GE Inspection Technologies, GmbH    Huerth 50354  Germany
Apr 22, 2005 Rhythm software suite offers image review tools and data management capabilities for all X-ray inspection modalities. Data sharing capabilities facilitate identification of quality problems, help reduce production defects, and improve in-service asset management. Comprised of Rhythm Acquire, Review, and Archive, software saves and transfers all data in DICONDE format. Archive index tool facilitates location and identification of specific inspected component archives.

Hart Scientific, Inc.    American Fork, UT 84003 9775
Apr 22, 2005 Able to be entirely enclosed in dry or wet environments with temperatures up to 156°C, Model 5623A Freezer Probe features sealed construction that prevents ingress of moisture when exposed to extremely low temperatures. NIST-traceable unit, available in 0.25 in. dia x 6 in. long Inconelâ„¢ sheath, is designed as calibration standard and has accuracy of ±0.05°C over full temperature range.

Linear Technology Corp.    Milpitas, CA 95035
Apr 22, 2005 Offering reverse-current inhibit feature and adaptive nonoverlap control, LT3800 current mode, synchronous, step-down controller operates without requiring auxiliary DC/DC regulator for startup. Unit operates from 4-60 V supplies and regulates output voltages from 1.23-36 V at load currents up to 10 A. Operating at 200 kHz fixed frequency with 94% efficiency, it includes Burst Mode® operation for no-load quiescent current under 100 µA.

Upchurch Scientific, Inc.    Oak Harbor, WA 98277
Apr 22, 2005 Featuring ¼â€“28 flat-bottom ports, manifolds are available in models for 1/16 and 1/8 in. OD tubing. Used with included Super Flangelessâ„¢ fittings, 1/16 in. OD version will withstand up to 5,000 psi and 1/8 in. OD version will withstand up to 1,000 psi. Units are suited for splitting flow streams in 8 directions, such as infusion onto 96-well plate.

PHD, Inc.    Fort Wayne, IN 46899
Apr 22, 2005 Pneumatically powered actuator, Series PLC locates, clamps, and supports parts in weld areas. Fully enclosed design provides protection against weld slag and other contaminants, while built-in locking mechanism locks pin in any position to secure parts if air pressure is lost or removed. Available in 2 sizes with 5 pin size choices and 2 pin styles, Series PLC provides 12.5 mm max clamping stroke, which allows shimmable part support.

ALGOR, Inc.    Pittsburgh, PA 15238
Apr 22, 2005 ALGOR v17 facilitates design of steel structures made up of beams and trusses to ensure code compliance and to satisfy third-party design approval. Software features tree support for surface and body loads, support for hyperfoam and anisotropic materials, and rotating reference frames for modeling circulating flows. Graphs and result contours can be displayed in same window, while other display options include animation files and HTML reports.

Tech Packaging Group LLC    Joplin, MO 64804
Apr 22, 2005 Series 154 levels and flattens product in paper or plastic bags prior to palletizing or stacking. Bags are conditioned between 2 opposing belt conveyors with adjustable compression to allow for different size bags and/or products. Integrated power roller drives eliminate obstructions and maintenance associated with gear reduction drives. Offered in carbon or stainless steel, system comes in range of widths and lengths to suit application.

Aremco Products, Inc.    Valley Cottage, NY 10989
Apr 22, 2005 Single-part, high-temperature Pyro-Puttyâ„¢ 1500 is used as sealant and gasketing compound in primary metal, foundry, and smelting industries for service conditions to 2,300°F. Non-toxic product will not shrink or crack on hot molds, and will not affect metallurgy of molten metals. It can be applied to tools before assembly, spot applied to bad joints after assembly, or used to seal vertical mold cracks. Product density is 11 lb/gal.

Aviel Electronics    Las Vegas, NV 89118
Apr 22, 2005 Providing functional equivalents for obsolete RF coaxial connectors and adapters, replacements come in brass, stainless steel, and aluminum body materials with brass, beryllium copper, of phosphor bronze contacts. Styles include SMA, SMB, SMC, MCX, and other miniature series interfaces as well as larger interfaces such as BNC, TNC, N, C, SC, HN, LT, and LC. Bodies are produced in straight, right-angle, bulkhead, flange mount, blind-mate, and tri-axial configurations.

CR Magnetics    St. Louis, MO 63122
Apr 22, 2005 Designed to display current, voltage, power, and frequency measurements, CRV series Data View meters connect to any system to provide direct control through relay and analog output options. Products, which include Crystal, Triview, Grafix, and Keystone Series, are fully programmable with alarms/limits and feature accuracy of ±0.05% of reading + 2 counts. Each meter is available with serial communications, front panel buttons, and status indicators.

Strandberg Engineering Laboratories, Inc.    Greensboro, NC 27405
Apr 22, 2005 Designed for use with webs as narrow as one strand, Spectrum 4 checks and stores speed as well as stretch and shrinkage from roll to roll. Unit can download up to 100 data points to PC, revealing speed to 0.1 yd/min and stretch or shrinkage to 0.1%. Usable for spot checks at critical places or regular QC audits, meter is available with multiple optional contact and non-contact sensors, which it recognizes and calibrates for when inserted.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Apr 22, 2005 Featuring 1¼ in. cutting stroke, Super Sawzall® products feature orbital cutting action and 0–3,000 SPM variable-speed trigger. Model 6523-21 has 360° rotating handle that locks at 45° increments and can continuously rotate in either direction. Model 6536-21 incorporates heavy-duty Quik-Lokâ„¢ blade clamps with gripping ribs that facilitate blade changes. Counter-balanced for smooth operation, both saws have keyless adjustable shoe and gear-protecting clutch.

Hougen Mfg. Inc.    Flint, MI 48501 2005
Apr 22, 2005 Suited for repetitive hole drilling, HMD904 is offered with package that ensures adequate levels of coolant are continuously delivered to tool's cutting edge. Drill also incorporates LED indicator with circuitry that monitors critical magnet lift/shift sensor and switch, changing from green to red if unsafe condition exists. Powered by 7.2 A, 450 rpm motor, tool uses 12,000-Series Rotabroach® Annular Cutters for burr-free holes up to 1½ in. dia and 2 in. deep.

Igus, Inc.    East Providence, RI 02914 0349
Apr 22, 2005 Constructed from polyurethane for long service life, Chainflex® Air pneumatic hoses are designed for use in Energy Chain System®. They offer 10 million cycles at bend radius 10 times OD, and are resistant to abrasion, oil and coolant. Ten hose sizes are available from stock.

Osram Sylvania, Inc.    Danvers, MA 01923
Apr 22, 2005 Using amalgam technology, PENTRON® CONSTANT T5 HO lamp provides 90% of its rated light output in temperatures from 40 to 165°F. Product, able to reach full brightness in 1 min, is suited for warehouse and industrial lighting and indirect office applications as well as outdoor signage, parking structures, and lighting in gas station canopies.

Lithonia Lighting    Conyers, GA 30012
Apr 22, 2005 RT5â„¢ Volumetric Recessed Lighting uniformly illuminates entire volume of space, eliminating harsh shadows, dark walls, and cave effect. Available in 2 x 4, 2 x 2, and 1 x 4 ft configurations, it uses 2-piece refractor system with diffusing film and extruded prisms that produce soft illumination. While reducing eye strain and fatigue, product also minimizes glare and meets energy regulations such as California's Title 24, ASHRAE 90.1, and IECC.

Osram Sylvania, Inc.    Danvers, MA 01923
Apr 22, 2005 Installed on any line voltage from 120–277 V, QUICKTRONIC® POWERSENSEâ„¢ works on 0–10 Vdc or power-line dimming controls, operating linear fluorescent T8 lamps over 100–5% dimming range. Unit incorporates micro-controller technology and supports OCTRON® lamps from 17–32 W. Streamlined using 2-wire power-line dimmer to eliminate additional control wires, unit integrates circuit to protect ballast against line voltage applied to low-voltage control inputs.

Fortress Interlocks Ltd    Erlanger, KY 41018
Apr 22, 2005 Modular eGuard enables mechanical trapped key interlocks and electrical safety gate switch interlocks to be integrated in one unit. It can connect to PLCs and mimic panels, or can be used on AS-interface network. Customizable for any application, system features self-configuring internal network, quick disconnect electrical connections, polymer body for corrosion resistance, and stainless wear parts.

Cubic Designs Inc.    New Berlin, WI 53151
Apr 22, 2005 Cubic AisleGuards prevent damage to materials and merchandise and protect rack uprights by absorbing impact of forklift, sweeper, or other in-plant vehicle. Modular units offer bolted connections for installation and adjustability. Floor rails are heavy-duty steel angles available in 36, 42, and 48 in. sizes, while corner guard components are ½ x 12 in. formed steel plate. Cubic AisleGuards are protected with powder coat finish available in 14 colors.

Dematic Corp.    Grand Rapids, MI 49505
Apr 22, 2005 Suited for material flow in automated distribution center environment, SortDirector v5.0 provides strategic routing and sorting of cartons or containers. It delivers real-time control of sorters, shipping-consolidation functionality, and helps guide cartons through order-fulfillment zones. Software includes wave planning tools, split-case planning, pick-ticket and label printing, and ostentation logic for reverse-route trailer loading.