PCB Piezotronics Inc.    Depew, NY 14043 2495
May 09, 2005 Flange-mounted Series 2308, 2309, and 2508 strain-gage reaction torque sensors are supplied with shunt calibration resistor and are NIST traceable. Featuring 2 mV/V output sensitivity, products are available in capacities from 5–1,000 lb-in. FS for measuring torque in applications such as lubricant studies, torsion testing, bearing friction, small motor dynamometers, stepping switch torque, and starter testing.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
May 09, 2005 Powered by Intelâ„¢ Celeron® or Pentiumâ„¢ 4 processors with integrated L2 cache, ThinkCentreâ„¢ A51 systems incorporate Intel Graphics Media Accelerator 900 and Intel 915G or 915GV core chipset. Computers, which utilize Hyper-Threading technology, come equipped with SATA HDD, USB 2.0 ports, and integrated 10/100 or Gigabit Ethernet. Supplied in steel enclosure, they support up to 4 Gb DDR2 system memory and come with software tools to backup and protect data.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
May 09, 2005 Powered by Intelâ„¢ Celeron® or Pentiumâ„¢ 4 processors with integrated L2 cache, Think Express models of ThinkCentreâ„¢ A51 systems incorporate Intel Graphics Media Accelerator 900 and Intel 915G or 915GV core chipset. Computers feature Hyper-Threading technology, 8 USB 2.0 ports, and integrated 10/100 or gigabit Ethernet. Supplied in steel enclosure, they support up to 4 Gb DDR2 system memory and come with software tools to backup and protect data.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
May 09, 2005 Featuring steel enclosure with tool-less mechanical design that facilitates servicing and upgrades, ThinkCentreâ„¢ S51 Series incorporates Intelâ„¢ processors, Graphics Media Accelerator 900, and 915GV core chipset. It supports up to 2 Gb DDR1 SDRAM and comes equipped with Hyper-Threading technology, Serial ATA HDD, and Rescue and Recoveryâ„¢ software. Connectivity is provided via USB 2.0 ports and integrated gigabit Ethernet.

Permabond    Somerset, NJ 08873
May 09, 2005 Able to adhere to various substrates, single-part adhesives allow for accurate alignment of components since adhesive will not cure until exposed to UV light. Non-yellowing products, designed for optical clarity, are available in range of viscosities to suit gap fill requirements of joints. Flexible, shock- and impact-resistant grade is also available, suited for areas where differential thermal expansion is of concern.

Leica Geosystems Inc.    Norcross, GA 30092
May 09, 2005 System 1200 GPS is offered with seismic stakeout application software package that ensures field crews do not intrude on exclusion zones when placing seismic charges and sensors. After user enters predefined data set of exclusion zones into System 1200, system will provide audible warning whenever crews attempt to place stake in prohibited area, thereby avoiding damage to nearby water wells, pipelines, or buildings.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
May 09, 2005 Featuring steel enclosure with tool-less mechanical design for upgrades and service, ThinkCentreâ„¢ M51 series utilizes Intelâ„¢ processors and offers Intelâ„¢ Graphics Media Accelerator 900 support. Connectivity is provided via integrated gigabit Ethernet and 8 USB 2.0 ports. Additional offerings include variety of security features, Rescue and Recoveryâ„¢ software, and support for up to 4 Gb DDR1 SDRAM.

Intercomp Co.    Minneapolis, MN 55447-4742
May 09, 2005 With certified calibration to 0.1%, SW-20K corner weight scale system is used in determining center of gravity, validating design weights, measuring down force, and certifying large wheeled vehicles. RS232 Serial Output port is included for data export to various software data logging packages. Each scale pad, machined from billet aluminum, has 5,000 lb capacity and measures 15 x 15 x 4 in. System features ½ in. display characters.

ANCA Pty Ltd    Bayswater North VIC 3153  Australia
May 09, 2005 Suited for X Class range of CNC tools and cutter grinders, Wheel Editor v27 includes key hole punch software for creation of punch geometries from library of shapes. Software also enables creation of customized contours and punches with concave and convex shapes. Additional features include Delta-C R850 drill point sharpening function and Profile Pivot Editor function to optimize feedrate.

SAS Automation, Ltd.    Xenia, OH 45385
May 09, 2005 Multi-function end-of-arm-tooling (EOAT) can pick and place wide variety of shapes including bags, bottles, cans, and boxes. With 250 lb. capacity, tooling eliminates changeovers, can pick up and move empty pallet and load cartons on pallet, palletize and insert slip sheets, secure parts from mold, and adjust centerline of products for immediate packaging. Vacuum zoning has special cups to handle porous surfaces such as corrugated cartons.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
May 09, 2005 Models L3H and F3H, of series 3581, support entry-level unattended backup, open systems attachment flexibility, and enhanced capacity and performance. They include: LVD SCSI native switched fabric 2 Gbps fibre channel, Ultrium 3 autoloader native data capacities up to 3.2 TB with 8 cartridge slots, use of LTO Ultrium 3 Tape Drive with native drive data rate of 80 MB/sec, sequential or random access, and optional bar code reader and/or remote management unit.

Vishay Siliconix    Santa Clara, CA 95054
May 09, 2005 Utilizing high-density silicon technology, n-channel MOSFETs combine 3.4 V threshold voltage with on-resistance as low as 2.7 milliohms to avoid spontaneous turn-on during high-temperature, high-current applications with inductive loads. Products, offered in 10 models rated 40 or 60 V, are manufactured in DPAK, D2PAK, and PowerPAK SO-8 packages. MOSFETs are also suited for use in industrial and fixed telecom industries.

Linear Technology Corp.    Milpitas, CA 95035
May 09, 2005 Designed to operate over input supply range of 1.8-5.5 V, single and dual RS-232 transceiver models LTC2801/2/3/4 ICs integrate boost converter and provide ±10 kV ESD protection on RS-232 pins. Control pins invoke optional shutdown, receiver active, and driver disable features. Featuring 1 µA shutdown current and 15 µA receiver-active current, LTC2802/4 support 1 Mbps data rate for proprietary diagnostic links, while LTC2801/3 support rates to 250 kbps.

Saelig Co., Inc.    Pittsford, NY 14534
May 09, 2005 USB-COM-S series allows RS232 serial devices to talk to USB-enabled PCs. Based on FTDI's single chip FT232BM USB UART IC, products add 1, 2, 4, or 8 RS232 Windows Serial COM ports without requiring card-slots or external power supplies. Supporting data transfer rates to 1 million bps, they feature full set of data and control signals on DB9M connectors, with internal 128-byte transmit buffer FIFO and 384-byte receive buffer FIFO.

Linear Technology Corp.    Milpitas, CA 95035
May 09, 2005 Equipped with processor interrupt logic and adjustable on/off timers, 8-pin LTC2950 delivers enable control for dc/dc converters. It is supplied in 2 versions, each of which operate over 2.7-26 V input, to accommodate positive or negative enable polarities. Suited for portable instruments and handheld products, controller has 6 µA supply current and withstands ±10 kV ESD strikes.

Ampro Computers, Inc.    San Jose, CA 95138-1007
May 09, 2005 Able to run multimedia embedded applications, MightyBoardâ„¢ 800, ReadyBoardâ„¢ 800, LittleBoardâ„¢ 800, and Ampro ETX 800 have fanless design for quiet operation. Embedded BIOS extensions include USB and LAN Boot capability to complement USB 2.0 and Gigabit Ethernet ports. Processor options include 1.4 GHz LV Pentium M 738 (Dothan core, 10 W TDP), 1.0 GHz ULV Celeron® M 373 (Dothan, 5 W TDP), and 600 MHz ULV Celeron M (Banias, 7 W TDP).

OKI Semiconductor    Sunnyvale, CA 94086
May 09, 2005 Suited for wireless communications, KGF1934 power gallium arsenide (GaAs) metal semiconductor field effect transistor (MESFET) achieves max drain efficiency with output power of 10 W at compression point of 1 db. Device also marks 25% in drain efficiency at normal operating output power level of 2 W. Specific applications include transmitter power amplifiers for W-CDMA and CDMA2000 wireless base stations.

GLS Corporation    McHenry, IL 60050
May 09, 2005 Featuring water-clarity and heat resistance, VERSAFLEX® CL 2200 TPE (thermoplastic elastomer) alloys are supplied as injection-moldable pellets with 42 and 50 Shore A hardness. They offer bite and tear resistance, making them suitable for infant care and kitchenware products that require boiling and/or cleaning in hot dishwashers. Also suited for toys and tubing, they can be used in overmolding applications with polypropylene substrates.

Diamond Phoenix Corp.    Lewiston, ME 04241
May 09, 2005 SMARTdepotâ„¢ LX is configured with one delivery window that may be located on floor or within any of 2, 3, or 4 storage bays. SMARTdepot Marquis comes with dual-delivery window configuration, where openings may be located on front or back of machine or within any of 2, 3 or 4 bays. Design enables 2 or more users to simultaneously access items from same inventory. Both machines utilize Cross-bayâ„¢ technology to facilitate item retrieval from all bays.

Superior Industries Of Morris    Morris, MN 56267
May 09, 2005 Featuring hydraulically adjustable discharge height, low-profile truck unloader utilizes hinged, self-cleaning ramps that hydraulically rise to vertical position. Unit has transport position under 12 ft wide and 72 in. wide conveyor belt with discharge hood that directs material onto smaller-width belt. Offering up to 1,500 TPH capacity with no spillage, unit can transfer 25 tons of 100 PCF material from belly- or end-dump trucks in minutes.