme outdoor environments, Model N100 works electrostatically to purge oil of contaminants while eliminating need for mechanical filters. It draws oil from main reservoir and circulates it at very low velocity, removing submicron particles as well as large contaminants from hydraulic fluids and lubricating oils. Operating on 115 V from central control board, unit features filtering volume of 10,100 gal and flow rate of 5.5 gpm.

Astrodyne Corp.    Mansfield, MA 02048
Mar 17, 2005 NextGen Series enclosed AC/DC switching power supplies accept universal input from 85-265 Vac, and 90 models are available that provide Single/Dual/Triple/Quad outputs from 3.3-48 Vdc. Dual outputs offer shared common ground configuration or separate common returns for each output, depending on model. Featuring SMT construction and 105°C electrolytic capacitors, series offers power densities up to 4 W/in.² in 1U height-compliant sizes.

Greenheck    Schofield, WI 54476 0410
Mar 17, 2005 Model IG-HV features power-vented, 80% efficient, indirect gas-fired furnace with post-purge cycle. It provides airflow volumes to 7,000 cfm with heating capacities up to 400,000 btu/hr input. Unit is supplied with double width, double inlet, forward curved blowers tested to AMCA standards. It offers 3 heating and ventilation options plus 8 economizer and mixing box options, and can be supplied with 8:1 turndown furnace control.

Stratasys, Inc.    Minneapolis, MN 55344 2020
Mar 17, 2005 Eden260â„¢ photopolymer jetting system fully cures modeling material with UV light during modeling process. Offering resolution of 16 microns, models do not need curing after being built, nor do they require other steps beyond support removal. PolyJet modeling resin comes in sealed cartridges that are safe and clean, so users are not exposed to liquid resin. Operating on 120 Vac, 60Hz, Eden260 features 34 x 29 in. footprint with build envelope of 10 x 9.6 x 7.9 in.

Solar Compounds Corp.    Linden, NJ 07036
Mar 17, 2005 Solarite KM-2740 Series RTV (Room Temperature Vulcanizing) 2-component silicone grades include machine or manually mixed, standard and fast cure, as well as mastic, paste, or pourable. They have 1:1 mix ratio by volume or weight and are color-keyed for mix ratio verification. Electrical potting and casting silicones are UL-94V-0 approved, non-corrosive, and strippable. They produce void-free castings and are offered in 50–85A hardness range.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Mar 17, 2005 Lineas® Weigh In Motion Sensor Type 9195E measures wheel- and axle loads and also determines vehicle gross weight under rolling traffic conditions. Compact cables require 8 mm wide installation slots and channels for integration into road surface. Quartz piezoelectric sensor provides stability, is insensitive to temperature changes, and is protected to IP 68. Available in 2 sensing lengths, products accommodate all lane widths and choice of cable lengths.

Malvern Instruments Inc.    Westborough, MA 01581
Mar 17, 2005 Using CCD camera, automated Sysmex FPIA-3000 measures particles suspended in aqueous and non-aqueous liquid media. Standard configuration allows characterization of particles from 1.5-160 micron, while high and low magnification options cover 0.8-80 micron and 12-300 micron ranges respectively. Accepting sample volumes down to 0.5 ml, unit stores particle images for reference and analysis. Included software offers access to threshold control.

Keithley Instruments, Inc.    Cleveland, OH 44139 1891
Mar 17, 2005 RF Option is qualified for parametric process control by 200 and 300 mm production fabs. It offers continuous, automatic, real-time monitoring of measurement quality by detecting events that would invalidate RF calibration and triggering corrective action. Combined with Model S680 parametric test system, unit offers direct-dock capability for making measurements at 40 GHz. Automated probe-card changes eliminate variability caused by human intervention.

Toledo Integrated Systems    Holland, OH 43528
Mar 17, 2005 Model DPPlus basic integrates 4 die protection inputs, 8 programmable limit switches, brake monitor with brake test, motion detection, and job storage into an encoder-based package. Unit mounts in NEMA enclosure or in existing panel. Features include: batch, part, and stroke counters; alpha/numeric user programmed names; speed compensation; password protection; and press position display.

Mi-T-M Corporation    Peosta, IA 52068
Mar 17, 2005 Job Pro Electric Series features 1.5-8.0 hp TEFC electric motors, direct-drive triplex piston pumps with ceramic plungers, and forged brass manifold. Units include 1 in. powder-coated steel handles and 36 in. lance with rubber grip. Professional-grade insulated trigger gun features safety lock-off, and non-marking hose with quick connects, swivel, and bend restrictors. Additional features include pneumatic tires, dual rubber isolators, and 35 ft power cord.

Innov-X Systems, Inc.    Woburn, MA 01801
Mar 17, 2005 Providing on-the-spot elemental analysis from phosphorus to uranium, Alpha Series uses X-ray tube in compact, ergonomically designed unit with pocket PC. Point-and-shoot analyzer uses Smart Beam(TM) X-ray tube technology and Si PiN diode detector, which eliminate use of radioactive isotopes and related restrictions. Rear-facing display supplements color PDA and allows reading from any angle, and removable handle enables unit to fit into tight spaces.

SKF Motion Technologies    Lansdale, PA 19446
Mar 17, 2005 ConCentra products utilize concentric locking technology, which eliminates potential uneven load distribution, shaft damage, and fretting corrosion during equipment operation. Ball bearing units incorporate SKF deep groove ball bearings, pre-lubricated for life or with lubrication fittings, while roller bearing units use SKF Explorer spherical bearings pre-lubricated with lubrication fittings. Design facilitates installation and removal and minimizes vibration.

Anver Corp. - Anver.Com    Hudson, MA 01749
Mar 17, 2005 Controlled by action of hoist being raised and lowered, self-contained, self-powered Model 70S is suited for use anywhere around plant or job site. It requires no setup or power lines and features all-welded steel construction and bolt-on, 14 in. dia rubber vacuum cup. With 700 lb capacity, mechanical unit handles stainless steel, steel, aluminum, and stone from top without hooks, grabs, or magnets. Models are available with capacities to 15,000 lb.

FocalSpot, Inc.    San Diego, CA 92131
Mar 17, 2005 Series II RD-500 offers Dual-Point Auto Profiling, which provides closed-loop temperature control between top of component and ball/pad junction to minimize thermal delta. Three-point heating system includes localized hot gas top heater, localized hot gas bottom heater, and infrared area heater. Two-point cooling system consists of integrated cooling fan and top and/or bottom local nozzles that blow cool air. Side-inspection video system for monitoring process is optional.

Abanaki Corp., Oil Skimmer Div.    Chagrin Falls, OH 44023
Mar 17, 2005 Oil Grabber® Model 8² uses belt to attract oil and other hydrocarbon liquids from fluid's surface. Contaminants are then scraped off side of belt and discharged. Unit provides optimal operation in fluctuating depths up to 100 ft or more. Since endless belt is available in almost any length and tail pulley is free riding, skimmer can accommodate any height requirement. It also serves as pretreatment before filtration and can be used with coalescing systems.

TruSeal Technologies Inc.    Beachwood, OH 44122
Mar 17, 2005 Usable in single- or dual-seal constructions, DecoSeal offers all-in-one sealant and spacer system for decorative glass used in windows and doors. Warm edge spacer system wraps around perimeter of decorative panel and is then placed between 2 additional lites for efficient insulated glass unit. Benefits include low moisture vapor transmission rate, concentrated desiccant layer, and low profile that accommodates secondary sealing or structural reinforcement in large lites.

Kason Corporation    Millburn, NJ 07041
Mar 17, 2005 Stainless steel Centri-Sifter® removes bag scraps and other oversize contaminants from manually dumped bulk materials while protecting operator and plant environment against dust contamination. Configured for installation on mezzanine, system gravity-discharges into process equipment. Ambient air and dust is drawn onto exterior of 2 cartridge filters that derive vacuum from top-mounted exhaust fan. Dust accumulated on filter's exterior is dislodged and falls into screener.