AMETEK Drexelbrook    Horsham, PA 19044
May 27, 2005 Radar Series DR7000 and Time Domain Reflectometry Series DR7100 incorporate touch screen display with choice of tank illustration, bargraph, oscilloscope, signal, or reflectivity screen. Utilizing FMCW technology, Series DR7000 features 2 MHz bandwidth that allows units to determine true level in tank despite agitated surfaces and vessel obstructions. Series DR7100 uses electromagnetic wave guided by metallic rod or flexible cable to determine distance, level, and volume.

Parvus Corp.    Salt Lake City, UT 84115 2913
May 27, 2005 OrbiTrakâ„¢ GSM combines wireless tri-band GSM/GPRS connectivity with 12-channel parallel-tracking GPS receiver in single, integrated embedded board. Supporting full interrupt-sharing for all serial ports, board includes 4-channel 16C550 UART with 2 RS-232 serial ports for other devices. A 16-bit wide programmable digital I/O is provided to interface with low-power digital devices, along with 2 automotive level digital inputs to connect to 12 or 24 V digital signals.

BI Technologies Corp.    Fullerton, CA 92835-1051
May 27, 2005 Thin Film Resistor Networks are comprised of 100% matte tin finish over copper lead frame. Housed in all-plastic molded packages, networks are fully compliant to RoHS Directive 2002/95/EC, with no exemptions. Devices undergo process of anneal baking after tin-plating to minimize tin whisker growth.

GE Advanced Materials    Wilton, CT 06897
May 27, 2005 Formulated using halogen-free, flame-retardant technology, D Series LNP(TM) Stat-Loy(TM) resins are impact-resistant, anti-static polycarbonate (PC) compounds that provide surface resistivity performance between 1,011 and 1,012 ohms/sq. Lexan(TM) resin-based LNP compounds are suited for applications such as high-density media, internal hard disk parts, and air duct housings.

ALGOR, Inc.    Pittsburgh, PA 15238
May 27, 2005 ALGOR v17.1 finite element analysis (FEA) software includes FEMPRO interface which provides direct CAD/CAE data exchange and full associativity with most CAD solid modelers. Design, analysis, and simulation capabilities include linear and nonlinear static stress, mechanical event simulation, and linear dynamics, in addition to steady-state and transient heat transfer, steady and unsteady fluid flow, and steady and full multiphysics.

Victrex plc / Victrex USA Inc.    Greenville, SC 29615
May 27, 2005 VICTREX® 90 PEEK products are designed for injection molding thin-walled, intricate components and highly filled compounds. They can replace thermosets, ceramics, and metals in electronic, surface-mount technology and fluid handling applications. Available unfilled or reinforced with glass or carbon fibers, VICTREX 90-based products enable molding of sections thinner than .008 in. Fiber loadings up to 60 wt% are possible without sacrificing surface finish or cycle time.

Quadro Engineering Corp.    Waterloo N2V1A1  Canada
May 27, 2005 Y Jet Mixer utilizes rotor/stator tooling that creates pure axial flow discharge jet to provide instant in-tank mixing and blending. Axial flow pattern produces uniform velocity profile throughout vessel with no stratification or dead areas. Using negative pressures at rotor, by-pass tube draws powders and liquids directly into rotor/stator head for immediate sub-surface dispersion into liquid phase. Five sanitary models are available from 1/3-75 hp.

FCI Electronics    Etters, PA 17319 9769
May 27, 2005 Suited for use in enterprise servers and storage systems, 22-position SATA receptacle connectors and 29-position SAS plug and receptacle connectors provide options for vertical or right-angle connector termination. Two options are provided for HDD interface within drive carrier: use of SAS receptacle provides 2 ports and capability to accept SAS or SATA drives, while SATA receptacle supplies single port and accepts only SATA drive.

Cummins Power Generation Americas    Minneapolis, MN 55432
May 27, 2005 Available in 50 and 60 Hz frequencies, Series DQC consists of 600, 750, and 800 kW generator sets intended for standby and prime power use in wide range of applications. Units include PowerCommand® digital control system for total system integration, including automatic remote starting/stopping, precise frequency and voltage regulation, alarms and status message display, alternator protection, output metering, and auto-shutdown-at-fault detection.

Advantech Co.Ltd.      Taiwan
May 27, 2005 Manufactured in 10.41 x 2.72 x 5.4 in., cast aluminum chassis, ARK-3380 Series offers fanless operation, scalable processing, and customizable I/O. It accepts low-voltage Intel® Celeron/Pentium® M processors to 1.4 GHz and choice of CFC SSD drive or 2.5 in. HDD. Mounted inside machinery or used as standalone product, series includes models with multimedia I/O support (ARK-3380), multiple I/O (ARK-3381), and support for intensive networking capability (ARK-3382).

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 27, 2005 Suited for packaging of vehicle sensors, Macromelt® low-pressure molding solution is composed of polyamide hotmelt and available in various formulations. Material and process solution simultaneously encapsulates sensor's circuitry and forms outer shell of component to enable self-contained, integrated component. Available in translucent amber or black, product is resistant to fluids found in automotive environment.

Toshiba America Information Systems, Inc.    Irvine, CA 92618-1697
May 26, 2005 Able to record up to 12 hr of HD movies, triple-layer HD DVD-ROM disc features data capacity of 45 GB and is approved and standardized at DVD Forum. Double-sided, dual-layer hybrid ROM disc, comprised of dual-layer HD DVD-ROM side and dual-layer DVD-ROM side, stores 30 GB of HD content on HD DVD-ROM side and 8.5 GB of standard-definition content on DVD-ROM dual layer side. Both discs share same disc structure: two 0.6 mm thick discs bonded back-to-back.

Neutronics, Inc.    Exton, PA 19341 2541
May 26, 2005 Suited for both R134A and R12 systems, QuickDetect A/C Sealant Detection Kit includes A/C coupler, hose, test cartridge, and flow meter. When connected to mobile A/C system, it mimics A/C leak. If sealant is present in system, it will quickly solidify in disposable test cartridge and cause flow meter to show no-flow. Except for test cartridges, all Quick Detect components are reusable. Additional cartridges are available separately.

Heraeus Noblelight Inc.    Duluth, GA 30096
May 26, 2005 Suited for production of brake pads, dual-zone, 162 kW oven employs 30 medium-wave emitters on wire belt conveyor for curing anti-corrosion coating that provides protection to pad against water damage during operation. Control panel features 5 selector switches that each control 6 emitters, which may be set to zero, 50%, or 100% power. Control panel also features potentiometer that sets conveyor speed from 0.5–2.0 m/min.

Heraeus Noblelight Inc.    Duluth, GA 30096
May 26, 2005 Ultrapure Water Heater consists of quartz glass twin-tube IR emitter enclosed by larger quartz glass tube with internal gold coating. Offering heating efficiencies exceeding 95%, halogen-free unit can be fit in-line and achieves temperature rises to 80°K depending on liquid throughput and emitter arrangement. Power rating is 6.3 kW for heated length of 600 mm, but heated lengths up to 2 m are possible. Max emission is rated from 900–1,400 nm.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 Measuring ¼ in. thick, CON-TROL-CURE UV-MICROLOG Dâ„¢ data-logging radiometer incorporates microprocessor that measures UV intensity (mW/cm²), UV dose (mJ/cm²), and temperature. Measurements can be viewed as numerical results on 2-line 16-digit display, or graphically after download to computer via USB link. Along with DAQ software, unit features 230–400 nm spectral range, 0–5,000 mW/cm² max power input, 30 sec measuring period, and 0.005 sec sampling rate.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 CON-TROL-CURE MICRO PUCKâ„¢ enables UV measurement in difficult-to-access environments. Available in UV-A, UV-B, UV-C, or full UV measuring ranges, system consists of UV sensor and hand-held base unit with display. MICRO PUCK MULTI accommodates up to 8 different sensors that read from same base unit, enabling full spectrum, 3D UV evaluation. Sensors are available as rectangular or round. Display range is 0–1,999 mJ/cm², standard, or 0–19,990 mJ/cm², x10 type.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 Hand-held UV-Profiler-3000™ measures UV from 250–410 nm, has color viewing screen, and comes with one UV sensor and one temperature sensor. UV-T Profiler series has no onboard viewing screen, but is offered in 4 UV ranges that collectively cover 230–410 nm. Equipped with 3 UV sensors, UV-3C can simultaneously measure UV-A, UV-B, UV-C, and full UV. Model UV-3C-T Profiler radiometer offers ability to measure temperature.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 Diskureâ„¢ 4Scan Radiometers are equipped with 3 UV sensors for individual measuring of UV-A/B/C and total UV. Ability to measure and display UV intensity and UV dose lets users determine total energy and how that energy is delivered. Models include base model, Diskure 4Scan (M007-111); Diskure 4Scan-C, which adds USB port; Diskure 4Scan-T (M007-113), which adds temperature sensor; and Diskure 4Scan-TC (M007-114), which adds USB port and temperature sensor.

UV Process Supply, Inc.    Chicago, IL 60614-4805
May 26, 2005 Equipped with ccDot engine and graphic display, X-RiteDot portable dot-analysis instruments provide digital screen ruling assessment, on-board video dot magnification, and dot shape analysis on any media. They adjust for plate background image and feature 14,000 dpi optics. This allows measurement of AM amplitude modulated screens from 85–250 LPI as well as FM frequency modulated screens as fine as 20 microns. Models include BASICDOT, PLATEDOT, COMBODOT, and PRINTDOT.