K-Tek    Prairieville, LA 70769
May 06, 2005 MagWave incorporates dual-chamber design that includes magnetic level gauge for level indication and guided wave radar transmitter. Unit offers accurate level measurements with pressures up to 3000 psi or temperatures to 800°F. Custom configuration is available with second chamber fitted for guided wave radar, magnetostrictive, or capacitance transmitters. Unit provides independent, redundant measurements in oil, gas, petrochemical, and power applications.

Linear Technology Corp.    Milpitas, CA 95035
May 06, 2005 Model LT5527 high linearity, active downconverting RF mixer simplifies design of 3G cellular basestations. At 1.9 GHz, unit offers IIP3 linearity of 23.5 dBm, conversion gain of 2.3 dB, and noise figure of 12.5 dB. Local oscillator and RF inputs operate single-ended and have built-in 50 ohm impedance, requiring few external matching components. Low-noise LO buffer allows operation at -3 dBm LO drive level, reducing need for external filtering.

4D Technology Corporation    Tucson, AZ 85706
May 06, 2005 FizCam™ 1500 dynamic Fizeau interferometer uses single camera and high-speed optical phase sensor, making it insensitive to vibration and air turbulence. It measures full wavefront in 30 millionths of second and features 16x optical/digital zoom, wavelengths from 638 nm to 1.06 mm, and aperture options from 100–600 mm. System includes interferometer mainframe, Pentium IV computer system, and 4Sight™ advance wavefront analysis software.

Endicott Research Group, Inc.    Endicott, NY 13761
May 06, 2005 Series DmF6 DC-AC Inverters measure 9 mm high and power CCFL-backlit LCDs in 19-24 in. diagonal size range. Inverters power 6 CCF lamps with combined power up to 60 W, providing starting voltage up to 2,400 V with flicker-free brightness control from 0-100%. Inverter also features transformers and connectors for direct connection to display on board measuring 9.52 x 2.83 in. Six mounting holes facilitate installation.

Pfeiffer Vacuum Inc.    Nashua, NH 03063
May 06, 2005 SmartTest(TM) delivers results at max inlet pressure of 25 mbar, and detects helium leaks at rate of 5 x 10^-12 mbar l/sec. Unit features integrated test leak for self-calibration, vacuum and sniffer operating modes, and optional industrial proof hand held remote control. Backing pump is user-selectable to match application needs in semiconductor, automotive component testing, refrigeration, and air conditioning industries.

Balluff, Inc.    Florence, KY 41042-0937
May 06, 2005 Series BOS 2K sensor offers full functionality in package measuring 20 x 7.5 x 10 mm. It offers scan range of up to 1.2 m. Four different sensing modes are offered: diffuse, for part identification; diffuse with background suppression, for part configuration and placement; retroreflective, for parts verification and counting; and thru-beam versions for part sizing and position information. Each sensor contains pinpoint LED emission for exact aiming and positioning.

Spirax Sarco, Inc.    Blythewood, SC 29016
May 06, 2005 Pressure-powered Pivotrol® PTF-HP is designed for steam system condensate recovery in rapid-cycling process environments under elevated pressure and temperature conditions. PowerPivot® technology replaces pins and linkages with pivots, minimizing friction and wear. Damper uses hydraulic inertia of collected condensate to reduce mechanical shock as valve actuators shift. Self-contained, self-regulated unit is offered with 300-lb flanges.

Kurt Mfg. Co., Electronics Div.    Minneapolis, MN 55449
May 06, 2005 Modular USB building blocks provide plug and play solutions that allow mixing and matching of capabilities for specific applications without PLC logic and wiring. Offered as Digital, LVDT or Analog, DC I/O, and USB Modules, products allow user to collect data from any gage hardware, depending on model. USB modules allow process control, including automation control and CNC communication, and can be used with KurtSPC software.

Unipower Corp.    Coral Springs, FL 33065
May 06, 2005 RSG Series rectifiers and SG/TSG Series front ends are offered in hot-swap or chassis-mount cases, which measure 1U high x 2U wide x 11 in. deep. Hot-swap versions are offered in 1U-high rack/shelf, which holds up to 4 units that can be operated in 3+1 redundant mode. Rack also permits dual A/B operation for ac inputs and dc outputs. Incorporating output O-ring diodes, module offer output voltages from 48 or 54.4 Vdc @ 550 W to 12 or 13.6 Vdc @ 450 W.

Gage Applied Technologies, Inc    Lachine, QC H8T 3H7  Canada
May 06, 2005 Featuring on-board memory to 4 GB (2 Gigasamples), 12-bit CompuScope 12400 is available with Finite Impulse Response Filtering and Signal Averaging FPGA technologies. Multiple cards can be configured as Master/Slave to create a high channel count system without compromising acquisition memory depth or sampling rate. Product is compatible with GageScope® Oscilloscope software for acquiring and analyzing signals without writing programming code.

AVX Corp.    Myrtle Beach, SC 29578
May 06, 2005 Offered in case sizes from 0402 to 2220, MG and V2F series transient voltage suppressor (TVS) devices are based on multilayer varistor (MLV) concept and zinc oxide material systems. Multiple element array configurations and transfeed LC–T MLV configuration withstand neutron fluence fields up to 5 x 10¹² N/CM² with no change in breakdown voltage. Products are offered in MLV arrays and MLV feedthru filters.

Staco Energy Products Co.    Dayton, OH 45403 1314
May 06, 2005 Employing double-conversion technology, UniStar IIILA Series produces clean, steady sinewave that protects downstream equipment. Product, offered in tower and rack-mount models, is protected against short circuit and over-temperature conditions. Available with 1, 2, and 3 kVA capacities, series offers microprocessor control, remote monitoring and diagnostic capabilities, and Smart Battery Management System.

BEA Inc.    Pittsburgh, PA 15215
May 06, 2005 Bodyguard III overhead presence sensor uses diffused active IR sensing to protect entire swing path of automatic swinging doors, from guide rails through to threshold. Rain and snow mode reduces nuisance openings due to misread environmental cues, while learn time feature ensures that objects abandoned inside detection area will not inhibit sensor function. Microprocessor controlled unit can be programmed using BEA Universal remote.

Conbraco Industries, Inc.    Matthews, NC 28106 0247
May 06, 2005 Apollo® OSHA-compliant lockout device protects workers from accidents and injuries during servicing and maintenance of actuator-controlled valves. Available in 6 sizes, it features top and bottom ISO 5211-style tapping to facilitate mounting between actuator and valve. Product, constructed with cast 316 stainless steel and 300 Series stainless steel, locks automated valve into fully open or closed position and accommodates up to 6 locks.

Degree Controls Inc.    Milford, NH 03055
May 06, 2005 Used together or independently, COLDFRONT products automate thermal management of data centers, central offices, and communication centers. Products include COLDFRONT NODE temperature data acquisition system and COLDFRONT TILE fan-assisted, perforated floor tile. Thermal management software, COLDFRONT THERMAL SERVER, communicates with NODEs to read temperature measured and commands tile fans to operate at different speeds as required.

Weber Sensors Inc.    Woodstock, GA 30189
May 06, 2005 Foto-captor lets users program set-points to specific applications from 300–800°C. It accepts input voltages of 24 Vdc or 110 Vac and provides transistor or opto-isolated output options. Additional options include water cooling, air purge, and application-specific viewing lenses.

Molex Inc.    Lisle, IL 60532-1682
May 06, 2005 Optical Industrial LC Duplex connector system combines fiber optic connection performance with industrial-environment endurance. To ensure environmentally sealed optical connection, assemblies feature push-pull insertion and bayonet-style mechanical latch. Bulkhead adapter has sealed panel, feed-through design. Multimode fiber style is suited for long-distance or remote connections to 300 m, while single-mode fiber style covers distances over 1 km.

Micropump, Inc., A Unit Of IDEX Corp.    Vancouver, WA 98684
May 06, 2005 Series PF employs valveless design that minimizes clogging and allows for consistent metering and dosing of even soft-solid containing fluids at flow rates to .26 gpm and pressures to 100 psi. Constructed with reciprocating and rotating piston, unit offers various mounting options and chemical compatibility. It comes with stepper motor, that, when used with electronic controller, offers programmable operation with reproducible results.

Mitee-Bite Products Inc.    Center Ossipee, NH 03814
May 06, 2005 Manually operated Speed Block lets operator tighten clamp when drive screw is not accessible; cam-actuated piston moves drive plate up and down, loosening and tightening clamp screw. Used on any clamp that uses straight draw, product is offered in single station suited for clamping pieces over 2 in. in diameter. Mounting holes are pre-machined on 4.125 bolt circle for 3- or 4-hole installation. Unit also mounts on rotary tables.

Pulse Instruments, Inc.    Torrance, CA 90502 1206
May 06, 2005 Featuring 10 kohm input impedance, PRL 444 self-contained buffer pod drives 4 TTL/CMOS signals into 50 ohm loads and can receive signals from devices with low drive current. Unit comes in aluminum housing with ac adapter and BNC or SMA signal connectors. With 50 ohm load terminations, all outputs can drive 100 ft of 50 ohm cables at clock rates exceeding 60 MHz. Applications include digital communications, test and measurement, and system integration.