Weidmuller, Inc.    Richmond, VA 23236
Mar 28, 2005 To address global issue of ATEX certification, Ex-range of enclosures and terminals are designed and certified for use in Zone 0, 1, and 2 environments. Units support whatever internal wire termination method is required, including screw connection, tension-clamp, and insulation displacement. Enclosures can be milled, drilled, painted, and assembled to customer's exact specifications.

Zeiss, Carl, Industrial Measuring Technology (IMT) Corp.    Maple Grove, MN 55369
Mar 28, 2005 Confocal Laser Scanning Microscope, Model LSM 5 PASCAL includes functions for quantitative surface analysis and characterization such as roughness and volumetric measurement as well as bearing ratio analysis. Units are available with Axio Imager MAT upright stand or Axiovert 200 MAT inverted stand. Both can employ piezotechnology for precise measurements of nanometer-scale height steps. StitchArt software allows large profiles and topographies to be recorded.

Aigner Index, Inc.    New Windsor, NY 12553
Mar 28, 2005 Charged Card 2-sided, color-coded magnet features write-on/wet erase finish on both sides for labeling. It helps workers spot which batteries need recharging in warehouses and storage facilities that use battery-powered lifts and vehicles. Charged Card can be cut with scissors to desired size.

Even Cut Abrasive Co.    Cleveland, OH 44103
Mar 28, 2005 Cartridge rolls are manufactured by wrapping abrasive cloth materials around appropriately sized mandrel. Available with aluminum oxide grain, silicon carbide grain, or zirconia/alumina grain, units are suited for polishing, blending, deburring, and flash removal operations. Fresh abrasive grain is exposed as outer layer of cartridge roll wears away. Cartridge rolls are available in 1/8–1½ in. diameter and ¾â€“2 in. length with grits from 36–320.

Optronic Laboratories, Inc.    Orlando, FL 32811 6590
Mar 28, 2005 Model OL 730C features internal amplifier and sensitivity of 1 x 10^-14 A. Virtually controlled via user's PC, Model OL 730CV boasts response time as fast as 0.1 sec with full-scale range of 2 x 10^-10 to 2 x 10^-3 A. Utilizing digital signal processing, Model OL 730D is capable of measurements over all or part of UV/VIS/IR spectrum and has photon counter for extremely low light level measurements.

PRIMA LASER TOOLS    Chicopee, MA 01020
Mar 28, 2005 With split-cabin, sliding pallet design, RAPIDO 3D laser cutting system offers continuous part cutting without any idle time during unloading/reloading process. Machine structure, laser, CNC, and electro mechanics are integrated into cantilevered, compact architecture. Operating with Cenit Software's v5/LaserCUT technology, machine also employs automatic Focal Position Control, Safe Impact Protection System, and Laser Piercing Monitor.

J. W. Winco, Inc.    New Berlin, WI 53151
Mar 28, 2005 Available in various sizes, Metric Size Oil Seals feature steel cores with outer diameters in nitrile-butadiene-rubber or fluorocarbon-rubber (Viton). Type A version has sealing lip with garter spring, while type AS version has additional dust lip. Additional types are available.

Kontron    Poway, CA 92064
Mar 28, 2005 Powered by 1.4 GHz Intel® 738 Pentium M® processor, Embedded Computing Module (ECM) provides PC engine with up to 1 GB DDR RAM and 2 MB cache for application-specific mobile systems. Unit integrates Intel Pro Wireless 802.11b/g wireless networking capability, removable 40-60 GB hard drive, and one docking connector. Mil-Std 810F-certified packaging, measuring 6.5 x 4 x 1.8 in., is suited for military and harsh industrial environments.

Aisle-Master    Memphis, TN 38122-0666
Mar 28, 2005 Suited for indoor and outdoor use, 40SE articulated forklift can maneuver in aisle widths down to 6½ ft in palletized storage areas. Unit features solid pneumatic tires, 4,000 lb capacity, and lift height options up to 30 ft. Forklift is suited for food and pharmaceutical sectors as well as other locations previously unsuitable for IC equipment, including furniture factories, tile suppliers, and third party logistics companies.

Schleuniger, Inc.    Manchester, NH 03103
Mar 28, 2005 Suited for wire harness manufacturing facilities, CrimpCenter 60 and CrimpCenter 70 accommodate up to 4 processing stations and can process applications with weather seals, doubling, twisting, and tinning. Production data is entered into Windows-based software via touch-screen interface and can be recalled for future job changes. Machines can be networked for production allocation and tracking.

Bivar, Inc.    Irvine, CA 92618 2593
Mar 28, 2005 Offered in 571+ different styles and sizes, line of snap-in and vertical, standard-mount card guides accommodate 1/16, 3/32, or 1/8 in. PCBs and are manufactured in compliance with WEEE and RoHS Pb-free materials and processes. Offered in 31 styles, VERT-O-GIDEâ„¢ offers 2-channel vertical guide for 1/16 in. PCBs. Line also includes CARD-O-PULLâ„¢ PCB ejectors, inserter/extractors, PCB handles and CUT-OUT-COVERâ„¢ connector cutout covers.

Baumer Ltd.    Southington, CT 06489 1534
Mar 28, 2005 Available in 42 and 58 mm housings, MagRes single-turn encoders offer 12-bit resolution, while multi-turn designs feature up to 30-bit resolution. All are zero-point programmable and operate optimally at -20 to 85°C. Both SSI and parallel outputs are available. MagRes encoders support most major bus system outputs including CANopen, DeviceNet, and Profibus-DP. Non-contact units are available in 15.5 mm deep housing with 12-pin connector.

Sensor System Solutions Inc.    Irvine, CA 92618
Mar 28, 2005 Model 3001 ISAC-1 load cell signal conditioner combines functions of load cell calibrator, weight indicator, signal conditioner, and wireless transceiver in one package. It can be retrofitted into any existing scale installation and any other sensors with mV outputs. Embedded program provides set point driven digital I/O for process control, load cell diagnostics, and wireless communication to Bluetooth enabled PDA’s and laptop computers.

GE Energy    Atlanta, GA 30339
Mar 28, 2005 Stress corrosion cracking screening process, SCCScreenâ„¢, offers oil and gas pipeline operators means of complying with US Office of Pipeline Safety advisory to evaluate SCC-susceptible lines. Adopting select aspects of in-line inspection and direct assessment, 3-phase process uses Ultrascan crack detection tool for liquid pipelines and combination Magnascan and Transcan runs analyzed with proprietary criteria for gas pipelines.

Diamond Systems Corporation    Mountain View, CA 94043
Mar 28, 2005 Without requiring user intervention or software, DMM-32X-AT analog I/O PC/104 module has all intelligence and control necessary for calibration process on board. This enables board to calibrate itself in response to user-programmable delta in ambient temperature. Built-in RS-232/485 serial port and on-board microcontroller are provided for remote communications, enabling device to be used standalone, without CPU.

Embedded Solution Partners    San Mateo, CA 94402
Mar 28, 2005 With support for embedded operating systems, SolutionSDC allows distributed applications to share information across networks without subjecting it to breaches in security. It is based on integration of Real-Time Innovations' NDDS data-critical system platform and TeamF1's V-IPSecure, implementation of IPSec, and IKE for IPv4/v6. Product facilitates seamless peer-to-peer communication safe from eavesdropping, tampering, and unauthorized access.

APEM Components    Haverhill, MA 01835
Mar 28, 2005 Professional-grade 12000X778 Series features full rear sealing, locking lever actuator, and double shell case for mechanical strength and electrical insulation. With IP67-sealed front panels, 2-, 3- or 4-pole double throw models are offered in momentary and maintained, 2- and 3-position configurations. Contact mechanism suits applications of 10 mA @ 50 mV and 5 Vdc min with electrical life up to 40,000 cycles. All switches measure .594 in. deep.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Mar 28, 2005 THE WRECKER line of Sawzall® reciprocating saw blades, suited for rescue and demolition applications, cuts through wood, metal, plastic, and composite material without requiring user to change blade types. With 8 teeth per in., series ensures that 3 teeth are engaged in cutting for optimal performance. Blades, manufactured from Bi-Metal Matrix II material with 8% cobalt, measure 1 in. high and .062 in. thick and are offered in 6, 9, and 12 in. lengths.

IIMAK    Amherst, NY 14228
Mar 28, 2005 Series TF-160 tear-resistant ultra-thin film is opaque white and produces black image that withstands moderate exposure to moisture, light, and heat. It suits direct thermal applications including healthcare identification, pharmaceutical labeling, frozen food and meat packing, fruit labeling, durable receipts, event passes, sporting licenses, airline bag tags, and temporary phone cards.

Esco Tool    Medfield, MA 02052
Mar 25, 2005 Air Powered Saw, Model APS-438 is available with PanelHOG® Assembly, which features wedge-style clamps and track that comes in 5–15 ft sections for making straight cuts without tack welding tabs and hot spots. Providing cut-line indicator gauge to facilitate setup and alignment, clamping bracket can be adjusted for all types of boiler tube panel sections. Operating on 90 psi air with 3 hp pneumatic motor, saw cuts alloyed materials up to 4 in. thick.