SKF Motion Technologies    Lansdale, PA 19446
Apr 06, 2005 Suited for packaging industry, IWIS accumulator chains promote even load distribution where each pin bears load. Product incorporates acceleration rails; light-running transport rollers in hardened steel, plastic, or anti-static; and offset roller arrangements. Featuring wax lubrication at bearing points, chains can be specified in variety of shapes and configurations and are compatible with existing guides, deflector units, and chain wheels.

Danaher Motion    Wood Dale, IL 60191-1073
Apr 06, 2005 Superior Electric Series XCE satisfies ATEX standards for use in potentially explosive atmospheres as defined by CE directive 94/9/EC. Motors have flameproof enclosure with max surface temperature of 100°C. Requiring only resistor-capacitor network to operate from single-phase ac utility power, units turn at speeds of 72 rpm with 60 Hz or 60 rpm with 50 Hz. They are available with torques up to 1,500 oz-in., for operation on 120 or 240 Vac, in standard NEMA size 42 or 66 housings.

Linear Technology Corp.    Milpitas, CA 95035
Apr 06, 2005 Using constant frequency, current mode architecture, synchronous buck regulator Model LTC3418 provides up to 8 A of continuous output current at voltages as low as 0.8 V from 5 x 7 mm QFN package. With efficiency up to 95%, unit operates from input voltage of 2.25-5.5 V, making it suited for single-cell Li-Ion or NiMH applications, as well as fixed rail systems. Switching frequency of 4 MHz allows utilization of tiny capacitors and inductors with less than 1.5 mm profile.

Phihong USA    Fremont, CA 94539
Apr 06, 2005 Offering total output power of 15.4 W, switching power supply, Model PSA16U features ac input voltage of 90–264 Vac with voltage range from 100–240 Vac and ac input frequency from 47–63 Hz. Maximum output load current is 0.35 A. Three LEDs indicating power, connection, and faults facilitate installation and set-up. Power-over-Ethernet allows power and data to be carried over Ethernet cable. Applications include wireless access points, security cameras, and IP telephones.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Apr 06, 2005 Supplied in 2.8 x 7.0 x 1.6 mm package, HSDL-3007 IrDA/remote control transceiver enables mobile phones and PDAs to function as universal IR remote controls for home appliances. Logic I/O interface operates at 1.8 V, and unit is compatible with remote control application software. Active over distances to ~23 ft, programmable unit has min transmission angle of 30°, self-teach/learn mode, and ability to store up to 8 profiles with up to 10 devices each.

Presto Lifts, Inc.    Attleboro, MA 02703
Apr 06, 2005 Available in capacities up to 4,000 lb, hydraulic P4 is accessible from all 4 sides and designed for use in manual loading and unloading of pallets. Platform lowers to floor height so pallets can be placed and removed using hand pallet truck. In loading and unloading operations, product enables successive approach to pallet handling. It has 28 in. vertical travel and features photoelectric toe guard that stops downward travel if interrupted.

Lumberg, Inc.    Midlothian, VA 23113
Apr 06, 2005 Suited for use in I/O cabinets and J-Boxes, e2c 20 slice-style DIN rail mountable terminal block I/O modules feature spring clamp terminals and color coding to facilitate identification. Modules have 12 mm wide profile on all I/O modules, including 16-channel digital I/O. Units also include removable terminal blocks, module release latch, and support for DeviceNet and Profibus.

ANCA Inc.    Farmington Hills, MI 48335
Apr 06, 2005 Keyhole Punch package allows creation of customized contours as well as punch geometries from library of shapes. Able to create punches with concave and convex shapes, solution will specify wheel shape required to grind punch once shape is designed. Resultant wheel shape can then be loaded into ANCA Wheel Editor. Software facilitates setup, aids in process dressing, and minimizes cycle time.

Snap-on Industrial    Kenosha, WI 53141 1410
Apr 06, 2005 ScanCheckâ„¢ OBD-II Scan Tool (MTSC500) enables technicians to retrieve and clear trouble codes on all 1996 and newer ODB-II compliant systems on domestic, European, and Asian vehicles. It supports CAN systems, displays freeze frame data and oxygen sensor readings, and includes manufacturer-specific enhanced P code information for GM, Ford and Chrysler vehicles. Internal software is updated via CD with optional PC computer connection kit.

Pomona Electronic    Everett, WA 98204
Apr 06, 2005 Designed to connect component test leads, terminals, and integrated circuit leads, Grabber® and Minigrabber® clips connect precisely and securely to facilitate testing. They are offered in variety of sizes, tips, and configurations. Available types include Minigrabbers No. 4723 and 4555, rotating Micrograbbers No. 5790, 5929, and 5930; and Micro SMD Grabbers No. 6490 and 6311 for connections in tight spaces, such as electronics.

Duraline Div., J.B. Nottingham & Co., Inc.    Islandia, NY 11749
Apr 06, 2005 US Navy 3- and 4-wire Systems are watertight with waterproof-shielded connections, neoprene rubber distribution blocks, and mating plugs molded to 600 V cables. Mini-System consists of line-voltage resistance heating system suited for applications like preheating plates, spheres, and vessels. Smart Heaters are FM-approved electrical resistance heaters with independent thermostatic control that automatically monitors and controls temperature at each weldment.

TURCK, Inc.    Plymouth, MN 55441
Apr 06, 2005 Providing power up to 20 A at 300 V, M23 powerfast cordsets and receptacles are suited for motors and material handling applications. Configurations with 6 and 7 pins are offered with 14 AWG at 20 A and 300 V, while 9-pin is available with 3/14 AWG at 20 A and 6/18 AWG at 8 A and 150 V. Each features PVC cable and connectors that provide waterproof protection to IP67. Front or rear mount mating receptacles come in fully encapsulated brass housings.

Mitee-Bite Products Inc.    Center Ossipee, NH 03814
Apr 06, 2005 Consisting of wax-based compound embedded in paper, heat-activated Mitee-Grip maintains parallelism on precision parts. It bonds to steel, aluminum, glass, ceramics, wood, and most plastics. To bond parts to sub-plate with holding force of 40 psi, Mitee-Grip is placed between sub-plate and workpiece and is heated to 180–200°F. After machining with coolant, reheating will release workpiece.

Neopost    Hayward, CA 94544
Apr 06, 2005 NeoTrakâ„¢ multi-carrier compliant, shipping automation system allows users to process small parcel shipments with multiple commercial carriers from single user screen on desktop computer. Operators can compare similar services among various carriers for most cost-effective option. Once shipments are processed, system stores all transaction detail into permanent archived database and can provide access to delivery status of each shipment.

Diversified Technology Inc.    Ridgeland, MS 39157
Apr 06, 2005 Compliant with PICMG 3.0/3.1 specifications, Model ATS1460 Blade provides separate control plane switching, data plane switching, and storage plane switching for ATCA shelves. It supports gigabit Ethernet on base control network, and on fabric network, it supports both gigabit Ethernet for data and 2-gigabit Fibre Channel for storage. All 3 networks are non-blocking and feature wire-speed learning. Unit also supports CLI, telnet/SSH, SNMP, RADIUS, and web interface.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.    Buchanan, MI 49107-1801
Apr 06, 2005 Featuring closed 10 mm slots, aluminum wall and ceiling profiles require no additional machining. Spring-loaded clamping profiles are used for attachment of surface elements and other accessories. T-connector lets user create closed frames that can be reused or reconfigured at any time. With bolt-together construction, rooms can be designed to accommodate customer-specific requirements regarding fire protection class, noise protection, and cleaning options.

Quatech, Inc.    Akron, OH 44311
Apr 06, 2005 Models QSE-400D and ESE-400D are equipped with 4 and 8 serial ports, respectively, that can be software-configured for RS-232, 422, or 485 operation on each available port. Industrial sensors, CNC machines, automated meter readers, biometric equipment, and other serial devices can operate over network, as servers provide minimum data transfer time possible. Choice of operating modes allows deployment on almost any Ethernet network.

Gems Sensors Inc.    Plainville, CT 06062
Apr 06, 2005 Combining internal piston and diaphragm media interface, Series PS41 features repeatability of ±2% of full set point range from 3–100 psi, while delivering 350 psi proof pressure. Switches offer brass or stainless body material, choice of 6 pressure port sizes, plus 3 SPST and SPDT switch circuits. Diaphragm may be specified in Viton®, neoprene, or EPDM. Largest model is series measures 1.25 in. dia, making series suited for space-sensitive applications.

Ohmic Instruments Co., Instrumentation Div.    Easton, MD 21601-3902
Apr 06, 2005 Using thermal conductivity sensors, Model AHT-200 measures moisture content at elevated temperatures up to +200°C with outputs of 0–5 V, 0–10 V, or 4–20 mA. It offers range of 0–130 g/m³, with accuracy of ±3 g/m³, which corresponds to ±2.3% RH at 35 g/m³ at 60°C. Suited for harsh environments, washable transmitter recovers from deposits and condensation.

Toray Plastics (America)    North Kingstown, RI 02852
Apr 06, 2005 FDA-compliant PET Lumirror® PS10 enables converters to eliminate corona treatment or chemical priming processes and produce label product that prevents migration of silicone to other surfaces. Able to be laminated, printed, or vacuum metallized, product is made with co-extruded sheet that consisting of amorphous material over crystalline polyester. Applications include labels, adhesive backing for signage, and release liners for medical tapes and bandages.