Shimadzu Scientific Instruments, Inc.    Columbia, MD 21046
May 25, 2005 Equipped with photomultiplier tube for UV-Vis region and InGaAs and PbS detectors for NIR region, UV-3600 operates over measurement range of 185–3300 nm and produces less than 0.00003 Abs noise at 1,500 nm. Double monochromator ensures stray light level of 0.00005% or less at 340 nm, and Absolute Specular Reflectance attachments ensure accuracy of absolute reflectance measurements. Also included, UV Probe software provides security features and audit trail.

Shimadzu Scientific Instruments, Inc.    Columbia, MD 21046
May 25, 2005 Featuring centralized Web-based instrument control, LC-20A Prominence series includes micro-range solvent delivery with 3 nL/step resolution and dual micro-plunger design. System offers full automation of analysis work, and optical processing provides linearity of 2.5 AU for UV detectors and 2.0 AU for Photo Diode Array. All detectors come with temperature-controlled flow cell and allow for analysis of target compound and minor impurities in one run.

austriamicrosystems AG    Premstätten   Austria
May 25, 2005 Suited for industrial and automotive fields, Model AS5043 provides contactless solution for motion sensing applications. It produces analog voltage proportional to measured angle in addition to 10-bit digital position information. Combining adjustable angle range and analog output voltage range, unit features zero position programming, diagnostic features, and daisy chain mode. Step size of analog output may vary from 0.35°â€“0.09° per step.

Kolinahr Systems, Inc.    Cincinnati, OH 45242
May 25, 2005 Dual Panel SA2200-RF uses Zebraâ„¢ RFID-enabled printer to read, write, and verify EPC-compliant RFID tags embedded in labels it applies to front and/or side of pallet load. PLC-controlled unit features 3 x 3 in. thick rotating arm for label application. If embedded RFID tag cannot be read/written/verified, fault status is displayed. Label removal system disposes of invalid EPC tag after it is dispensed onto tamp pad, prior to application.

JM Science, Inc.    Grand Island, NY 14072-0250
May 25, 2005 AQUACOUNTER® Volumetric Karl Fischer Titrator, model AQV-200, has 6 built-in calculation modes, statistics package with one-touch calculations, and detector that monitors titration status. Featuring direct key access for entry of titration parameters, system enables 4 files with preset conditions to be stored in memory as well as instant recall of data for up to 20 samples. It provides balance and computer interfaces and choice of thermal or impact printer.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 25, 2005 Model 4148 Self-Configuring Normal/Redundant Fallback Switch allows data signals entering switch from 2 origination devices to be channeled to 2 destination devices. Along with Normal and Redundant Fallback modes, product features Crossover position and can also be controlled manually via front-panel push button. It is equipped with 4 front panel LEDs that indicate connectivity status and verify power connection at all times.

ABAQUS, Inc.    Pawtucket, RI 02860-4847
May 25, 2005 ABAQUS® software suite includes VCCT for ABAQUS, which provides users with implementation of Virtual Crack Closure Technique (VCCT) for predicting fracture and failure in laminated composite materials. Compatible with ABAQUS v6.5, add-on simulates delamination, allowing engineers to identify overall load at which crack initiates and predict behavior of structure as crack propagates. It also helps understand stability and load-carrying capacity after failure.

AeroComm Inc.    Lenexa, KS 66219
May 25, 2005 ConnexNet transceivers merge RF protocol with Digi Connect ME® embedded device server to facilitate networking. Units serve as conduit between user and multiple destination devices via local network or Internet connection. They operate at 900 MHz with up to 1 W of scalable output power offered in server/client or peer-to-peer protocols. Transceivers do not require Com port redirector and will support wireless Ethernet bridge, allowing separate networks to communicate.

Gage Applied Technologies, Inc    Lachine, QC H8T 3H7  Canada
May 25, 2005 Available on select 12- and 14-bit Digitizers, optional Signal Averaging FPGA Technology allows users to detect very small signals in noisy environments. Process consists of making multiple acquisitions of repetitive waveform and averaging all acquisitions together. Random noise is averaged to near zero, while amplitude of underlying repetitive signal remains unchanged. Waveforms can be signal-averaged at rate greater than 100,000 waveforms/sec for data processing rate of 800 MB/s.

PerkinElmer, Inc., Optoelectronics Headquarters    Fremont, CA 94538-3180
May 25, 2005 With typical peak power of 75 W at 905 nm wavelength, EPI-Cavity Pulse Laser provides same power as stacked device consisting of multiple laser chips, but comes in single, monolithic chip with emitting area 10 microns high. Plastic-encapsulated package is suited for commercial applications, while hermetically sealed metal package withstands harsh environments. Applications include blind spot detectors, traffic flow monitors, and adaptive cruise control systems.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
May 25, 2005 TotalStorage® 3953 Library Manager Model L05 and Tape Frame Model F05 allow attachment of zSeries® host systems to 3592 Tape Drives Model J1A in TotalStorage 3584 Tape Library. Independent frame, Model F05, houses 3953 Library Manager Model L05 and other components, including FC switches for J70/3592 and VTS/3592 communications, Ethernet switches, and optional redundant Power Distribution Units. Unit can also incorporate TotalStorage Master Console for service.

Iwaki Walchem Corp.    Holliston, MA 01746
May 25, 2005 Non-metallic, centrifugal Series WMD and MD are engineered with internal cooling circuit that uses hollow rotating spindle to create positive, forced cooling path, lubricating bearing surfaces. Double bearing system allows cooling circuit liquid to continually wash front and rear radial bearings. Inner rotating assembly of alumina ceramic or SiC spindles are bored, turned, and polished. Pumps offer max flows to 35.6 and max head of 67 ft.

Applied Motion Products, Inc.    Watsonville, CA 95076
May 25, 2005 Suited for BLu servo drives, Q Programming Software provides flexible programming environment that allows users to create and download complex programs for motion control and I/O handling directly into drive. It can be used to store values and manipulate registers and can operate from stored programs and serial communications simultaneously. Software can also be used to obtain information while stored programmed is running.

Sprint Electric Ltd    Arundel East Susse BN18 0BE  United Kingdom
May 25, 2005 Able to be placed adjacent to other control panel components, non-isolated drives are designed for use with permanent magnet or shunt wound DC motors. Design facilitates access to drive adjustments. Featuring plug-on screw terminals and DIN-rail-mount package, controllers clip into place without further engineering. Power ratings range from 0.55–1.8 kW @ 180 Vdc. Dual voltage supply and selectable avf or tacho feedback are standard.

Ruland Mfg. Co., Inc.    Marlborough, MA 01752
May 25, 2005 Made of acetal with stainless steel hardware for food processing environments, collars are offered in 1- and 2-piece clamp-style designs as well as set screw style. Clamp-style collars will not mar shaft, and design wraps around shaft for optimal holding power. Featuring forged socket hardware, products are single point faced to ensure perpendicularity and proper alignment. Bore sizes range from 1/8–3 in. for inch series and 3–80 mm in metric series.

AMETEK Drexelbrook    Horsham, PA 19044
May 25, 2005 Accurate to 0.15%, USonicâ„¢ Series provides repeatable level measurement of liquids. CPVC construction suits Class I, Div 1 environments with Intrinsically Safe or Explosion Proof installation requirements. Able to handle temperatures from -40 to +158°F and process pressures to 50 psig, transmitter is capable of liquid level measurement to 30 ft with 2-wire, 4–20 mA, HART output signal and comes with integral display and keypad for local configuration.

AMETEK Drexelbrook    Horsham, PA 19044
May 25, 2005 Series TF-100 provides no-calibration solution to point level measurement of clean liquids and is available with relay, current, or PNP outputs. Made of 316 stainless steel, sensor is offered in standard and sanitary versions. When material level reaches predetermined point on sensing element, it causes change in status in electronic unit, resulting in output that can operate alarms, annunciators, valves, or other controls or indicators.

Taylor Hobson, Inc.    West Chicago, IL 60185
May 25, 2005 Freestanding or bench-mounted, portable battery-powered Surtronic 25 features stylus lift mechanism that allows vertical adjustment of 50 mm and rotation of pick-up to different measuring positions, including right angle or inverted measurements. With 2 buttons, user can scroll through menus and make selections before pressing MEASURE key. Multifunction port permits printer connection or export to PC for further surface finish analysis using Talyprofile software.

Banner Engineering Corp.    Minneapolis, MN 55441
May 25, 2005 PICO-GUARD(TM) Series SFI-M12SS consists of IP67-rated, fiber optic, M12 barrel-style interlock switches intended for use with PICO-GUARD controllers in personnel safety and equipment-protection applications. Fibers are polyethylene jacketed with fluoropolymer sheathing for applications that must withstand harsh chemicals and gases. Stainless steel switches provide non-contact means of interlocking doors, guards, gates, and covers.

Dadco, Inc.    Plymouth, MI 48170-2598
May 25, 2005 Measuring 50 mm in diameter, Ultra Forceâ„¢ U.1200 features 30 mm diameter rod providing up to 1.2 tons of force on contact. Unit incorporates UltraPakâ„¢ cartridge technology, which is comprised of bearing and seal that extends gas spring life and maximizes wear characteristics.